product

Jessica J.O. King  Attorney, Williams Mullen
Jessie King focuses her practice on environmental legal issues. A former chief attorney for the Environmental Quality Control Division of the South Carolina Department of Health and Environmental Control (SCDHEC), she has substantial experience helping companies and individuals obtain environmental permits, respond to notices of violation and environmental lawsuits, understand regulatory requirements, perform due diligence and negotiate business transactions. Jessie’s experience spans regulatory, litigation and transactional matters. She has worked with clients – including manufacturers, landfill owners, miners, farmers, developers, landlords, tenants and banks – on matters such as permitting, enforcement, compliance, Brownfields redevelopment, lending, foreclosure and bankruptcy. Her experience over the last 25 years spans matters affecting land, air and water including solid waste, hazardous waste, emerging contaminants, Superfund sites, air emissions permitting, discharge, stormwater and wastewater permitting, wetlands, underground and aboveground storage tank registration and permitting, and hazardous and toxic substance reporting.Jessie has been recognized as a leading environmental attorney by Chambers USA (2017-present), named among Columbia Business Monthly’s ”Legal Elite” (2013-present) and listed in The Best Lawyers in America© for Environmental Law and Litigation – Environmental (2018-present). In The Best Lawyers in America©, she was named the Columbia “Lawyer of the Year” for Litigation – Environmental (2020, 2022).An active professional and community volunteer, Jessie is a member of Trinity Episcopal Church in Columbia and has served on the board of the Columbia Development Corporation for almost 10 years. She currently serves as president of the Carolinas Air Pollution Control Association (CAPCA) and was a founding board member of the Commercial Real Estate Women (CREW) – Midlands chapter. In addition, Jessie is currently an active member of the South Carolina Aggregates Association (SCAA), the South Carolina Solid Waste Association of North America (SWANA) – Palmetto Chapter, the South Carolina Manufacturers Alliance (SCMA), the North Carolina Manufacturers Alliance (NCMA) and the National Waste and Recycling Association (NWRA) – Southeast Chapter. She earned her Juris Doctor from the University of South Carolina and her Bachelor of Arts from Roanoke College. 

Scott N. Mortimer Senior Project Manager, Aegis Environmental
Scott Mortimer has more than 25 years of experience in the environmental services industry in both private and federal markets. Responsibilities include project management, project QA/QC, compliance, and reporting, cost estimating, scheduling and planning. He has assisted clients in obtaining local land disturbance permits, construction general stormwater permits, and industrial stormwater general permits for numerous industry sectors including: power generation (solar, gas transmission, and coal combustion residuals); wood and timber products; concrete and gypsum products; chemical manufacturing; paper manufacturing; food and kindred products; and landfills. Through this permitting and compliance support, he has prepared countless Stormwater Pollution Prevention Plans (SWPPP) and guided his clients through associated permit-required inspections, monitoring and reporting. His projects have ranged from disturbances of less than 1 acre for minor site/equipment modifications, to having site-wide E&S monitoring responsibilities for a 6,500 acre solar power project under construction. He has a working knowledge of Federal, applicable state, local, and DOT regulations concerning all aspects of project implementation, compliance, permitting, and disposal issues. He routinely conducts environmental compliance training through the various media: water, waste, oil, etc.

Dr. El Masri is a structural engineer renowned for his distinctive design and research expertise within the field of bridge engineering. His extensive background includes concrete and steel bridge rehabilitation, replacement design, in-depth structural inspections, and load rating assessments. Dr. El Masri has actively contributed to the design and rehabilitation of various bridge types across states such as Ohio, Kentucky, New York, Pennsylvania, and Massachusetts. He earned his Ph.D. in Civil Engineering and MBA from Syracuse University. Dr. El Masri has taught undergraduate and graduate level courses at Syracuse University including Bridge Engineering courses, and has co-authored multiple papers in prestigious international journals in the field of bridge/structural engineering.

