Streambank Stabilization

    WebinarApril 10, 2025|9:00 am - 11:00 am CDT
    2.0 Credit Hours

    Credits

    Engineers
    2.0 PDHs

    Architects
    2.0 HSW CE Hours

    AIA - American Institute of Architects
    2.0 HSW LUs

    Landscape Architects
    2.0 HSW CE Hours

    LACES - Landscape Architecture Continuing Education System
    2.0 HSW PDHs

    Floodplain Managers
    2.0 ASFPM CECs

     

    Continuing Education Information

    This webinar is open to the public and is designed to qualify for 2.0 PDHs for professional engineers, 2.0 HSW continuing education hours for licensed architects, and 2.0 HSW continuing education hours for landscape architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

    HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00049300) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers, architects and landscape architects via its registration with the American Institute of Architects Continuing Education System (AIA/CES) and the Landscape Architecture Continuing Education System (LA/CES). Other states do not preapprove continuing education providers or courses.

    The American Institute of Architects Continuing Education System has approved this course for 2.0 HSW LUs(Sponsor No. J885). Only full participation is reportable to the AIA/CES.

    The Landscape Architecture Continuing Education System has approved this course for 2.0 HSW PDHs. Only full participation is reportable to the LA CES.

    The Association of State Floodplain Managers has approved this course for 2.0 CECs for floodplain managers.

    Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

    *On-Demand Credits*

    The preceding credit information only applies to the live presentation. This course in an on-demand format is not pre-approved by any licensing boards and may not qualify for the same credits; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:

    2.0 HSW LUs (AIA)
    2.0 HSW PDHs (LA CES)

    | Matthew Holthaus

    Speakers

    Matthew Holthaus, PE, CFM, ENV.SP, CERP

    Assistant Vice President and Water Resource Engineer in Ecosystem Restoration at WSP USA.

    Mr. Holthaus is an assistant vice president and water resource engineer in Ecosystem Restoration at WSP USA. He is an experienced and licensed civil/environmental engineer and project manager with a demonstrated working history in ecosystem restoration (wetlands and streams). He is skilled in AutoCAD Civil 3D, HEC-RAS, HEC-HMS, ArcGIS, Stormwater Modeling Systems (SMS) CMS and RMA2, regulatory permitting, construction estimates, and construction oversight. Over the last 12 years, he has developed a blend of technical and managerial skills pertaining stream and wetland restoration. With his passion for environmental restoration and goals of leaving a better tomorrow for future generations, he continues to lead and supervise teams in technical studies, design and modeling, drafting and plan development, permitting, construction estimating, and construction supervision for full designbuild projects involved in stream and wetland restoration/mitigation projects across the United States. He additionally serves as the Mid-Atlantic Regional Chapter president for the Society of Ecological Restoration, supporting the networking and expansion of the ecological restoration practice and standards of restoration


    |

    Street Maintenance and Traffic Operations

    WebinarSeptember 28, 2022andSeptember 29, 2022|
    George Lueck

    Speakers

    George Lueck, P.E.

    Retired Engineer from Texas Department of Transportation (TxDOT)

    Mr. Lueck, is a retired engineer with over 17 years of experience with the Texas Department of Transportation (TxDOT). He started his career performing design and surveying for a variety of roadway projects ranging from farm-to-market roads, urban roadways and high design speed facilities in the Waco district. Mr. Lueck later transferred to the construction division, where he provided oversight to statewide districts in the areas of construction project management, construction engineering, inspection and contract claims. After serving in this capacity for over 9 years, he transferred to the transportation planning division. As Assistant Director of Traffic Analysis, he oversaw transportation data collection and reporting, corridor-level plans, and travel demand modeling. He then served the City of Killeen for 11 years as Assistant City Engineer and Director of Transportation. Mr. Lueck had oversight of all operations of the city’s transportation system. He was also charged with ensuring that the city’s transportation system was planned, constructed and maintained in a cost-effective manner to effectively address the region’s growing safety, mobility and reliability needs.


    Structural Condition Reviews  and Structural Failures in New York

    Structural Condition Reviews and Structural Failures in New York

    WebinarAugust 31, 2022
    James A. D’Aloisio

    Speakers

    James A. D’Aloisio, P.E. LEED AP

    Principal with Klepper, Hahn & Hyatt in Syracuse, New York

    Mr. D’Aloisio is a principal with Klepper, Hahn & Hyatt, a structural engineering, landscape architecture, and building envelope services firm in East Syracuse, New York. A graduate of Rensselaer Polytechnic Institute, he is a registered professional engineer in New York. He is a member and past president (1997-1998) of the American Society of Civil Engineers (ASCE) Syracuse Section, and a member of the American Institute of Steel Construction (AISC), the American Concrete Institute (ACI), the National Society of Professional Engineers (NSPE), and the Structural Engineers Association of New York State (SEAoNY). 

