product
Retaining Wall Design and Slope Stabilization Techniques
On-DemandNovember 15, 2019Terry Mccleary
Speakers
Terry Mccleary
McCleary Engineering
McCleary Engineering specializes in geotechnical investigations and recommendations for foundation design, retaining walls, slope stability, embankments, pavement design and rehabilitation, subgrade treatments and other engineering services such as drainage studies. McCleary Engineering is Illinois Department of Transportation (IDOT) prequalified in general geotechnical services, subsurface explorations, structure geotechnical reports and construction inspection categories.
Mr. McCleary has nearly 19 years of construction and geotechnical engineering experience with IDOT. Six years were spent on the front lines of contract administration in construction as a resident engineer on bridge and roadway projects which included construction layout, material inspection and construction practice inspection. For the last 13 years at IDOT, Mr. McCleary was the District #3 geotechnical engineer, working with hands-on subsurface investigations; analysis, design, and inspection of geotechnical engineering projects; and on-the-spot problem solving. He has served on numerous statewide committees involving abutment design, piling, aggregate subgrade, subgrade stability, pavement under drains and pavement rehabilitation. He served on a nationwide Federal Highway Administration (FHWA) pooled fund study on deep soil mixing technology. In 2009, Mr. McCleary left IDOT to work full time at his company, McCleary Engineering. Mr. McCleary is a licensed professional engineer in the states of Illinois, Indiana, Iowa, Georgia, Montana, Michigan, Ohio, Oklahoma and Wisconsin. He is a member of the American Society of Civil Engineers, the National Society of Professional Engineers, the Deep Foundations Institute, the Pile Driving Contractors Association and the Illinois Association of Highway Engineers. He is currently serving on the NCHRP Committee for the research of bridge scour on gravel bed rivers.
Retaining Wall Design and Slope Stabilization Techniques Webinar Series
WebinarMay 20, 2020Bill Simpson
Speakers
Bill Simpson, P.E.
Geotechnical Structure Design Specialist at Gradelta EngineeringMr. Simpson founded Gradelta Engineering in 2020 with the intent to help clients better understand the combination of geotechnical and structural engineering that he has worked with for the past 20 years. He earned his B.S.C.E. and M.S.C.E. degrees from Georgia Institute of Technology. He currently provides engineering services to contractors and fellow engineers for earth structure pricing, along with the plans and calculations needed for construction. He frequently consults with clients regarding the optimal structure type and location on the construction site to minimize risk and maximize useable space. He also works in the education sector providing not just seminars such as this one, but also acting as a subject matter expert creating study guide and test prep content for the NCEES Professional Civil Engineer exam. Mr. Simpson has also worked with lawyers and insurance companies during forensic investigation and lawsuits surrounding retaining walls and slope failures. His hope is that through the instructional services that he currently provides, slopes will remain stable and retaining wall failure will be eliminated.
Retaining Walls and Lateral Earth Pressure
WebinarOctober 20, 2021Bill Simpson
Speakers
Bill Simpson, P.E.
Geotechnical Structure Design Specialist at Gradelta EngineeringMr. Simpson founded Gradelta Engineering in 2020 with the intent to help clients better understand the combination of geotechnical and structural engineering that he has worked with for the past 20 years. He earned his B.S.C.E. and M.S.C.E. degrees from Georgia Institute of Technology. He currently provides engineering services to contractors and fellow engineers for earth structure pricing, along with the plans and calculations needed for construction. He frequently consults with clients regarding the optimal structure type and location on the construction site to minimize risk and maximize useable space. He also works in the education sector providing not just seminars such as this one, but also acting as a subject matter expert creating study guide and test prep content for the NCEES Professional Civil Engineer exam. Mr. Simpson has also worked with lawyers and insurance companies during forensic investigation and lawsuits surrounding retaining walls and slope failures. His hope is that through the instructional services that he currently provides, slopes will remain stable and retaining wall failure will be eliminated.
Retaining Walls and Slope Stabilization
SeminarJuly 26, 2018Bill Simpson
Speakers
Bill Simpson, P.E.
