product
How to Design Detention Basins
On-DemandOctober 19, 2020Wade Burcham + 1 Other Speaker
Speakers
Wade Burcham
Professional Engineer, Principal Water Resources Engineer with GeosyntecWade Burcham graduated from the University of Alabama in Birmingham. His 21 years of experience has been focused on natural stream stabilization, water resources engineering, stormwater management, municipal engineering and contract administration. This experience has facilitated a balanced viewpoint from perspectives obtained as a civil engineer, a municipal consultant and a developer’s representative. He enjoys learning sustainable and innovative design practices and applying those techniques in developing countries through his volunteer work with Engineering Ministries International and other faith-based mission efforts.
S. Jones
Mobile CountyProfessional Civil Engineer, Environmental Engineer with Mobile County
Mr. Jones graduated from the University of South Alabama with a BS degree in Civil Engineering and Mathematics/ Statistics. His career spans nearly two decades with valuable experience in the public sector, where he gained experience in construction engineering and contract administration and in the private sector, where he gained design experience in water resources engineering and stormwater management. Mr. Jones has also served as City Engineer for the City of Spanish Fort. In his spare time, he enjoys spending time with his wife and three children under the age of five.
How to Design Detention Basins
WebinarNovember 10, 2021Wade Burcham
Speakers
Wade Burcham
Professional Engineer, Principal Water Resources Engineer with GeosyntecWade Burcham graduated from the University of Alabama in Birmingham. His 21 years of experience has been focused on natural stream stabilization, water resources engineering, stormwater management, municipal engineering and contract administration. This experience has facilitated a balanced viewpoint from perspectives obtained as a civil engineer, a municipal consultant and a developer’s representative. He enjoys learning sustainable and innovative design practices and applying those techniques in developing countries through his volunteer work with Engineering Ministries International and other faith-based mission efforts.
How to Design Electric Vehicle Charging Facilities
WebinarAugust 13, 2021Sarah R. Davis
Speakers
Sarah R. Davis, AICP
Founder + CEO | S.R.D. Consulting, LLCA champion of emerging innovative land uses, Ms. Davis has spent over a decade paving the way for integrating technology and sustainability into our urban, suburban, and rural fabrics. Founder and CEO of S. R. D. Consulting – Sustainable. Renewable. Driven. (SRDC), she leverages her experience in the renewable energy and electric vehicle sectors to advance the clean electrification of our grid and transportation systems. Under her leadership, SRDC is committed to infusing sustainable and equitable approaches into regulations, crafting meaningful relationships built on mutual trust and respect with communities, and developing clear, intuitive, and approachable programs + plans. A land use planning firm based in Denver, Colorado, SRDC is focused on advancing sustainable and zero emission projects and plans. In 2020, SRDC had a banner year, including leading the Gold Hill Resilient Renewable Energy Design Project in Boulder County, Colorado, and the Town of Estes Park, Colorado’s Electric Vehicle Infrastructure and Readiness Plan which was recently adopted by the Town Board of Trustees. SRDC was lead project manager and author of the plan.
Prior to pursuing her entrepreneurial aspirations and launching SRDC, she led an interdisciplinary team as Tesla’s Market Lead for EV Infrastructure, developing and deploying over 500 Level 2 & 3 (DC-fast charging) connectors throughout the US. During her tenure, she guided the company’s overall EV charging strategy throughout the Midwest and West using a regional and local approach as well as managed partnerships with private landowners and utilities. SRDC has deep roots within the solar sector, building off of her work as a project planner for Boulder-based juwi solar, Inc. where she led the due diligence and entitlement effort for utility-scale solar PV projects, installing over 250MW of solar nationwide. SRDC’s connections to the solar and emerging energy storage sectors have allowed her to apply lessons learned from integrating into larger utility and local energy generation and demand planning.