    Mr. D’Aloisio has served on ASCE/SEI’s Frost-Protected Shallow Foundations Committee, the Structural Condition Assessment of Existing Buildings Committee, and the SEI Sustainability Committee. Mr. D’Aloisio received the Order of the Engineer at Syracuse University in 1997. 

    His 30-plus years of experience as a consulting structural engineer has primarily involved the design of new building structures, additions, and modifications, and analyses, assessments, and investigations of structures and facades. Mr. D’Aloisio has performed structural condition reviews of over 15 million square feet of buildings, and he has performed over 150 structural forensic investigations. He has presented over 300 times. 

     


    Structural Condition Reviews and Structural Failures in New York

    Structural Condition Reviews and Structural Failures in New York

    WebinarMarch 15, 2024
    7.5 Credit Hours

    Credits

    Engineers
    7.5 PDHs

    Architects
    7.5 HSW CE Hours

    AIA - American Institute of Architects
    7.5 LU|HSW

    ICC - International Code Council
    .75 CEUs (Building)

     

    Continuing Education Credit Information

    This webinar is open to the public and is designed to qualify for 7.5 PDHs for professional engineers and 7.5 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

    HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.

    The American Institute of Architects Continuing Education System has approved this course for 7.5 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

    The International Code Council has approved this event for .75 CEUs in the specialty area of Building (Preferred Provider No. 1232).

    Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

    On-Demand Credits

    The preceding credit information only applies to the live presentation. This course in an on-demand format may not be eligible for the same credits as the live presentation; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:

    7.5 HSW LUs (AIA)

    | James A. D’Aloisio

    Speakers

    James A. D’Aloisio, P.E. LEED AP

    Principal with Klepper, Hahn & Hyatt in Syracuse, New York

    Mr. D’Aloisio is a principal with Klepper, Hahn & Hyatt, a structural engineering, landscape architecture, and building envelope services firm in East Syracuse, New York. A graduate of Rensselaer Polytechnic Institute, he is a registered professional engineer in New York. He is a member and past president (1997-1998) of the American Society of Civil Engineers (ASCE) Syracuse Section, and a member of the American Institute of Steel Construction (AISC), the American Concrete Institute (ACI), the National Society of Professional Engineers (NSPE), and the Structural Engineers Association of New York State (SEAoNY). 

    Mr. D’Aloisio has served on ASCE/SEI’s Frost-Protected Shallow Foundations Committee, the Structural Condition Assessment of Existing Buildings Committee, and the SEI Sustainability Committee. Mr. D’Aloisio received the Order of the Engineer at Syracuse University in 1997. 

    His 30-plus years of experience as a consulting structural engineer has primarily involved the design of new building structures, additions, and modifications, and analyses, assessments, and investigations of structures and facades. Mr. D’Aloisio has performed structural condition reviews of over 15 million square feet of buildings, and he has performed over 150 structural forensic investigations. He has presented over 300 times. 

     


    |

    Structural Design for Wood Construction

    WebinarAugust 11, 2022
    Marcus E. Woods

    Speakers

    Marcus E. Woods, PE & LEED AP

    President, Woods Residential Engineering & Inspection, LLC

    After working in engineering and design management with award-winning structural and construction firms for nearly 10 years, Mr. Woods founded his own firm, Woods Residential Engineering & Inspection. Mr. Woods is a licensed professional engineer in multiple states, and he holds bachelor’s and master’s degrees in Civil Engineering (with a focus on structures) from Washington University in St. Louis. He has earned “Accredited Professional” status from the U.S. Green Building Council. Mr. Woods is a member of the Woods Educational Enrichment Foundation, The National Society of Black Engineers (NSBE) (director of programs for the Chicago professional chapter), The American Society of Civil Engineers, and the Structural Engineers Association of Illinois.


    Structural Design Loads under the ASCE 7-22 Standard

    Structural Design Loads under the ASCE 7-22 Standard

    WebinarApril 26, 2024
    6.5 Credit Hours

    Credits

    Engineers
    6.5 PDHs

    Architects
    6.5 HSW CE Hours

    AIA - American Institute of Architects
    6.5 LU|HSW

    ICC - International Code Council
    .65 CEUs (Building)

     

    Continuing Education Credit Information

    This webinar is open to the public and is designed to qualify for 6.5 PDHs for professional engineers and 6.5 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

    HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.

    The American Institute of Architects Continuing Education System has approved this course for 6.5 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

    The International Code Council has approved this event for .65 CEUs in the specialty area of Building (Preferred Provider No. 1232).

    Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

    On-Demand Credits

    The preceding credit information only applies to the live presentation. This course in an on-demand format may not be eligible for the same credits as the live presentation; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:

    6.5 HSW LUs (AIA)

    | Marcus E. Woods

    Speakers

    Marcus E. Woods, PE & LEED AP

    President, Woods Residential Engineering & Inspection, LLC

    After working in engineering and design management with award-winning structural and construction firms for nearly 10 years, Mr. Woods founded his own firm, Woods Residential Engineering & Inspection. Mr. Woods is a licensed professional engineer in multiple states, and he holds bachelor’s and master’s degrees in Civil Engineering (with a focus on structures) from Washington University in St. Louis. He has earned “Accredited Professional” status from the U.S. Green Building Council. Mr. Woods is a member of the Woods Educational Enrichment Foundation, The National Society of Black Engineers (NSBE) (director of programs for the Chicago professional chapter), The American Society of Civil Engineers, and the Structural Engineers Association of Illinois.


    |
    Structural Design Loads under the ASCE 7-22 Standard

    Structural Design Loads under the ASCE 7-22 Standard

    WebinarSeptember 22, 2022
    Vincent F. Fratinardo

    Speakers

    Vincent F. Fratinardo, P.E. S.E. RRC

    Civil/Structural Engineer and Roof Consultant

    Mr. Fratinardo is a civil/structural engineer and roof consultant. His over 20 years of experience includes civil and structural engineering analysis, design, construction administration, field investigation, and project management, and 13 years of experience specific to forensic engineering and the investigation and analysis of building damage and failures. Mr. Fratinardo has designed numerous new buildings, building additions, building renovations, and mechanical platforms and supports. He has designed and analyzed roof, wall and floor framing systems utilizing steel, concrete, masonry, and wood construction. Mr. Fratinardo has vast expertise in commercial, industrial, agricultural, municipal, educational and residential building damage investigations, including on-site investigations after 25 different tornado events, and Hurricanes Irene, Sandy, Matthew, Harvey, Irma, Maria and Florence. He has legal experience in depositions, arbitration hearings and trials. He has prepared and performed numerous continuing education presentations, including on an array of topics in forensic engineering, structural engineering and building codes for HalfMoon Education Inc., in multiple states since 2014. Mr. Fratinardo graduated from Michigan State University with a bachelor of science degree in Civil Engineering, and he also holds a master of engineering degree in Civil Engineering from Texas A&M University. He is a registered professional engineer in multiple states and a licensed structural engineer in Illinois.


    Structural Design Loads under the ASCE 7-22 Standard

    Structural Design Loads under the ASCE 7-22 Standard

    WebinarMay 12, 2022
    Vincent F. Fratinardo

    Speakers

    Vincent F. Fratinardo, P.E. S.E. RRC

    Civil/Structural Engineer and Roof Consultant

    Mr. Fratinardo is a civil/structural engineer and roof consultant. His over 20 years of experience includes civil and structural engineering analysis, design, construction administration, field investigation, and project management, and 13 years of experience specific to forensic engineering and the investigation and analysis of building damage and failures. Mr. Fratinardo has designed numerous new buildings, building additions, building renovations, and mechanical platforms and supports. He has designed and analyzed roof, wall and floor framing systems utilizing steel, concrete, masonry, and wood construction. Mr. Fratinardo has vast expertise in commercial, industrial, agricultural, municipal, educational and residential building damage investigations, including on-site investigations after 25 different tornado events, and Hurricanes Irene, Sandy, Matthew, Harvey, Irma, Maria and Florence. He has legal experience in depositions, arbitration hearings and trials. He has prepared and performed numerous continuing education presentations, including on an array of topics in forensic engineering, structural engineering and building codes for HalfMoon Education Inc., in multiple states since 2014. Mr. Fratinardo graduated from Michigan State University with a bachelor of science degree in Civil Engineering, and he also holds a master of engineering degree in Civil Engineering from Texas A&M University. He is a registered professional engineer in multiple states and a licensed structural engineer in Illinois.


    Structural Design Loads Under the ASCE 7-22 Standard

    Structural Design Loads Under the ASCE 7-22 Standard

    WebinarOctober 15, 2026|9:00 am - 4:50 pm CDT
    7.0 Credit Hours

    Credits

    Engineers
    7.0 PDHs

    Architects
    7.0 HSW CE Hours

    AIA - American Institute of Architects
    7.0 HSW LUs

    ICC - International Code Council
    0.70 CEUs (Building)

     

    Continuing Education Information

    This webinar is open to the public and is designed to qualify for 7.0 PDHs for professional engineers and 7.0 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

    HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, and New Jersey (Approval No. 24GP00049300). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)).

    The American Institute of Architects Continuing Education System has approved this course for 7.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

    The International Code Council has approved this event for .7 CEUs in the specialty area of Building (Preferred Provider No. 1232).

    Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

    While this course is designed to qualify for credit in all states, licensing boards have final authority with respect to acceptance of credits. We recommend reviewing the rules of your licensing board(s) before undertaking any continuing education activities.