Geotechnical Structure Design Specialist at Gradelta EngineeringMr. Simpson founded Gradelta Engineering in 2020 with the intent to help clients better understand the combination of geotechnical and structural engineering that he has worked with for the past 20 years. He earned his B.S.C.E. and M.S.C.E. degrees from Georgia Institute of Technology. He currently provides engineering services to contractors and fellow engineers for earth structure pricing, along with the plans and calculations needed for construction. He frequently consults with clients regarding the optimal structure type and location on the construction site to minimize risk and maximize useable space. He also works in the education sector providing not just seminars such as this one, but also acting as a subject matter expert creating study guide and test prep content for the NCEES Professional Civil Engineer exam. Mr. Simpson has also worked with lawyers and insurance companies during forensic investigation and lawsuits surrounding retaining walls and slope failures. His hope is that through the instructional services that he currently provides, slopes will remain stable and retaining wall failure will be eliminated.
Retaining Walls and Slope Stabilization
SeminarDecember 14, 2017Bill Simpson
Speakers
Bill Simpson, P.E.
Geotechnical Structure Design Specialist at Gradelta EngineeringMr. Simpson founded Gradelta Engineering in 2020 with the intent to help clients better understand the combination of geotechnical and structural engineering that he has worked with for the past 20 years. He earned his B.S.C.E. and M.S.C.E. degrees from Georgia Institute of Technology. He currently provides engineering services to contractors and fellow engineers for earth structure pricing, along with the plans and calculations needed for construction. He frequently consults with clients regarding the optimal structure type and location on the construction site to minimize risk and maximize useable space. He also works in the education sector providing not just seminars such as this one, but also acting as a subject matter expert creating study guide and test prep content for the NCEES Professional Civil Engineer exam. Mr. Simpson has also worked with lawyers and insurance companies during forensic investigation and lawsuits surrounding retaining walls and slope failures. His hope is that through the instructional services that he currently provides, slopes will remain stable and retaining wall failure will be eliminated.
Retaining Walls in Residential and Light Commercial Development
WebinarJune 24, 2021Christopher Copeland
Speakers
Christopher Copeland
CEO & Managing Partner, Copeland Engineering, LLC, B.S. degree in Civil Engineering from the University of Texas at Austin
Mr. Copeland received his Bachelor of Science degree in Civil Engineering from the University of Texas at Austin in 1995. Mr. Copeland has been involved in more than 250,000 residential projects and is the CEO and Managing Partner of Copeland Engineering, LLC. During his 20 years in the engineering field, he has worked for large national volume builders, small builders, remodeling contractors, developers and high end custom builders. Through this process he has become an expert in homeowner and residential structural behavior on expansive clays in Austin, Dallas, Houston, Waco / Temple / Killeen and the San Antonio areas. Working with such volume he also became an expert at the repair process for foundations and has been through the builder warranty, insurance warranty, mediation and arbitration processes. There is no doubt that the industry of foundation design on expansive clay comes with risk and Mr. Copeland has experienced and come out successful on many lawsuit claims, audits and even the engineering complaint process. Additionally, as the industry has grown Mr. Copeland has grown with it and is also an expert in wood framing design, main wind force resisting system design, components and cladding design and going even further to have successfully completed two audits from the State of Texas via the Texas Department of Insurance. Mr. Copeland is a member of American Society of Civil Engineers, Texas Department of Insurance Windstorm Certified, American Concrete Institute and many other professional organizations.
Reviewing and Editing Documents
WebinarJanuary 9, 2020Dr. Mark Decker
Speakers
Dr. Mark Decker, PhD
Professor and Department Chair in the Commonwealth University of Pennsylvania’s English DepartmentDr. Decker teaches in support of Commonwealth University’s Professional Writing minor. He is Professor and Chair of the Department of Languages, Literatures, and Writing at Commonwealth. Dr. Decker has PhD and MA degrees in English from The Pennsylvania State University (2001, 1997) and he graduated summa cum laude in English from Utah State University (1995).
While an undergraduate, Dr. Decker worked for several years as a staff writer for Aerotech News and Review, an aerospace and defense industry trade newspaper published in Lancaster, California. During graduate school, Dr. Decker was a member of the Leonhard Center for Technical Writing Initiative, a collaboration between Penn State’s Department of English and College of Engineering designed to promote an exchange of ideas between technical writing instructors and the scientific and engineering communities. Dr. Decker also taught Business Writing, Technical Writing, and an Advanced Technical Writing course that enrolled graduate students from technical and scientific disciplines.