Ms. Davis frequently meets with citizens and speaks with groups about EVs, renewable energy, battery storage, and other carbon-free transportation alternatives including micromobility and transit. Her personal car-free lifestyle brings an authenticity to her work in this space. She is a twice graduate from Virginia Tech (Go Hokies!) holding a master’s career of Urban and Regional Planning and a bachelor’s degree in Public and Urban Affairs, Environmental Affairs. She currently serves as an advisor to the Department of Energy funded Solar@Scale initiative, is the Micromobility Subgroup co-chair for the Colorado Electric Vehicle Coalition, a member of the American Planning Association and a member of the American Institute of Certified Planners (AICP). Ms. Davis speaks regularly at urban planning, transportation, sustainability, and renewable energy conferences. In her free time, she enjoys Colorado’s year-round outdoor recreation with her wife and their senior Jack Russell mix Maggie, including hiking, biking, snowshoeing, skiing, paddle boarding, and swimming.
How to Design for Ice and Snow Loads
WebinarNovember 17, 2020Gergis William
Speakers
Gergis William
Senior Structural Engineer at AECOM and Adjunct Associate Professor at West Virginia University
Dr. William is a professional structural engineer with over 25 years of academic and consulting experience in the structural analysis, design, long-term monitoring, and condition assessment of highway bridges and pavement structures. His experience has also extended to the design and construction of water-front structures, as well as industrial and high-rise residential buildings. Dr. William has published over 120 articles in international journals and conference proceedings. He is a member of several national technical committees and has participated in writing four design codes/guidelines published by the American Concrete Institute.
Dr. William has extensive experience with 3D nonlinear finite element analysis of diverse complex structures using LS-DYNA. He has dealt with problems involving mesh construction of complicated geometries, contact, nonlinear material behavior, fracture and failure analysis, and validating results with experimentally measured data. He has experience with lightweight composite structures with an emphasis on automotive lightweighting technologies and lightweight dense hydrogen storage systems. He has also worked on the structural characterization of lightweight composite materials including polymer-reinforced composites and metal matrix composites.
Starting his career as a structural/geotechnical engineer, followed by long experience with long-term field monitoring of the performance of various types of bridges, Dr. William has been exposed to many problems associated with bridge construction and design specifications such as early age full-depth longitudinal cracks in empirically designed bridge decks, transverse deck cracking, out-of-plane web distortion of steel I-girders, and restrained bridge expansion at integral abutment or expansion joints. Dr. William has provided expert assistance in several issues such as early age longitudinal cracking of empirically designed bridge decks and out-of-plane distortion of steel girders through WVDOT/FHWA task force in 2006-2007.
How to Design for Noise Control in Buildings
WebinarJune 21, 2021J. Paul Guyer
Speakers
J. Paul Guyer
J. Paul Guyer, P.E., R.A
Paul Guyer is a registered civil engineer, mechanical engineer, fire protection engineer and architect with 35 years of experience designing buildings and related infrastructure. For an additional nine years he was a principal staff advisor to the California Legislature on capital outlay and infrastructure issues. He is a graduate of Stanford University and has held numerous national, state and local offices with the American Society of Civil Engineers, Architectural Engineering Institute and National Society of Professional Engineers. He is a Fellow of ASCE, AEI and CABE (U.K.).
How to Design for Passive Solar Heating and Cooling
WebinarDecember 6, 2021Heather Holdridge
Speakers
Heather Holdridge, EIT
Associate AIA LEED Fellow, Associate Partner, Sustainability DirectorMs. Holdridge, LEED Fellow, EIT, Associate AIA is the Sustainability Director at Lake|Flato Architects. Leveraging her background in mechanical engineering, she directs all Lake|Flato teams in establishing sustainability goals. Ms. Holdridge devises strategies and systems to realize those goals under programs such as LEED, the 2030 Challenge, and the Living Building Challenge. She works closely with teams to evaluate passive systems and performs energy modeling throughout the design process. Ms. Holdridge received a Bachelor of Science degree in Mechanical Engineering from The University of Texas at Austin and a Master of Business Administration degree from The University of Texas at San Antonio.