    *On-Demand Credits*

    The credits listed above apply to the live webinar. This course in an on-demand format may not qualify for the same credit. Please refer to specific board rules to determine if an asynchronous, on-demand course is appropriate. The following credits will be included in the on-demand format:

    7.0 HSW LUs (AIA)

    | Scott Hamel

    Speakers

    Scott Hamel, P.E., Ph.D.

    Professor and Chair, University of Alaska Anchorage

    Originally from New Hampshire, Dr. Hamel completed a B.S. degree in Civil Engineering at Worcester Polytechnic Institute in Massachusetts and a master’s degree in Civil Engineering with an emphasis in structures at the University of Colorado at Boulder. Between degrees he worked as a bridge inspector, roadway designer, and bridge engineer in Boston and as a structural engineer in Denver designing hospitals, museums, and courthouses. After earning his license as a professional engineer in Colorado, he returned to school and completed his doctorate in Structural Engineering at the University of Wisconsin-Madison. Dr. Hamel’s research was located at the USDA Forest Products Laboratory in Madison and included a three-year long creep study of wood-plastic composites (WPCs). Dr. Hamel joined the faculty at the University of Alaska Anchorage in 2011, where his current research includes the performance of plywood/polyurethane structural insulated panels (SIPs), the strength of accreted ice on piles at the Port of Alaska, and a reliability analysis of flawed wood-frame structures during seismic events. At UAA, he teaches undergraduate courses in mechanics, structural analysis and steel design, and graduate-level courses that cover loads on structures, structural reliability, advanced structural analysis, finite-element analysis, and advanced steel design.


    |
    Structural Design Loads under the ASCE 7-22 Standard

    Structural Design Loads under the ASCE 7-22 Standard

    WebinarOctober 24, 2025|9:00 am - 4:50 pm CDT
    7.0 Credit Hours

    Credits

    Engineers
    7.0 PDHs

    Architects
    7.0 HSW CE Hours

    AIA - American Institute of Architects
    7.0 HSW LUs

    ICC - International Code Council
    0.7 CEUs (Building)

     

    Continuing Education Information

    This webinar is open to the public and is designed to qualify for 7.0 PDHs for professional engineers and 7.0 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

    HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, and New Jersey (Approval No. 24GP00049300). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.

    The American Institute of Architects Continuing Education System has approved this course for 7.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

    The International Code Council has approved this event for .7 CEUs in the specialty area of Building (Preferred Provider No. 1232).

    Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

    *On-Demand Credits*

    The preceding credit information only applies to the live presentation. This course in an on-demand format is not pre-approved by any licensing boards and may not qualify for the same credits; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:

    7.0 HSW LUs (AIA)

    | Scott Hamel

    Speakers

    Scott Hamel, P.E., Ph.D.

    Professor and Chair, University of Alaska Anchorage

    Originally from New Hampshire, Dr. Hamel completed a B.S. degree in Civil Engineering at Worcester Polytechnic Institute in Massachusetts and a master’s degree in Civil Engineering with an emphasis in structures at the University of Colorado at Boulder. Between degrees he worked as a bridge inspector, roadway designer, and bridge engineer in Boston and as a structural engineer in Denver designing hospitals, museums, and courthouses. After earning his license as a professional engineer in Colorado, he returned to school and completed his doctorate in Structural Engineering at the University of Wisconsin-Madison. Dr. Hamel’s research was located at the USDA Forest Products Laboratory in Madison and included a three-year long creep study of wood-plastic composites (WPCs). Dr. Hamel joined the faculty at the University of Alaska Anchorage in 2011, where his current research includes the performance of plywood/polyurethane structural insulated panels (SIPs), the strength of accreted ice on piles at the Port of Alaska, and a reliability analysis of flawed wood-frame structures during seismic events. At UAA, he teaches undergraduate courses in mechanics, structural analysis and steel design, and graduate-level courses that cover loads on structures, structural reliability, advanced structural analysis, finite-element analysis, and advanced steel design.


    |
    Structural Design Loads under the ASCE7-22 Standard

    Structural Design Loads under the ASCE7-22 Standard

    WebinarMarch 20, 2025|9:00 am - 4:30 pm CDT
    6.5 Credit Hours

    Credits

    Engineers
    6.5 PDHs

    Architects
    6.5 HSW CE Hours

    AIA - American Institute of Architects
    6.5 HSW LUs

    ICC - International Code Council
    .65 CEUs (Building)

     

    Continuing Education Credit Information

    This webinar is open to the public and is designed to qualify for 6.5 PDHs for professional engineers and 6.5 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility. 

    HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00049300) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses. 

    The American Institute of Architects Continuing Education System has approved this course for 6.5 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES. 

    The International Code Council has approved this event for .65 CEUs in the specialty area of Building (Preferred Provider No. 1232). 

    Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed). 