After graduate school, Dr. Decker spent four years at the University of Wisconsin-Stout, where he taught Technical Writing in support of that school’s major in Technical Communication and served as the advisor for the student chapter of the Society for Technical Communication. Dr. Decker has given presentations at several national and international conferences and has published both a book and a co-edited book as well as several scholarly articles, book chapters, and encyclopedia chapters.
Reviewing Hydraulic and Mechanical Properties of Soils
WebinarFebruary 25, 2020Dr. Lommler
Speakers
Dr. Lommler
Wood Environment and InfrastructurePrincipal Geotechnical Engineer with Wood Environment and Infrastructure
Dr. Lommler is a registered professional engineer in New Mexico and principal geotechnical engineer with Wood Environment and Infrastructure. He is a life member of the American Society of Civil Engineers, and he is a board-certified geotechnical engineer in the ASCE Geo-Institute. Dr. Lommler is a consultant, educator and author with over 45 years of civil, structural and geotechnical experience. His specialty is geotechnical problem solving.
Reviewing the Owner’s Commitment to Water Conservation and Applicable Codes and Standards
WebinarApril 23, 2020Chris Maxwell-gaines
Speakers
Chris Maxwell-gaines
Innovative Water Solutions, LLC, Austin
Mr. Maxwell-Gaines received a B.S. degree in Civil Engineering specializing in water and wastewater from Texas A&M University in College Station. After college, he and his wife joined the U.S. Peace Corps and accepted volunteer positions in Suriname, South America. They were assigned to the remote village of Godo Olo which is located in the Amazon rainforest, deep in the interior of Suriname. They helped the village implement a water well project, provided after-school tutoring, and provided business training for the villagers. They spent 27 months serving in the Peace Corps. After returning to Austin in 2002, Mr. Maxwell-Gaines worked at a civil engineering firm that provided a breadth of project experience ranging from TMDL computer modeling projects for impaired streams in Texas, to subdivision design, to water and wastewater treatment plant design. He became a licensed engineer in 2007. In 2004, Mr. Maxwell-Gaines started Innovative Water Solutions LLC. IWS is a design/build water conservation company that focuses on the nexus of stormwater management and water conservation. The company designs and installs rainwater/stormwater collection systems, stormwater management systems including green infrastructure, and graywater reuse systems, as well as efficient irrigation systems and water conservative landscaping for residential and commercial projects. To date, IWS has installed over 8,000,000 gallons of rainwater storage capacity across the state of Texas. Mr. Maxwell-Gaines has designed water conservation systems and green infrastructure projects for numerous institutions including: Texas A&M University; The University of Texas at Austin; City of Austin; Texas Department of Transportation; Texas Parks and Wildlife; numerous Independent School Districts (Austin, Dripping Springs, Wimberley Hays CISD); Atmos Energy; CubeSmart; Denton County, Texas; City of New Braunfels; San Jacinto River Authority; and SeaWorld.
Revising and Editing Documents
WebinarAugust 15, 2019Dr. Mark Decker
Speakers
Dr. Mark Decker, PhD
Professor and Department Chair in the Commonwealth University of Pennsylvania’s English DepartmentDr. Decker teaches in support of Commonwealth University’s Professional Writing minor. He is Professor and Chair of the Department of Languages, Literatures, and Writing at Commonwealth. Dr. Decker has PhD and MA degrees in English from The Pennsylvania State University (2001, 1997) and he graduated summa cum laude in English from Utah State University (1995).
While an undergraduate, Dr. Decker worked for several years as a staff writer for Aerotech News and Review, an aerospace and defense industry trade newspaper published in Lancaster, California. During graduate school, Dr. Decker was a member of the Leonhard Center for Technical Writing Initiative, a collaboration between Penn State’s Department of English and College of Engineering designed to promote an exchange of ideas between technical writing instructors and the scientific and engineering communities. Dr. Decker also taught Business Writing, Technical Writing, and an Advanced Technical Writing course that enrolled graduate students from technical and scientific disciplines.
After graduate school, Dr. Decker spent four years at the University of Wisconsin-Stout, where he taught Technical Writing in support of that school’s major in Technical Communication and served as the advisor for the student chapter of the Society for Technical Communication. Dr. Decker has given presentations at several national and international conferences and has published both a book and a co-edited book as well as several scholarly articles, book chapters, and encyclopedia chapters.