How to Design for Passive Solar Heating and Cooling
WebinarSeptember 28, 2021Heather Holdridge
Speakers
Heather Holdridge, EIT
Associate AIA LEED Fellow, Associate Partner, Sustainability DirectorMs. Holdridge, LEED Fellow, EIT, Associate AIA is the Sustainability Director at Lake|Flato Architects. Leveraging her background in mechanical engineering, she directs all Lake|Flato teams in establishing sustainability goals. Ms. Holdridge devises strategies and systems to realize those goals under programs such as LEED, the 2030 Challenge, and the Living Building Challenge. She works closely with teams to evaluate passive systems and performs energy modeling throughout the design process. Ms. Holdridge received a Bachelor of Science degree in Mechanical Engineering from The University of Texas at Austin and a Master of Business Administration degree from The University of Texas at San Antonio.
How to Design for Snow and Ice Loads
WebinarApril 27, 2022Robin M. Closs
Speakers
Robin M. Closs
Robin M. Closs has 15 years of experience as a structural engineer designing and analyzing anything from pipes to multistory buildings in fields such as commercial, power, government, institutional, nuclear, industrial, and residential. She traveled to Long Island in the aftermath of Hurricane Sandy as part of a Code Enforcement Disaster Assistance Response Team. Her engineering knowledge in timber, concrete, steel, masonry, aluminum, and light gauge metal has helped her design new buildings, complete renovations and additions, demolish existing structures, produce mechanical platforms, and design appropriate repairs to roofs, walls, floors, and spillways. Ms Closs is the president of The Engineering Society of Buffalo and currently creates, writes, and edits their newsletter. She also regularly spends time tutoring and greatly enjoys assisting young minds to see the benefits of engineering. She has also acted as the principal coordinator for 80-person volunteer teams, judged inventions, and mentored winners of engineering city competitions. Ms Closs graduated from the Milwaukee School of Engineering with a BS degree in Architectural Engineering with a Structural Specialty. She is a licensed professional engineering in multiple states, is a licensed structural engineer in Illinois, and is certified as a NCEES Model Law Structural Engineer. Her goal is to meet client needs in a positive and timely fashion.
How to Design for Stormwater Management for Ground Mounted Solar Arrays
WebinarJuly 14, 2020Steven Trinkaus
Speakers
Steven Trinkaus, PE
Principal at Trinkaus Engineering, LLC, in Southbury, CTMr. Trinkaus is an internationally-recognized expert in the field of low impact development (LID), having presented at many American Society of Civil Engineers/Environmental & Water Resource Institute (ASCE/EWRI) international conferences and many other regional conferences and workshops on LID and water quality issues. He was invited by the Water Resources Agency in Taichung, Taiwan, to present a 12-hour workshop on LID in December of 2011. Mr. Trinkaus has been an invited presenter and consultant multiple times on stormwater and LID in China and South Korea since 2013. He has designed LID retrofits in Zhenjiang, China. Mr. Trinkaus has reviewed and edited LID reports by Pusan National University and Land & Housing Institute in South Korea. Mr. Trinkaus has written LID design manuals for the towns of Tolland, Plainville, Harwinton, Morris, and East Granby, Connecticut. He has designed many types of LID treatment systems for a variety of residential and commercial applications. Mr. Trinkaus is primary author of the EWRI Filter Strip/Bioswales Task Committee. Mr. Trinkaus is a licensed professional engineer in Connecticut and Maryland. He received a Bachelor of Science degree in Forest Management in 1980 from the University of New Hampshire. Mr. Trinkaus has more than 39 years of experience in the land development field and more than 19 years of experience designing low impact development treatment systems and 10 years writing LID regulations and design manuals.