    *On-Demand Credits* 

    The preceding credit information only applies to the live presentation. This course in an on-demand format is not pre-approved by any licensing boards and may not qualify for the same credits; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request: 

    6.5 HSW LUs (AIA) 

    | Marcus E. Woods

    Speakers

    Marcus E. Woods, PE & LEED AP

    President, Woods Residential Engineering & Inspection, LLC

    After working in engineering and design management with award-winning structural and construction firms for nearly 10 years, Mr. Woods founded his own firm, Woods Residential Engineering & Inspection. Mr. Woods is a licensed professional engineer in multiple states, and he holds bachelor’s and master’s degrees in Civil Engineering (with a focus on structures) from Washington University in St. Louis. He has earned “Accredited Professional” status from the U.S. Green Building Council. Mr. Woods is a member of the Woods Educational Enrichment Foundation, The National Society of Black Engineers (NSBE) (director of programs for the Chicago professional chapter), The American Society of Civil Engineers, and the Structural Engineers Association of Illinois.


    |
    Structural Dynamics for Seismic Design

    Structural Dynamics for Seismic Design

    WebinarSeptember 14, 2022
    Eugene H. Brislin Jr.

    Speakers

    Eugene H. Brislin Jr., P.E./S.E.

    Structural Engineer in Summerville, SC

    Mr. Brislin has been a professional engineer for more than 21 years and he has designed many structures and performed many different types of analysis in that time. He has worked for a steel fabricator, an architectural/engineering firm and a seismic consultant, and he has been in private practice for over 13 years. Mr. Brislin earned his BSCE degree from The Citadel in Charleston, South Carolina, and his MSCE degree from the University of South Carolina. He has completed all his course work for his PhD degree but has not completed his dissertation. His graduate study work has been in mathematical elasticity. Mr. Brislin has worked on a wide variety of projects from arenas such as Gund Arena in Cleveland, Ohio, and the Edward Jones Arena in St. Louis, Missouri, to renovation and seismic retrofit of the South Carolina State House and the design of the Columbia South Carolina Museum of Art. He has done stress analysis on weapons systems for the Department of Defense and has consulted on cellular telephone concealment projects. Mr. Brislin’s company routinely performs modal analysis of structures to provide more accurate seismic loads and to reduce the cost of seismic requirements through more advanced analysis techniques. The company is knowledgeable concerning structural dynamics and can perform a full dynamic analysis for complicated structures, and ductility requirements in concrete and masonry as well as welded steel moment connection requirements on toughness of steel.


    Structural Engineering Calculations for Wood Construction

    WebinarAugust 27, 2024
    3.0 Credit Hours

    Credits

    Engineers
    3.0 PDHs

    Architects
    3.0 HSW CE Hours

    AIA - American Institute of Architects
    3.0 LU|HSW

    ICC - International Code Council
    .3 CEUs (Building)

     

    Continuing Education Credit Information

    This webinar is open to the public and is designed to qualify for 3.0 PDHs for professional engineers and 3.0 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility. 

    HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00049300) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses. 

    The American Institute of Architects Continuing Education System has approved this course for 3.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES. 

    The International Code Council has approved this event for .3 CEUs in the specialty area of Building (Preferred Provider No. 1232). 

    Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed). 

    On-Demand Credits

    The preceding credit information only applies to the live presentation. This course in an on-demand format is not pre-approved by any licensing boards and may not qualify for the same credits; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:

    3.0 HSW LUs (AIA) 

    | Brian Craig Johnson + 1 Other Speaker

    Speakers

    Brian Craig Johnson

    Independent Consulting Civil/Structural Engineer in Minnesota

    Mr. Johnson provides structural engineering and forensic inspections in multiple states. His work focuses on staff development, mentoring, proper structural design practices, peer reviews and the investigation of building damage, construction or structural defects and their proper repair, legal support, report writing, expert witness services and expert reports. Mr. Johnson also consults as designer of record or peer reviewer for a variety of building types, including wood-framed single-family townhomes, and two to four-story assisted living, office, hotel, apartment, and condo complexes. He has design experience in big box retail in Florida’s hurricane prone regions, and he has experience with historic buildings codes (UBC, BOCA, SBC). A licensed professional engineer in Minnesota since 2004, Mr. Johnson earned his B.C.E. and M.S.C.E. degrees from the University of Minnesota – Twin Cities. He is also a professional structural engineer in Nebraska.

    Franklin Martin, MBA, BA, AAS, CBO

    President, Construction Consultants International

    Mr. Martin reviews the performance of municipalities who administer the state building code with a special emphasis on those municipalities who hold delegation agreements with the department to perform code administration for public buildings and state licensed facilities. He inspects and plan reviews public buildings and state licensed facility construction projects to verify compliance with approved plans and state building code. Mr. Martin investigates complaints registered regarding application, administration, and enforcement of the state building code. He provides mentoring and aids municipalities in their administration of the state building code. Also, Mr. Marin coordinates the State’s response to disaster events throughout the state.


    |

    Structural Forensic Engineering

    WebinarJune 25, 2026|9:00 am - 3:50 pm CDT
    5.5 Credit Hours

    Credits

    Engineers
    5.5 PDHs

    Architects
    5.5 HSW CE Hours

    AIA - American Institute of Architects
    5.5 HSW LUs

    ICC - International Code Council
    0.55 CEUs (Building)

     

    Continuing Education Information

    This webinar is open to the public and is designed to qualify for 5.5 PDHs for professional engineers and 5.5 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

    HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, and New Jersey (Approval No. 24GP00049300). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.