Mr. Tuck has more than 50 years of experience in the materials testing and construction inspection industry. He has been a code influencer. In the early 1990’s, he published a 47-page Construction Specifications Institute (CSI) monograph entitled BOCA Special Inspection Services as a learning and teaching tool for testing agencies, architects, engineers, municipalities, and building officials, etc. This document became the foundation for the original Chesterfield County, Virginia, special inspection program which today is known to be one of the best special inspection programs in the region. This CSI monograph impacted and assisted the development of special inspection programs of many other Virginia jurisdictions during the early days of BOCA and IBC. Today, Mr. Tuck is the building code “go to” guy when architects, engineers, contractors and building officials across the Mid-Atlantic have special inspection questions about their ongoing projects.

Mr. Tuck started his career with Froehling & Robertson in 1964 as a materials technician and fulfilled many duties including senior field technician, radiographic assistant, drill rig operator, laboratory technician, and structural steel inspector, quickly being promoted to branch manager of the Roanoke office in 1966. Over the next few decades, Mr. Tuck also managed F&R’s operations in Norfolk, Lynchburg, and Chesapeake, Virginia. During this time, he was designated as the company-wide manager of construction materials testing services, working in F&R’s Richmond headquarters. In the late 1990’s, Mr. Tuck took on company business development. His success in this realm led to Mr. Tuck being elevated to the role of vice president of business development. His responsibilities in this role included hiring, training, and supervising business development managers throughout the company’s Mid-Atlantic footprint. F&R was established in 1881 and is one of the oldest consulting engineering firms and testing agencies in the United States.

Mr. Tuck developed training courses related to special inspection requirements of the International Building Code (IBC) and the various statewide building codes in jurisdictions where F&R maintains operations, including Maryland, Virginia, District of Columbia and the Carolinas. He cultivated and expanded inter-company special inspections code training courses for F&R’s technicians, special inspectors and engineers. These technical code training courses formed the basis of F&R’s Continuing Education Program and Lunch & Learn Series which are comprised of building code training courses regarding soils, geotechnical engineering, concrete, masonry, sprayed fire-resistant materials, structural steel and many other disciplines. These courses are now offered to the entire Mid-Atlantic community of architects, engineers, construction professionals as well as associations, municipalities, school systems and a host of other market sectors. As F&R’s very first executive director of code compliance and training, Mr. Tuck has provided special inspections training and code training to hundreds of firms and thousands of professionals over the past decade and has dedicated this phase of his professional career to the study and instruction of the various building code changes throughout the different code cycles. He also is well versed in the major code changes of the “enforcer” codes such as AWS (welding), AISC (steel), ACI 318 (concrete), ACI 530 (masonry), in addition to the latest revisions of the International Building Code (IBC) and statewide codes within F&R’s geographical region.

Mr. Savage has been in the inspection field for more than 25 years. He has been a plans examiner, a combination inspector, a chief inspector and chief building official. Mr. Savage has completed plan reviews and inspections on all types of structures from single-family dwellings, decks and sheds to micro-breweries and manufacturing/industrial facilities. He currently serves as the director of building safety/building official for Marion County, Florida. Mr. Savage holds 42 International Code Council certifications, including master code professional and certified building official. In addition, he is a NFPA-certified fire protection specialist (CFPS) and IAEI certified electrical inspector – master. He is also licensed as a building, electrical, plumbing, and mechanical inspector in the State of Maryland, and he is a qualified electrical inspector in the State of Delaware. Mr. Savage is also licensed as a building, electrical, plumbing and mechanical inspector in the State of New Mexico. He is actively involved in the code making processes and holds committee memberships on such bodies as NFPA, IAEI and UL, and he is a member of the International Code Council (ICC) Board of Directors. Mr. Savage’s past positions include the following: president of the Central New Mexico Chapter of Building Officials, president of the IAEI NM Chapter, ICC Region XI Development Committee and past president and Executive Council member of Region XI. Mr. Savage was appointed to the ICC-Evaluation Services Board of Managers in 2015, the ICC Compliance Code Action Committee (CCAC) and the ICC Code Correlation Committee (CCC). He has taught, and implemented, special inspections programs throughout the country resulting in safer, code-compliant buildings.