How to Design for Stormwater Management for Ground-Mounted Solar Arrays
WebinarDecember 29, 2021Steven Trinkaus
Speakers
Steven Trinkaus, PE
Principal at Trinkaus Engineering, LLC, in Southbury, CTMr. Trinkaus is an internationally-recognized expert in the field of low impact development (LID), having presented at many American Society of Civil Engineers/Environmental & Water Resource Institute (ASCE/EWRI) international conferences and many other regional conferences and workshops on LID and water quality issues. He was invited by the Water Resources Agency in Taichung, Taiwan, to present a 12-hour workshop on LID in December of 2011. Mr. Trinkaus has been an invited presenter and consultant multiple times on stormwater and LID in China and South Korea since 2013. He has designed LID retrofits in Zhenjiang, China. Mr. Trinkaus has reviewed and edited LID reports by Pusan National University and Land & Housing Institute in South Korea. Mr. Trinkaus has written LID design manuals for the towns of Tolland, Plainville, Harwinton, Morris, and East Granby, Connecticut. He has designed many types of LID treatment systems for a variety of residential and commercial applications. Mr. Trinkaus is primary author of the EWRI Filter Strip/Bioswales Task Committee. Mr. Trinkaus is a licensed professional engineer in Connecticut and Maryland. He received a Bachelor of Science degree in Forest Management in 1980 from the University of New Hampshire. Mr. Trinkaus has more than 39 years of experience in the land development field and more than 19 years of experience designing low impact development treatment systems and 10 years writing LID regulations and design manuals.
How to Design for Stormwater Management for Ground-Mounted Solar Arrays
WebinarNovember 16, 2020Steven Trinkaus
Speakers
Steven Trinkaus, PE
Principal at Trinkaus Engineering, LLC, in Southbury, CTMr. Trinkaus is an internationally-recognized expert in the field of low impact development (LID), having presented at many American Society of Civil Engineers/Environmental & Water Resource Institute (ASCE/EWRI) international conferences and many other regional conferences and workshops on LID and water quality issues. He was invited by the Water Resources Agency in Taichung, Taiwan, to present a 12-hour workshop on LID in December of 2011. Mr. Trinkaus has been an invited presenter and consultant multiple times on stormwater and LID in China and South Korea since 2013. He has designed LID retrofits in Zhenjiang, China. Mr. Trinkaus has reviewed and edited LID reports by Pusan National University and Land & Housing Institute in South Korea. Mr. Trinkaus has written LID design manuals for the towns of Tolland, Plainville, Harwinton, Morris, and East Granby, Connecticut. He has designed many types of LID treatment systems for a variety of residential and commercial applications. Mr. Trinkaus is primary author of the EWRI Filter Strip/Bioswales Task Committee. Mr. Trinkaus is a licensed professional engineer in Connecticut and Maryland. He received a Bachelor of Science degree in Forest Management in 1980 from the University of New Hampshire. Mr. Trinkaus has more than 39 years of experience in the land development field and more than 19 years of experience designing low impact development treatment systems and 10 years writing LID regulations and design manuals.
How to Design for Wind Loads
On-DemandOctober 28, 2020Gergis William
Speakers
Gergis William
Senior Structural Engineer at AECOM and Adjunct Associate Professor at West Virginia University
Dr. William is a professional structural engineer with over 25 years of academic and consulting experience in the structural analysis, design, long-term monitoring, and condition assessment of highway bridges and pavement structures. His experience has also extended to the design and construction of water-front structures, as well as industrial and high-rise residential buildings. Dr. William has published over 120 articles in international journals and conference proceedings. He is a member of several national technical committees and has participated in writing four design codes/guidelines published by the American Concrete Institute.
Dr. William has extensive experience with 3D nonlinear finite element analysis of diverse complex structures using LS-DYNA. He has dealt with problems involving mesh construction of complicated geometries, contact, nonlinear material behavior, fracture and failure analysis, and validating results with experimentally measured data. He has experience with lightweight composite structures with an emphasis on automotive lightweighting technologies and lightweight dense hydrogen storage systems. He has also worked on the structural characterization of lightweight composite materials including polymer-reinforced composites and metal matrix composites.
Starting his career as a structural/geotechnical engineer, followed by long experience with long-term field monitoring of the performance of various types of bridges, Dr. William has been exposed to many problems associated with bridge construction and design specifications such as early age full-depth longitudinal cracks in empirically designed bridge decks, transverse deck cracking, out-of-plane web distortion of steel I-girders, and restrained bridge expansion at integral abutment or expansion joints. Dr. William has provided expert assistance in several issues such as early age longitudinal cracking of empirically designed bridge decks and out-of-plane distortion of steel girders through WVDOT/FHWA task force in 2006-2007.