Revising and Editing Documents
WebinarAugust 10, 2017Dr. Mark Decker
Speakers
Dr. Mark Decker, PhD
Professor and Department Chair in the Commonwealth University of Pennsylvania’s English DepartmentDr. Decker teaches in support of Commonwealth University’s Professional Writing minor. He is Professor and Chair of the Department of Languages, Literatures, and Writing at Commonwealth. Dr. Decker has PhD and MA degrees in English from The Pennsylvania State University (2001, 1997) and he graduated summa cum laude in English from Utah State University (1995).
While an undergraduate, Dr. Decker worked for several years as a staff writer for Aerotech News and Review, an aerospace and defense industry trade newspaper published in Lancaster, California. During graduate school, Dr. Decker was a member of the Leonhard Center for Technical Writing Initiative, a collaboration between Penn State’s Department of English and College of Engineering designed to promote an exchange of ideas between technical writing instructors and the scientific and engineering communities. Dr. Decker also taught Business Writing, Technical Writing, and an Advanced Technical Writing course that enrolled graduate students from technical and scientific disciplines.
After graduate school, Dr. Decker spent four years at the University of Wisconsin-Stout, where he taught Technical Writing in support of that school’s major in Technical Communication and served as the advisor for the student chapter of the Society for Technical Communication. Dr. Decker has given presentations at several national and international conferences and has published both a book and a co-edited book as well as several scholarly articles, book chapters, and encyclopedia chapters.
Revising and Editing Documents
WebinarAugust 10, 2018Dr. Mark Decker
Speakers
Dr. Mark Decker, PhD
Professor and Department Chair in the Commonwealth University of Pennsylvania’s English DepartmentDr. Decker teaches in support of Commonwealth University’s Professional Writing minor. He is Professor and Chair of the Department of Languages, Literatures, and Writing at Commonwealth. Dr. Decker has PhD and MA degrees in English from The Pennsylvania State University (2001, 1997) and he graduated summa cum laude in English from Utah State University (1995).
While an undergraduate, Dr. Decker worked for several years as a staff writer for Aerotech News and Review, an aerospace and defense industry trade newspaper published in Lancaster, California. During graduate school, Dr. Decker was a member of the Leonhard Center for Technical Writing Initiative, a collaboration between Penn State’s Department of English and College of Engineering designed to promote an exchange of ideas between technical writing instructors and the scientific and engineering communities. Dr. Decker also taught Business Writing, Technical Writing, and an Advanced Technical Writing course that enrolled graduate students from technical and scientific disciplines.
After graduate school, Dr. Decker spent four years at the University of Wisconsin-Stout, where he taught Technical Writing in support of that school’s major in Technical Communication and served as the advisor for the student chapter of the Society for Technical Communication. Dr. Decker has given presentations at several national and international conferences and has published both a book and a co-edited book as well as several scholarly articles, book chapters, and encyclopedia chapters.
Revising and Editing Documents
WebinarJanuary 10, 2018Dr. Mark Decker
Speakers
Dr. Mark Decker, PhD
Professor and Department Chair in the Commonwealth University of Pennsylvania’s English DepartmentDr. Decker teaches in support of Commonwealth University’s Professional Writing minor. He is Professor and Chair of the Department of Languages, Literatures, and Writing at Commonwealth. Dr. Decker has PhD and MA degrees in English from The Pennsylvania State University (2001, 1997) and he graduated summa cum laude in English from Utah State University (1995).
While an undergraduate, Dr. Decker worked for several years as a staff writer for Aerotech News and Review, an aerospace and defense industry trade newspaper published in Lancaster, California. During graduate school, Dr. Decker was a member of the Leonhard Center for Technical Writing Initiative, a collaboration between Penn State’s Department of English and College of Engineering designed to promote an exchange of ideas between technical writing instructors and the scientific and engineering communities. Dr. Decker also taught Business Writing, Technical Writing, and an Advanced Technical Writing course that enrolled graduate students from technical and scientific disciplines.
After graduate school, Dr. Decker spent four years at the University of Wisconsin-Stout, where he taught Technical Writing in support of that school’s major in Technical Communication and served as the advisor for the student chapter of the Society for Technical Communication. Dr. Decker has given presentations at several national and international conferences and has published both a book and a co-edited book as well as several scholarly articles, book chapters, and encyclopedia chapters.