Mr. D’Aloisio is a principal with Klepper, Hahn & Hyatt, a structural engineering, landscape architecture, and building envelope services firm in East Syracuse, New York. A graduate of Rensselaer Polytechnic Institute, he is a registered professional engineer in New York. He is a member and past president (1997-1998) of the American Society of Civil Engineers (ASCE) Syracuse Section, and a member of the American Institute of Steel Construction (AISC), the American Concrete Institute (ACI), the National Society of Professional Engineers (NSPE), and the Structural Engineers Association of New York State (SEAoNY). 

Mr. D’Aloisio has served on ASCE/SEI’s Frost-Protected Shallow Foundations Committee, the Structural Condition Assessment of Existing Buildings Committee, and the SEI Sustainability Committee. Mr. D’Aloisio received the Order of the Engineer at Syracuse University in 1997. 

His 30-plus years of experience as a consulting structural engineer has primarily involved the design of new building structures, additions, and modifications, and analyses, assessments, and investigations of structures and facades. Mr. D’Aloisio has performed structural condition reviews of over 15 million square feet of buildings, and he has performed over 150 structural forensic investigations. He has presented over 300 times. 

Mr. D’Aloisio is a principal with Klepper, Hahn & Hyatt, a structural engineering, landscape architecture, and building envelope services firm in East Syracuse, New York. A graduate of Rensselaer Polytechnic Institute, he is a registered professional engineer in New York. He is a member and past president (1997-1998) of the American Society of Civil Engineers (ASCE) Syracuse Section, and a member of the American Institute of Steel Construction (AISC), the American Concrete Institute (ACI), the National Society of Professional Engineers (NSPE), and the Structural Engineers Association of New York State (SEAoNY). 

Mr. D’Aloisio has served on ASCE/SEI’s Frost-Protected Shallow Foundations Committee, the Structural Condition Assessment of Existing Buildings Committee, and the SEI Sustainability Committee. Mr. D’Aloisio received the Order of the Engineer at Syracuse University in 1997. 

His 30-plus years of experience as a consulting structural engineer has primarily involved the design of new building structures, additions, and modifications, and analyses, assessments, and investigations of structures and facades. Mr. D’Aloisio has performed structural condition reviews of over 15 million square feet of buildings, and he has performed over 150 structural forensic investigations. He has presented over 300 times. 

Mr. Tuck has more than 50 years of experience in the materials testing and construction inspection industry. He has been a code influencer. In the early 1990’s, he published a 47-page Construction Specifications Institute (CSI) monograph entitled BOCA Special Inspection Services as a learning and teaching tool for testing agencies, architects, engineers, municipalities, and building officials, etc. This document became the foundation for the original Chesterfield County, Virginia, special inspection program which today is known to be one of the best special inspection programs in the region. This CSI monograph impacted and assisted the development of special inspection programs of many other Virginia jurisdictions during the early days of BOCA and IBC. Today, Mr. Tuck is the building code “go to” guy when architects, engineers, contractors and building officials across the Mid-Atlantic have special inspection questions about their ongoing projects.

Mr. Tuck started his career with Froehling & Robertson in 1964 as a materials technician and fulfilled many duties including senior field technician, radiographic assistant, drill rig operator, laboratory technician, and structural steel inspector, quickly being promoted to branch manager of the Roanoke office in 1966. Over the next few decades, Mr. Tuck also managed F&R’s operations in Norfolk, Lynchburg, and Chesapeake, Virginia. During this time, he was designated as the company-wide manager of construction materials testing services, working in F&R’s Richmond headquarters. In the late 1990’s, Mr. Tuck took on company business development. His success in this realm led to Mr. Tuck being elevated to the role of vice president of business development. His responsibilities in this role included hiring, training, and supervising business development managers throughout the company’s Mid-Atlantic footprint. F&R was established in 1881 and is one of the oldest consulting engineering firms and testing agencies in the United States.