How to Design Multi-Family Projects Using Engineered Wood Products
WebinarDecember 16, 2020Scott Lyons + 1 Other Speaker
Speakers
Scott Lyons
Boise Cascade Engineered Wood Products
Mr. Lyons has 15 years’ experience in the building materials industry, including roofing, insulation, granite, dimensional lumber and engineered wood products. He is currently the multi-family/light commercial manager responsible for educating and driving specification for Boise Cascade engineered wood products within that segment.
Nathan Paul
Boise Cascade Engineered Wood ProductsBoise Cascade Engineered Wood Products
Mr. Paul has more than 20 years’ experience educating and consulting with performance-based designers and specifiers across North America. In his current role with Boise Cascade, he is responsible for the specification of engineered wood products within the multifamily and light commercial markets. Mr. Paul regularly gives presentations as an effective means of educating the design community.
How to Design Native Pollinator Habitats: Beauty and Benefits
WebinarMarch 31, 2021Dr. Michael A. Liptak + 1 Other Speaker
Speakers
Dr. Michael A. Liptak, PhD
Senior Ecologist, EnviroScience, Inc.Dr. Michael Liptak is a senior ecologist at EnviroScience, Inc, where he specializes in wetland ecology, wetland restoration, and mitigation wetland design. Dr. Liptak earned a B.S. degree in Biology at the University of Toledo and a Ph.D. degree in Environmental Science at Ohio State University under the noted wetland ecologist Dr. William Mitsch. He has over 25 years of experience in wetlands research and consulting and is a Certified Senior Ecologist (Ecological Society of America). His primary responsibilities at EnviroScience Inc. include wetland mitigation planning, wetland assessments and delineations, technical report preparation, and permitting. Dr. Liptak is a member of the Society of Wetlands Scientists and the Ecological Society of America, and regularly gives seminars on wetland issues and regulations.
Carlyn S. Rocazella
EnviroScience, Inc., Northeast Headquarters, Stow, OhioMs. Rocazella previously acted as the crew lead of the vegetation management program at EnviroScience with a focus on the treatment of exotic and nonnative plants. She is now operating as a full-time biologist and a pollinator conservation specialist with a focus on the identification, monitoring, and conservation of Midwestern, native bee communities. Ms. Rocazella earned her Bachelor of Science in Organismal Biology from Kent State University where she developed her passion for pollinator and bee communities. She has lived in Costa Rica for a cumulative 4 months as a research assistant studying the specific relationships of Neotropical bees and the local plant communities within the Palo Verde National Park. After her return to the States, she worked for the Cleveland Museum of Natural History for 2 years where she identified and helped curate their collection of North American bees. Following this, she worked with the Cuyahoga Valley National Park as a member of their vegetation management crew and acted as their weekly pollinator survey crew lead. Ms. Rocazella’s main responsibilities at EnviroScience include native habitat restoration, pollinator habitat assessment and installation, and performing population surveys for common and endangered bee populations. She has extensive experience in the research process, including preparing methodologies and executing field work necessary for high-quality data acquisition. Additionally, Ms. Rocazella is skilled in a variety of insect surveying methods with a focus on sweep netting, cup trapping, malaise trapping, as well as other techniques. She has previously held a scientific collection permit with the West Virginia Department of Natural Resources for her consultancy work with the Rusty Patched Bumble Bee, and currently holds her Endangered Species Recovery permit with the United States Fish and Wildlife Service for regions 3 and 5 to perform similar work on a federal scale. Ms. Rocazella is passionate about giving presentations about the importance of pollinators and works regularly to educate and excite others about these critical species.
How to Design Stormwater Facilities for Function and Performance with Maintenance in Mind
On-DemandAugust 6, 2020Rob Woodman
Speakers
Rob Woodman, P.E.