    The American Institute of Architects Continuing Education System has approved this course for 5.5 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

    The International Code Council has approved this event for .55 CEUs in the specialty area of Building (Preferred Provider No. 1232).

    Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

    *On-Demand Credits*

    The preceding credit information only applies to the live presentation. This course in an on-demand format is not pre-approved by any licensing boards and may not qualify for the same credits; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:

    5.5 HSW LUs (AIA)

    | Casey K. Hemmatyar

    Speakers

    Casey K. Hemmatyar, SE

    President, PSFEG Inc

    As an arbitrator, structural/civil engineer, and expert forensic consultant with nearly four decades of experience, Mr. Hemmatyar has provided extensive expert services for defendants’ and plaintiffs’ attorneys on numerous construction litigation matters throughout the United States and Canada.

    He has been retained as an expert engineer in over one hundred and fifty litigation matters on single and class-action legal cases by the U.S. government, law firms, and insurance carriers at the State and Federal levels, working with both plaintiff and defendant sides.

    Mr. Hemmatyar’s understanding of core engineering and legal concepts has enabled him to effectively assist a wide range of clientele. He brings diversified experience in structural and civil engineering design, and in forensic engineering, investigation, and evaluation. Mr. Hemmatyar also conducts research, has assisted in the development of building codes and standards, and has supervised the construction of domestic and international projects. His experience includes special structures and new buildings as well as modifications, alterations, seismic/hurricane retrofits, and upgrades to existing structures. Mr. Hemmatyar has provided failure analysis, expert consultation, structural forensic investigation, and damage assessment services for numerous litigation and insurance-related matters.

    He actively presents continuing education lectures to audiences of licensed engineers, architects, and general contractors on topics of structural and forensic engineering throughout North America. Mr. Hemmatyar has been the principal structural engineer on projects for clients such as NASA and several other high-profile agencies. Currently, he directs PSFEG and has served as Director for SEAOSC from 2011 to 2013. He has been interviewed by public media, including the History Channel (documentary episode: “Collapse of Ancient Structures”) and Reuters (Mexico City school collapse).


    |
    Structural Forensic Engineering

    Structural Forensic Engineering

    WebinarAugust 10, 2022andAugust 11, 2022|
    Collins O. Y. Ofori-Amanfo

    Speakers

    Collins O. Y. Ofori-Amanfo, P.E.

    Owner and Board Certified Diplomate Forensic Engineer, Principal Engineer

    Mr. Ofori-Amanfo’s broad-based experience includes investigation of collapsed structures, investigation of construction defects and damage, investigation of condensation in building envelopes, evaluation of roof and wall leakage, field water spray testing of windows, and assessment of wind and hail damage. His work also involves giving expert testimony and assisting attorneys in resolving disputes over construction and materials-related problems. Prior to establishing Collins Forensics LLC, Mr. Ofori-Amanfo previously worked for many years at Wiss, Janney, Elstner Associates, Inc. (WJE), the Illinois Department of Transportation, and Twin City Testing Corporation. He received his B.S. degree in Civil Engineering from the University of Science and Technology in Ghana and his M.S. degree in Structural Engineering from the University of Minnesota, Minneapolis. Mr. Ofori-Amanfo is a registered professional engineer in Minnesota, Wisconsin, Iowa, Illinois, North Dakota, Nebraska, and Missouri.


    Structural Forensic Engineering

    Structural Forensic Engineering

    WebinarJune 10, 2022
    Michael Drerup

    Speakers

    Michael Drerup, P.E., F.ASCE

    Drerup Building Performance Engineering, PLLC

    Over the past 28 years, Mr. Drerup has investigated performance concerns at hundreds of buildings and structures. His work has ranged from single family homes to large building collapses. Mr. Drerup has evaluated damage attributable to earthquakes, blast, impact, fire, water intrusion, corrosion, construction defects, and other factors. He has served as a testifying expert in several cases. Mr. Drerup has also developed and retrofit designs for existing buildings. He has previously worked for two prominent forensic engineering firms and an international structural design firm. In 2014, he established Drerup Building Performance Engineering, PLLC with his partner Alicia Díaz de León, PE, SE, AIA, and continues to collaborate with other consultants and laboratories nationwide to investigate a broad range of issues pertaining to structure, enclosure, and construction materials. Mr. Drerup recently completed two terms as a voting member of ASCE’s Board Committee on Technical Advancement. He serves on ASCE’s Joint Task Committee with CROSS-US, and is past chair and a 22-year member of ASCE’s Forensic Engineering Division.