Mr. Tuck developed training courses related to special inspection requirements of the International Building Code (IBC) and the various statewide building codes in jurisdictions where F&R maintains operations, including Maryland, Virginia, District of Columbia and the Carolinas. He cultivated and expanded inter-company special inspections code training courses for F&R’s technicians, special inspectors and engineers. These technical code training courses formed the basis of F&R’s Continuing Education Program and Lunch & Learn Series which are comprised of building code training courses regarding soils, geotechnical engineering, concrete, masonry, sprayed fire-resistant materials, structural steel and many other disciplines. These courses are now offered to the entire Mid-Atlantic community of architects, engineers, construction professionals as well as associations, municipalities, school systems and a host of other market sectors. As F&R’s very first executive director of code compliance and training, Mr. Tuck has provided special inspections training and code training to hundreds of firms and thousands of professionals over the past decade and has dedicated this phase of his professional career to the study and instruction of the various building code changes throughout the different code cycles. He also is well versed in the major code changes of the “enforcer” codes such as AWS (welding), AISC (steel), ACI 318 (concrete), ACI 530 (masonry), in addition to the latest revisions of the International Building Code (IBC) and statewide codes within F&R’s geographical region.

Mr. Tuck has more than 50 years of experience in the materials testing and construction inspection industry. He has been a code influencer. In the early 1990’s, he published a 47-page Construction Specifications Institute (CSI) monograph entitled BOCA Special Inspection Services as a learning and teaching tool for testing agencies, architects, engineers, municipalities, and building officials, etc. This document became the foundation for the original Chesterfield County, Virginia, special inspection program which today is known to be one of the best special inspection programs in the region. This CSI monograph impacted and assisted the development of special inspection programs of many other Virginia jurisdictions during the early days of BOCA and IBC. Today, Mr. Tuck is the building code “go to” guy when architects, engineers, contractors and building officials across the Mid-Atlantic have special inspection questions about their ongoing projects.

Mr. Tuck started his career with Froehling & Robertson in 1964 as a materials technician and fulfilled many duties including senior field technician, radiographic assistant, drill rig operator, laboratory technician, and structural steel inspector, quickly being promoted to branch manager of the Roanoke office in 1966. Over the next few decades, Mr. Tuck also managed F&R’s operations in Norfolk, Lynchburg, and Chesapeake, Virginia. During this time, he was designated as the company-wide manager of construction materials testing services, working in F&R’s Richmond headquarters. In the late 1990’s, Mr. Tuck took on company business development. His success in this realm led to Mr. Tuck being elevated to the role of vice president of business development. His responsibilities in this role included hiring, training, and supervising business development managers throughout the company’s Mid-Atlantic footprint. F&R was established in 1881 and is one of the oldest consulting engineering firms and testing agencies in the United States.

Mr. Tuck developed training courses related to special inspection requirements of the International Building Code (IBC) and the various statewide building codes in jurisdictions where F&R maintains operations, including Maryland, Virginia, District of Columbia and the Carolinas. He cultivated and expanded inter-company special inspections code training courses for F&R’s technicians, special inspectors and engineers. These technical code training courses formed the basis of F&R’s Continuing Education Program and Lunch & Learn Series which are comprised of building code training courses regarding soils, geotechnical engineering, concrete, masonry, sprayed fire-resistant materials, structural steel and many other disciplines. These courses are now offered to the entire Mid-Atlantic community of architects, engineers, construction professionals as well as associations, municipalities, school systems and a host of other market sectors. As F&R’s very first executive director of code compliance and training, Mr. Tuck has provided special inspections training and code training to hundreds of firms and thousands of professionals over the past decade and has dedicated this phase of his professional career to the study and instruction of the various building code changes throughout the different code cycles. He also is well versed in the major code changes of the “enforcer” codes such as AWS (welding), AISC (steel), ACI 318 (concrete), ACI 530 (masonry), in addition to the latest revisions of the International Building Code (IBC) and statewide codes within F&R’s geographical region.