National Urban Green Infrastructure Manager – Ferguson WaterworksMr. Woodman graduated in Civil Engineering from the University of Wollongong, Australia. He spent the first 10 years as design and project engineer for a private engineering consulting firm, gaining experience and expanding his knowledge of the industry on a wide variety of civil and stormwater engineering design projects for private and public sector clients throughout New England. In 2014 Mr. Woodman took an opportunity to leverage his expertise in innovative stormwater and green infrastructure treatment systems and transitioned from consulting to the product, solution and innovation side of the industry. Mr. Woodman now serves Ferguson Enterprises as the director of Engineering and Green Stormwater Infrastructure and supports engineers, landscape architects and designers on site development and green infrastructure systems overcoming design and permitting challenges with a suite of innovative solutions. He is a registered professional engineer in Maine and Pennsylvania, a certified professional in erosion and sedimentation control, NGICP certified, a LEED green associate, Maine DEP certified stormwater inspector, ASCE member, and entrepreneur. Mr. Woodman lives in Gorham, Maine, with his wife, Jessi and four children.
How To Design Stormwater Management Systems for Residential Sites
WebinarMay 20, 2021Jeffrey A. Brem
Speakers
Jeffrey A. Brem, P.E.
Owner and Registered Professional Engineer, Meisner Brem CorporationMr. Brem is a registered professional engineer since 1987 in California and holds active registration in Massachusetts, New Hampshire and Maine. He has led his own small civil engineering and land surveying practice for over 36 years with two offices and up to 28 employees. His experience includes designing private land developments, storm water management systems, sanitary sewer systems, wastewater treatment facilities, and roadways. His firm provides land surveying, construction management, engineering site design and a host of other professional services primarily for private, for-profit companies. He has been involved in the design of over 4000 residential single-family house lots many of which were open space or cluster developments, thousands of condominium units, and over 3 million square feet of commercial/ industrial/institutional space. He has advised MassDEP in numerous task forces and committees including as a present full member of the Stormwater Advisory Committee and on the Title 5, Septic System Stakeholders Group. He is currently the past president, past treasurer and member of the Board of Directors for HBRAM (the Massachusetts Homebuilders Association), past president of NEBA, and a national delegate of the National Association of Home Builders (NAHB) based in Washington, DC. In 2024 Mr Brem was appointed by Massachusetts Governor Maura Healey to serve on the prestigious “Unlocking Housing Production Commission” to advise the Governor and the Secretary of Housing and Livable Communities on strategies and recommendations to create over 230,000 new residential units in Massachusetts over the next 10 years. He is a proud 35+ year member of the Westford Rotary Club. He has co-authored, with Harvard Law School Professors Joseph William Singer and Brandon Storm, a legal case study on real estate development entitled the “Case of the Interfaith Neighbors”, July 2016 (PSW021-SM01). In addition to engineering, Mr. Brem has been a land developer and homebuilder recently constructing 25 residential homes in the metrowest area of Massachusetts. He enjoys skiing, golfing, Cape Cod, and his family.
How To Design Stormwater Management Systems for Residential Sites
WebinarNovember 10, 2021Jeffrey A. Brem
Speakers
Jeffrey A. Brem, P.E.
Owner and Registered Professional Engineer, Meisner Brem CorporationMr. Brem is a registered professional engineer since 1987 in California and holds active registration in Massachusetts, New Hampshire and Maine. He has led his own small civil engineering and land surveying practice for over 36 years with two offices and up to 28 employees. His experience includes designing private land developments, storm water management systems, sanitary sewer systems, wastewater treatment facilities, and roadways. His firm provides land surveying, construction management, engineering site design and a host of other professional services primarily for private, for-profit companies. He has been involved in the design of over 4000 residential single-family house lots many of which were open space or cluster developments, thousands of condominium units, and over 3 million square feet of commercial/ industrial/institutional space. He has advised MassDEP in numerous task forces and committees including as a present full member of the Stormwater Advisory Committee and on the Title 5, Septic System Stakeholders Group. He is currently the past president, past treasurer and member of the Board of Directors for HBRAM (the Massachusetts Homebuilders Association), past president of NEBA, and a national delegate of the National Association of Home Builders (NAHB) based in Washington, DC. In 2024 Mr Brem was appointed by Massachusetts Governor Maura Healey to serve on the prestigious “Unlocking Housing Production Commission” to advise the Governor and the Secretary of Housing and Livable Communities on strategies and recommendations to create over 230,000 new residential units in Massachusetts over the next 10 years. He is a proud 35+ year member of the Westford Rotary Club. He has co-authored, with Harvard Law School Professors Joseph William Singer and Brandon Storm, a legal case study on real estate development entitled the “Case of the Interfaith Neighbors”, July 2016 (PSW021-SM01). In addition to engineering, Mr. Brem has been a land developer and homebuilder recently constructing 25 residential homes in the metrowest area of Massachusetts. He enjoys skiing, golfing, Cape Cod, and his family.