    Structural Forensic Engineering Case Studies

    WebinarNovember 20, 2024|9:00 am - 4:00 pm CST
    6.0 Credit Hours

    Credits

    Engineers
    6.0 PDHs

    Architects
    6.0 HSW CE Hours

    AIA - American Institute of Architects
    6.0 LU|HSW

    ICC - International Code Council
    .6 CEUs (Building)

     

    Continuing Education Credit Information

    This webinar is open to the public and is designed to qualify for 6.0 PDHs for professional engineers and 6.0HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

    HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00049300) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses. 

    The American Institute of Architects Continuing Education System has approved this course for 6.0 HSW LUs(Sponsor No. J885). Only full participation is reportable to the AIA/CES. 

    The International Code Council has approved this event for .6 CEUs in the specialty area of Building (Preferred Provider No. 1232). 

    Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed). 

    On-Demand Credits

    The preceding credit information only applies to the live presentation. This course in an on-demand format is not pre-approved by any licensing boards and may not qualify for the same credits; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request: 

    6.0 HSW LUs (AIA) 

    | James A. D’Aloisio

    Speakers

    James A. D’Aloisio, P.E. LEED AP

    Principal with Klepper, Hahn & Hyatt in Syracuse, New York

    Mr. D’Aloisio is a principal with Klepper, Hahn & Hyatt, a structural engineering, landscape architecture, and building envelope services firm in East Syracuse, New York. A graduate of Rensselaer Polytechnic Institute, he is a registered professional engineer in New York. He is a member and past president (1997-1998) of the American Society of Civil Engineers (ASCE) Syracuse Section, and a member of the American Institute of Steel Construction (AISC), the American Concrete Institute (ACI), the National Society of Professional Engineers (NSPE), and the Structural Engineers Association of New York State (SEAoNY). 

    Mr. D’Aloisio has served on ASCE/SEI’s Frost-Protected Shallow Foundations Committee, the Structural Condition Assessment of Existing Buildings Committee, and the SEI Sustainability Committee. Mr. D’Aloisio received the Order of the Engineer at Syracuse University in 1997. 

    His 30-plus years of experience as a consulting structural engineer has primarily involved the design of new building structures, additions, and modifications, and analyses, assessments, and investigations of structures and facades. Mr. D’Aloisio has performed structural condition reviews of over 15 million square feet of buildings, and he has performed over 150 structural forensic investigations. He has presented over 300 times. 

     


    |
    Structural Forensic Engineering of Buildings

    Structural Forensic Engineering of Buildings

    WebinarJuly 25, 2025|9:00 am - 5:00 pm CDT
    7 Credit Hours

    Credits

    Engineers
    7.0 PDHs

    Architects
    7.0 HSW CE Hours

    AIA - American Institute of Architects
    7.0 HSW LUs

    ICC - International Code Council
    0.7 CEUs (Building)

     

    Continuing Education Information

    This webinar is open to the public and is designed to qualify for 7.0 PDHs for professional engineers and 7.0 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

    HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, and New Jersey (Approval No. 24GP00049300). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.

    The American Institute of Architects Continuing Education System has approved this course for 7.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

    The International Code Council has approved this event for .7 CEUs in the specialty area of Building (Preferred Provider No. 1232).

    Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

    *On-Demand Credits*

    The preceding credit information only applies to the live presentation. This course in an on-demand format is not pre-approved by any licensing boards and may not qualify for the same credits; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:

    7.0 HSW LUs (AIA)

    | James A. D’Aloisio

    Speakers

    James A. D’Aloisio, P.E. LEED AP

    Principal with Klepper, Hahn & Hyatt in Syracuse, New York

    Mr. D’Aloisio is a principal with Klepper, Hahn & Hyatt, a structural engineering, landscape architecture, and building envelope services firm in East Syracuse, New York. A graduate of Rensselaer Polytechnic Institute, he is a registered professional engineer in New York. He is a member and past president (1997-1998) of the American Society of Civil Engineers (ASCE) Syracuse Section, and a member of the American Institute of Steel Construction (AISC), the American Concrete Institute (ACI), the National Society of Professional Engineers (NSPE), and the Structural Engineers Association of New York State (SEAoNY). 

    Mr. D’Aloisio has served on ASCE/SEI’s Frost-Protected Shallow Foundations Committee, the Structural Condition Assessment of Existing Buildings Committee, and the SEI Sustainability Committee. Mr. D’Aloisio received the Order of the Engineer at Syracuse University in 1997. 