Mr. Shaw is a certified floodplain manager and has worked within the flood mitigation industry for over 15 years. As Senior Vice President in Sales and Marketing at Floodproofing.com, he leads a team of flood mitigation specialists that focus on proper floodproofing techniques to ensure resilient structures. Floodproofing.com is a turnkey supply company of floodproofing products that specializes in flood barriers, floodproof windows, and flood vents. The team of certified floodplain managers, flood mitigation specialists, and engineers provide the industry with a portfolio of innovative dry and wet floodproofing systems. Their flood design services assist with engineering and design, floodproofing analysis and assessment options, to code compliance and flood insurance consulting.

Ms. Zeis graduated in December of 2007 with a BS degree in Civil Engineering from North Dakota State University. She began her career in the swimming pool industry in 2008 while working for a hospitality architecture design firm. Her role was to provide the engineering to help the firm, and its clients, navigate the new federal laws addressing water safety and accessibility. Ms. Zeis provided guidance to several states in their development of legislation to address the Virginia Graeme Baker Act, ADA and ANSI Regulations. After leaving the architecture firm, she continued to provide consulting and design services to her clients and grew her client base to include municipalities, HOAs, resort and community pool associations. As she grew in her experience, her company has grown and provides design for everything from high-end residential projects to large water parks. In April of 2018 Ms. Zeis founded Aquatic Engineering Consultants, LLC (AEC), where she and her staff have adopted the mantra of “Solutions. Integrity. Excellence.” AEC strives to provide the best engineering solutions that meet the client’s vision while providing the best user experience. Licensed in over 21 states and with 16+ years in the industry, Ms. Zeis has experience with all types of site challenges, evolving regulations, advances in equipment and related technologies.

Ms. Zeis graduated in December of 2007 with a BS degree in Civil Engineering from North Dakota State University. She began her career in the swimming pool industry in 2008 while working for a hospitality architecture design firm. Her role was to provide the engineering to help the firm, and its clients, navigate the new federal laws addressing water safety and accessibility. Ms. Zeis provided guidance to several states in their development of legislation to address the Virginia Graeme Baker Act, ADA and ANSI Regulations. After leaving the architecture firm, she continued to provide consulting and design services to her clients and grew her client base to include municipalities, HOAs, resort and community pool associations. As she grew in her experience, her company has grown and provides design for everything from high-end residential projects to large water parks. In April of 2018 Ms. Zeis founded Aquatic Engineering Consultants, LLC (AEC), where she and her staff have adopted the mantra of “Solutions. Integrity. Excellence.” AEC strives to provide the best engineering solutions that meet the client’s vision while providing the best user experience. Licensed in over 21 states and with 16+ years in the industry, Ms. Zeis has experience with all types of site challenges, evolving regulations, advances in equipment and related technologies.

Mr. Horton has provided technician training and continuing education seminars for the land surveying industry since 2005.

Mr. Horton served in the US Air Force and with the Illinois Department of Transportation in planning, design, construction, surveying and maintenance of civil engineering projects including commercial structures, airfields, utility systems and highways. He joined the full-time faculty at Parkland College in Champaign, IL, where he taught land surveying and construction management courses for 25 years. He founded the land surveying associate degree program at Parkland College in 2001.

Having retired from full-time teaching, Mr. Horton has joined Farnsworth Group Inc. as a part-time senior project land surveyor. You can reach him at todd@meridiangeospatial.com.

Mr. Horton has provided technician training and continuing education seminars for the land surveying industry since 2005.

Mr. Horton served in the US Air Force and with the Illinois Department of Transportation in planning, design, construction, surveying and maintenance of civil engineering projects including commercial structures, airfields, utility systems and highways. He joined the full-time faculty at Parkland College in Champaign, IL, where he taught land surveying and construction management courses for 25 years. He founded the land surveying associate degree program at Parkland College in 2001.