Revising and Editing Documents
WebinarAugust 17, 2016Dr. Mark Decker
Speakers
Dr. Mark Decker, PhD
Professor and Department Chair in the Commonwealth University of Pennsylvania’s English DepartmentDr. Decker teaches in support of Commonwealth University’s Professional Writing minor. He is Professor and Chair of the Department of Languages, Literatures, and Writing at Commonwealth. Dr. Decker has PhD and MA degrees in English from The Pennsylvania State University (2001, 1997) and he graduated summa cum laude in English from Utah State University (1995).
While an undergraduate, Dr. Decker worked for several years as a staff writer for Aerotech News and Review, an aerospace and defense industry trade newspaper published in Lancaster, California. During graduate school, Dr. Decker was a member of the Leonhard Center for Technical Writing Initiative, a collaboration between Penn State’s Department of English and College of Engineering designed to promote an exchange of ideas between technical writing instructors and the scientific and engineering communities. Dr. Decker also taught Business Writing, Technical Writing, and an Advanced Technical Writing course that enrolled graduate students from technical and scientific disciplines.
After graduate school, Dr. Decker spent four years at the University of Wisconsin-Stout, where he taught Technical Writing in support of that school’s major in Technical Communication and served as the advisor for the student chapter of the Society for Technical Communication. Dr. Decker has given presentations at several national and international conferences and has published both a book and a co-edited book as well as several scholarly articles, book chapters, and encyclopedia chapters.
Revising and Editing Documents
WebinarJanuary 15, 2019Dr. Mark Decker
Speakers
Dr. Mark Decker, PhD
Professor and Department Chair in the Commonwealth University of Pennsylvania’s English DepartmentDr. Decker teaches in support of Commonwealth University’s Professional Writing minor. He is Professor and Chair of the Department of Languages, Literatures, and Writing at Commonwealth. Dr. Decker has PhD and MA degrees in English from The Pennsylvania State University (2001, 1997) and he graduated summa cum laude in English from Utah State University (1995).
While an undergraduate, Dr. Decker worked for several years as a staff writer for Aerotech News and Review, an aerospace and defense industry trade newspaper published in Lancaster, California. During graduate school, Dr. Decker was a member of the Leonhard Center for Technical Writing Initiative, a collaboration between Penn State’s Department of English and College of Engineering designed to promote an exchange of ideas between technical writing instructors and the scientific and engineering communities. Dr. Decker also taught Business Writing, Technical Writing, and an Advanced Technical Writing course that enrolled graduate students from technical and scientific disciplines.
After graduate school, Dr. Decker spent four years at the University of Wisconsin-Stout, where he taught Technical Writing in support of that school’s major in Technical Communication and served as the advisor for the student chapter of the Society for Technical Communication. Dr. Decker has given presentations at several national and international conferences and has published both a book and a co-edited book as well as several scholarly articles, book chapters, and encyclopedia chapters.
Revit Basics of Building Modeling Seminar
SeminarNovember 22, 2019Natalie Niemann
Speakers
Natalie Niemann
Registered Architect
Ms. Niemann is an Associate Professor of Construction Technology – Architectural Technology in the Engineering Science & Industrial Technology Department at Suffolk County Community College. She received her Master of Architecture degree from State University of New York, Buffalo, and her Bachelor of Science degree in Architectural Technology from New York Institute of Technology. Ms. Niemann is also president of Niemann Architecture, P.C. She has been a licensed/registered architect since January 2007 which is the same month that she became a full-time faculty member at SCCC. In September 2012, Ms. Niemann founded Niemann Architecture, P.C. and has continued to practice in her profession while maintaining her position at the college. Most of her current professional work is residential and is located on the north and south forks of Long Island.
Revit Basics of Building Modeling Seminar
On-DemandSeptember 14, 2017Richard Sanford
Speakers
Richard Sanford
Dauntless Design CollaborativeOwner, Dauntless Design CollaborativeMr. Sanford is the owner of Dauntless Design Collaborative, a full-service Architecture and Building Information Modeling (BIM) consulting firm. He has over 15 years of experience in the field of architecture, with project experience in residential, commercial, hospitality, and institutional building types. He is a Licensed Architect in Pennsylvania and New Jersey and is an Autodesk Revit 2015 Certified Professional. Mr. Sanford earned his Bachelor of Architecture degree from Philadelphia University.