    His 30-plus years of experience as a consulting structural engineer has primarily involved the design of new building structures, additions, and modifications, and analyses, assessments, and investigations of structures and facades. Mr. D’Aloisio has performed structural condition reviews of over 15 million square feet of buildings, and he has performed over 150 structural forensic investigations. He has presented over 300 times. 

     


    |
    Structural Forensic Engineering of Buildings

    Structural Forensic Engineering of Buildings

    WebinarAugust 7, 2024
    7.0 Credit Hours

    Credits

    Engineers
    7.0 PDHs

    Architects
    7.0 HSW CE Hours

    AIA - American Institute of Architects
    7.0 LU|HSW

    ICC - International Code Council
    .7 CEUs (Building)

     

    Continuing Education Credit Information

    This webinar is open to the public and is designed to qualify for 7.0 PDHs for professional engineers and 7.0 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

    HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00049300) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.

    The American Institute of Architects Continuing Education System has approved this course for 7.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

    The International Code Council has approved this event for .7 CEUs in the specialty area of Building (Preferred Provider No. 1232).

    Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

    On-Demand Credits

    The preceding credit information only applies to the live presentation. This course in an on-demand format is not pre-approved by any licensing boards and may not qualify for the same credits; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:

    7.0 HSW LUs (AIA)

    | James A. D’Aloisio

    Speakers

    James A. D’Aloisio, P.E. LEED AP

    Principal with Klepper, Hahn & Hyatt in Syracuse, New York

    Mr. D’Aloisio is a principal with Klepper, Hahn & Hyatt, a structural engineering, landscape architecture, and building envelope services firm in East Syracuse, New York. A graduate of Rensselaer Polytechnic Institute, he is a registered professional engineer in New York. He is a member and past president (1997-1998) of the American Society of Civil Engineers (ASCE) Syracuse Section, and a member of the American Institute of Steel Construction (AISC), the American Concrete Institute (ACI), the National Society of Professional Engineers (NSPE), and the Structural Engineers Association of New York State (SEAoNY). 

    Mr. D’Aloisio has served on ASCE/SEI’s Frost-Protected Shallow Foundations Committee, the Structural Condition Assessment of Existing Buildings Committee, and the SEI Sustainability Committee. Mr. D’Aloisio received the Order of the Engineer at Syracuse University in 1997. 

    His 30-plus years of experience as a consulting structural engineer has primarily involved the design of new building structures, additions, and modifications, and analyses, assessments, and investigations of structures and facades. Mr. D’Aloisio has performed structural condition reviews of over 15 million square feet of buildings, and he has performed over 150 structural forensic investigations. He has presented over 300 times. 

     


    |

    Structural Forensic Engineering of Buildings

    WebinarFebruary 26, 2025|9:00 am - 4:50 pm CST
    7.0 Credit Hours

    Credits

    Engineers
    7.0 PDHs

    Architects
    7.0 HSW CE Hours

    AIA - American Institute of Architects
    7.0 HSW LUs

    ICC - International Code Council
    0.7 CEUs (Building)

     

    Continuing Education Credit Information

    This webinar is open to the public and is designed to qualify for 7.0 PDHs for professional engineers and 7.0 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility. 

     HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00049300) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses. 

    The American Institute of Architects Continuing Education System has approved this course for 7.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES. 

    The International Code Council has approved this event for .7 CEUs in the specialty area of Building (Preferred Provider No. 1232). 

    Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed). 

    On-Demand Credits 

    The preceding credit information only applies to the live presentation. This course in an on-demand format is not pre-approved by any licensing boards and may not qualify for the same credits; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request: 

    7.0 HSW LUs (AIA) 

    | James A. D’Aloisio

    Speakers

    James A. D’Aloisio, P.E. LEED AP

    Principal with Klepper, Hahn & Hyatt in Syracuse, New York

    Mr. D’Aloisio is a principal with Klepper, Hahn & Hyatt, a structural engineering, landscape architecture, and building envelope services firm in East Syracuse, New York. A graduate of Rensselaer Polytechnic Institute, he is a registered professional engineer in New York. He is a member and past president (1997-1998) of the American Society of Civil Engineers (ASCE) Syracuse Section, and a member of the American Institute of Steel Construction (AISC), the American Concrete Institute (ACI), the National Society of Professional Engineers (NSPE), and the Structural Engineers Association of New York State (SEAoNY). 

    Mr. D’Aloisio has served on ASCE/SEI’s Frost-Protected Shallow Foundations Committee, the Structural Condition Assessment of Existing Buildings Committee, and the SEI Sustainability Committee. Mr. D’Aloisio received the Order of the Engineer at Syracuse University in 1997. 

    His 30-plus years of experience as a consulting structural engineer has primarily involved the design of new building structures, additions, and modifications, and analyses, assessments, and investigations of structures and facades. Mr. D’Aloisio has performed structural condition reviews of over 15 million square feet of buildings, and he has performed over 150 structural forensic investigations. He has presented over 300 times. 

     


    |