Having retired from full-time teaching, Mr. Horton has joined Farnsworth Group Inc. as a part-time senior project land surveyor. You can reach him at todd@meridiangeospatial.com.

Mr. Horton has provided technician training and continuing education seminars for the land surveying industry since 2005.

Mr. Horton served in the US Air Force and with the Illinois Department of Transportation in planning, design, construction, surveying and maintenance of civil engineering projects including commercial structures, airfields, utility systems and highways. He joined the full-time faculty at Parkland College in Champaign, IL, where he taught land surveying and construction management courses for 25 years. He founded the land surveying associate degree program at Parkland College in 2001.

Having retired from full-time teaching, Mr. Horton has joined Farnsworth Group Inc. as a part-time senior project land surveyor. You can reach him at todd@meridiangeospatial.com.

Mr. Horton has provided technician training and continuing education seminars for the land surveying industry since 2005.

Mr. Horton served in the US Air Force and with the Illinois Department of Transportation in planning, design, construction, surveying and maintenance of civil engineering projects including commercial structures, airfields, utility systems and highways. He joined the full-time faculty at Parkland College in Champaign, IL, where he taught land surveying and construction management courses for 25 years. He founded the land surveying associate degree program at Parkland College in 2001.

Having retired from full-time teaching, Mr. Horton has joined Farnsworth Group Inc. as a part-time senior project land surveyor. You can reach him at todd@meridiangeospatial.com.

Mr. Horton has provided technician training and continuing education seminars for the land surveying industry since 2005.

Mr. Horton served in the US Air Force and with the Illinois Department of Transportation in planning, design, construction, surveying and maintenance of civil engineering projects including commercial structures, airfields, utility systems and highways. He joined the full-time faculty at Parkland College in Champaign, IL, where he taught land surveying and construction management courses for 25 years. He founded the land surveying associate degree program at Parkland College in 2001.

Having retired from full-time teaching, Mr. Horton has joined Farnsworth Group Inc. as a part-time senior project land surveyor. You can reach him at todd@meridiangeospatial.com.

Named by Landscape Ontario as 2020 and 2021’s Garden Communicator of the Year, gardening has been Mr. James’ hobby and profession for over 40 years. A graduate of Niagara Parks School of  Horticulture, a Master Gardener, writer, and teacher, he focuses on eco-gardening techniques, which makes sense since he grew up surrounded by nature. He has spoken from the Maritimes to Seattle and landscaped from Nova Scotia to California. Mr. James has had the honor to be part of creating the Ontario Landscape Tree Planting Guide, the Grow-Me-Instead guide, the Ontario Horticultural Apprenticeship Curriculum and the national Red Seal Occupational Standard, and the Master Gardeners Reference Manual. He has participated in chairing the Environmental Stewardship Committee for Landscape Ontario, the Environmental Committee for the Perennial Plant Association, moderating the Master Gardeners of Ontario Facebook page, judging the All-American Selections garden competition and Hamilton’s Monarch Awards. Mr. James has been the Ontario spokesperson for Garden Days Canada and he has appeared on many radio shows and on television and has instructed at the college level for 17 years. He owns ‘Sean James Consulting & Design’.