How to Design Using Natural Ventilation
WebinarAugust 10, 2021Blake Jackson
Speakers
Blake Jackson, AIA, LEED Fellow, WELL Faculty, Fitwel Amb., CPHC
Director of Sustainability for NORRMr. Jackson is an architect working at the nexus of sustainability, wellness, resiliency, and equity, who serves as the global Director of Sustainability for NORR. NORR is a +800-person integrated architecture, interior design, planning and engineering company, headquartered in Toronto, with 14 locations in the US, UK, UAE, and Canada – serving 12 major buildings sectors. He has 24 years’ experience in the AEC industry, holding a Bachelor of Architecture degree from Kennesaw State University in Marietta, Georgia and a Master of Architecture in Sustainable Environmental Design from the Architectural Association Graduate School in London, England. Mr. Jackson is a prolific author, speaker, and educator on topics affecting the built environment. He currently serves on the Advisory Board for the University of Massachusetts Dartmouth’s Interior Design Program, and from 2016-2018, he was elected to the board of the Boston Society of Architects as their Vice President of Advocacy. In 2015, Mr. Jackson was recognized, nationally, by Building Design and Construction Magazine as a top “40 Under 40” AEC professional, in 2021, he was named a LEED Fellow by the US Green Building Council for his accomplishments in promoting “green” buildings, and in 2024 he was awarded the AIA Young Architects Award.
How to Design, Construct and Maintain a Cost-Effective Permeable Pavement
WebinarDecember 1, 2021David K. Hein
Speakers
David K. Hein, P.Eng.
Principal at 2737493 Ontario Limited, Ontario, CanadaMr. Hein is a consulting civil engineer with over 40 years of experience in the design, evaluation and management of transportation infrastructure. He retired from Applied Research Associates, Inc. of Toronto, Canada, where he managed the 90-person Transportation Infrastructure Division in the U.S. and Canada. Mr. Hein is the past president of the American Society of Civil Engineers Transportation and Development Institute (ASCE T&DI), and chair of several engineering standards committees. He is a member of the Transportation Association of Canada (TAC), past-chair of the pavements committee and past member of the Transportation Research Board pavement management, pavement maintenance and pavement preservation committees. Mr. Hein has been a member of the World Road Association (WRA) pavements and asset management committees since 2002. He has been involved in numerous national and international research, evaluation and asset management projects for Federal, State, Provincial and Municipal agencies and for many of the public/private/partnership highway construction projects across Canada and the United States.
How to Design, Construct and Maintain a Cost-Effective Permeable Pavement
WebinarNovember 19, 2020David K. Hein
Speakers
David K. Hein, P.Eng.
Principal at 2737493 Ontario Limited, Ontario, CanadaMr. Hein is a consulting civil engineer with over 40 years of experience in the design, evaluation and management of transportation infrastructure. He retired from Applied Research Associates, Inc. of Toronto, Canada, where he managed the 90-person Transportation Infrastructure Division in the U.S. and Canada. Mr. Hein is the past president of the American Society of Civil Engineers Transportation and Development Institute (ASCE T&DI), and chair of several engineering standards committees. He is a member of the Transportation Association of Canada (TAC), past-chair of the pavements committee and past member of the Transportation Research Board pavement management, pavement maintenance and pavement preservation committees. Mr. Hein has been a member of the World Road Association (WRA) pavements and asset management committees since 2002. He has been involved in numerous national and international research, evaluation and asset management projects for Federal, State, Provincial and Municipal agencies and for many of the public/private/partnership highway construction projects across Canada and the United States.