Mr. Taylor grew up in Purvis, Mississippi. He earned his Bachelor of Science degree in Architectural Engineering Technology at the University of Southern Mississippi. He began his career as a plumbing designer in Houston straight out of college. Mr. Taylor began by designing different types of local commercial projects. After two years, he advanced to senior plumbing designer at HOK, one of the largest architectural/engineering firms in the world. There he gained experience working on international projects, learning to meet unusual criteria for a variety of clientele. After earning his certification in plumbing design, in a joint effort with a co-worker, he decided to start helping other designers in Houston prepare for the CPD exam. He has been teaching this course for roughly 18 years now and has expanded to the Society level both in and outside the United States. Mr. Taylor became a full member of ASPE in 2004 and served as a delegate at the 2004 convention in Cleveland, Ohio, 2010 convention in Philadelphia, Pennsylvania, 2012 Convention in Charlotte, North Carolina, 2014 Convention in Chicago, Illinois, 2018 Convention in Atlanta, Geogria and 2022 Convention in Indianapolis, Indiana. He is currently serving on the board of directors of the Houston Chapter as chair for the Board of Governors. Mr. Taylor served as co-chair, then chair of the ASPE Houston Product Show, as past Houston Chapter president and is currently on the Society Education Committee. With a coordinated effort, along with the DFW ASPE chapter, started the OKC ASPE chapter and was an interim president for two years. Mr. Taylor is currently at CRB as a senior plumbing/fire protection designer. After nine years in Houston, he decided to move to Norman, Oklahoma for a slower pace of life and to start a family. Before moving back to the Houston area, he was in Oklahoma for five years. Mr. Taylor has been back with the Houston Chapter of ASPE since 2013. He and his wife Jean are blessed with one child, Savannah Jane Taylor.

Mr. Flack has earned his designations, among select thousands in the world, as a Certified Professional in Erosion & Sediment Controls (CPESC) as well as his designation as a Certified Erosion, Sediment and Storm Water Inspector (CESSWI), lending his experience and training to his customers to consult them in all their stormwater needs. He has also earned his status as a Qualified Compliance Inspector of Stormwater (QCIS) and as a Qualified Preparer of Storm Water Pollution Prevention Plans (QPSWPPP.) He also earned the Certified Erosion and Sediment Control Lead (CESCL), which is a 17.5-hour certificate program as required by Washington State for all construction stormwater management. He is a subject matter expert and lead instructor for StormwaterONE, which has established itself as the leader in stormwater management training and credentialing, the school’s mission is to provide their students with the most comprehensive and up to date training of individual stormwater permits, online or in-person.

Brad has been invited to speak in-person on storm water and erosion control issues in many locations, including California, Texas, Tennessee, Louisiana, Wyoming, Oregon, Colorado, Ohio and New Mexico, as well as internationally in Antigua, Guatemala, and in San Jose, Costa Rica. Furthermore, he has provided virtual online training for a wide variety of  organizations across the country, including the Army Corps of Engineers, Maryland Stadium Authority, and more.

Additionally, he served as president and administrative vice president for the South-Central Chapter of the International Erosion Control Association. Furthermore, he directed the IECA Region 1 Education Committee: Stormwater Management Track as co-chair, which encompasses North America, South America and Europe. Brad also sat as the Region 6 Chapter President for EnviroCert International (ECI) and was a member of the Policies and Procedures Committee for ECI. He has served as the Region 7 representative for the CPESC, Inc., group as well as the technical vice-chair for the Council. He has been an IECA Mentor and served as a TCEQ EnviroMentor.

Brad has been involved with Stormwater Quality Management since 2004 where he learned about permitting, turf establishment, erosion control and detention pond maintenance and has continued to be a student of the industry throughout his career. His attention to detail and depth of knowledge about structural control devices, vegetative stabilization and best management practices are a valuable asset to his clients and students.

His wife is his high school sweetheart, and they have been married for over 20 years and have three sons. Brad has also actively served at his church and has ventured on over a dozen mission trips, from drilling for water in rural villages in Honduras to assisting in hurricane recovery efforts in Puerto Rico. Brad was the Director of Hands and Feet Honduras/Puerto Rico, a 501(c)3 organization for over eight years.

Wade Burcham graduated from the University of Alabama in Birmingham. His 21 years of experience has been focused on natural stream stabilization, water resources engineering, stormwater management, municipal engineering and contract administration. This experience has facilitated a balanced viewpoint from perspectives obtained as a civil engineer, a municipal consultant and a developer’s representative. He enjoys learning sustainable and innovative design practices and applying those techniques in developing countries through his volunteer work with Engineering Ministries International and other faith-based mission efforts.