Introduction to the World of BIM and the Revit Basics Seminar

    Introduction to the World of BIM and the Revit Basics Seminar

    SeminarFebruary 25, 2019
    Mark Gibbons

    Speakers

    Mark Gibbons

    Principal/BIM Director at Precision Design Group, LLC in Farmington, UT

    Over the past twenty-five years, Mr. Gibbons has gained vast experience in architecture through designing, developing construction documents, construction administration and working with clients, consultants & contractors through all aspects of a project’s life cycle. He has worked on projects big and small, and has gained experience in small business ownership through developing his own consulting business in both architectural and technological services, specifically in BIM and Revit. Mr. Gibbons has been in project management for over fifteen years, and this experience provides him with crucial input regarding BIM-related development and procedures. As a BIM manager, he works with company leadership to provide support, training, and assistance for staff, consultants and clients to maximize the development of all projects. Mr. Gibbons has consulted and led BIM/Revit efforts of various architecture and engineering firms throughout Michigan, Ohio, California, and Utah. He has a bachelor’s degree in architecture from the University of Michigan where he went on to initiate and teach the Revit and BIM classes for both students and faculty there. His experience gives him a rounded approach to the best practices in assisting firms work with their clients while also helping projects reach their fullest potential. Personally, every chance he gets, you’ll find Mark working on a home improvement project, helping a friend build their house, or out in his workshop building.


    Introduction to the World of BIM and the Revit Basics Seminar

    Introduction to the World of BIM and the Revit Basics Seminar

    SeminarApril 25, 2019
    Mark Gibbons

    Speakers

    Mark Gibbons

    Principal/BIM Director at Precision Design Group, LLC in Farmington, UT

    Over the past twenty-five years, Mr. Gibbons has gained vast experience in architecture through designing, developing construction documents, construction administration and working with clients, consultants & contractors through all aspects of a project’s life cycle. He has worked on projects big and small, and has gained experience in small business ownership through developing his own consulting business in both architectural and technological services, specifically in BIM and Revit. Mr. Gibbons has been in project management for over fifteen years, and this experience provides him with crucial input regarding BIM-related development and procedures. As a BIM manager, he works with company leadership to provide support, training, and assistance for staff, consultants and clients to maximize the development of all projects. Mr. Gibbons has consulted and led BIM/Revit efforts of various architecture and engineering firms throughout Michigan, Ohio, California, and Utah. He has a bachelor’s degree in architecture from the University of Michigan where he went on to initiate and teach the Revit and BIM classes for both students and faculty there. His experience gives him a rounded approach to the best practices in assisting firms work with their clients while also helping projects reach their fullest potential. Personally, every chance he gets, you’ll find Mark working on a home improvement project, helping a friend build their house, or out in his workshop building.


    Introduction to the World of BIM and the Revit Basics Webinar Series

    Introduction to the World of BIM and the Revit Basics Webinar Series

    SeminarJanuary 29, 2020
    Mark Gibbons

    Speakers

    Mark Gibbons

    Principal/BIM Director at Precision Design Group, LLC in Farmington, UT

    Over the past twenty-five years, Mr. Gibbons has gained vast experience in architecture through designing, developing construction documents, construction administration and working with clients, consultants & contractors through all aspects of a project’s life cycle. He has worked on projects big and small, and has gained experience in small business ownership through developing his own consulting business in both architectural and technological services, specifically in BIM and Revit. Mr. Gibbons has been in project management for over fifteen years, and this experience provides him with crucial input regarding BIM-related development and procedures. As a BIM manager, he works with company leadership to provide support, training, and assistance for staff, consultants and clients to maximize the development of all projects. Mr. Gibbons has consulted and led BIM/Revit efforts of various architecture and engineering firms throughout Michigan, Ohio, California, and Utah. He has a bachelor’s degree in architecture from the University of Michigan where he went on to initiate and teach the Revit and BIM classes for both students and faculty there. His experience gives him a rounded approach to the best practices in assisting firms work with their clients while also helping projects reach their fullest potential. Personally, every chance he gets, you’ll find Mark working on a home improvement project, helping a friend build their house, or out in his workshop building.


    Introduction to Vibrations

    Introduction to Vibrations

    SeminarAugust 16, 2017
    Brian Davis

    Speakers

    Brian Davis

    Mr. Davis has over 27 years of cross-functional experience in aircraft propulsion systems/engines, failure analysis, manufacturing processes, fatigue and fracture mechanics, composite materials, and stress analysis. He has 23 years of experience in OEM gas turbine design and propulsion systems, as well as four years of experience in OEM medical device design with a specialization in ultrasonics. Mr. Davis holds a number of different patents and has experience with FAA certification and FDA 510(k) approval. He qualified as a US Naval Engineering duty officer (reserve) with rank of lieutenant. Mr. Davis received his BS degree in Mechanical Engineering from the University of Florida and his MS degree in Mechanical Engineering from the University of Cincinnati. He is a licensed professional engineer in Ohio and Florida.


    Introduction to Vibrations

    Introduction to Vibrations

    On-DemandMarch 21, 2017
    Brian Davis

    Speakers

    Brian Davis

    Mr. Davis has over 27 years of cross-functional experience in aircraft propulsion systems/engines, failure analysis, manufacturing processes, fatigue and fracture mechanics, composite materials, and stress analysis. He has 23 years of experience in OEM gas turbine design and propulsion systems, as well as four years of experience in OEM medical device design with a specialization in ultrasonics. Mr. Davis holds a number of different patents and has experience with FAA certification and FDA 510(k) approval. He qualified as a US Naval Engineering duty officer (reserve) with rank of lieutenant. Mr. Davis received his BS degree in Mechanical Engineering from the University of Florida and his MS degree in Mechanical Engineering from the University of Cincinnati. He is a licensed professional engineer in Ohio and Florida.


    Introduction to Vibrations

    Introduction to Vibrations

    WebinarJune 14, 2018
    Brian Davis

    Speakers

    Brian Davis

    Mr. Davis has over 27 years of cross-functional experience in aircraft propulsion systems/engines, failure analysis, manufacturing processes, fatigue and fracture mechanics, composite materials, and stress analysis. He has 23 years of experience in OEM gas turbine design and propulsion systems, as well as four years of experience in OEM medical device design with a specialization in ultrasonics. Mr. Davis holds a number of different patents and has experience with FAA certification and FDA 510(k) approval. He qualified as a US Naval Engineering duty officer (reserve) with rank of lieutenant. Mr. Davis received his BS degree in Mechanical Engineering from the University of Florida and his MS degree in Mechanical Engineering from the University of Cincinnati. He is a licensed professional engineer in Ohio and Florida.


    Introduction to Vibrations

    Introduction to Vibrations

    SeminarJune 14, 2018
    Brian Davis

    Speakers

    Brian Davis

    Mr. Davis has over 27 years of cross-functional experience in aircraft propulsion systems/engines, failure analysis, manufacturing processes, fatigue and fracture mechanics, composite materials, and stress analysis. He has 23 years of experience in OEM gas turbine design and propulsion systems, as well as four years of experience in OEM medical device design with a specialization in ultrasonics. Mr. Davis holds a number of different patents and has experience with FAA certification and FDA 510(k) approval. He qualified as a US Naval Engineering duty officer (reserve) with rank of lieutenant. Mr. Davis received his BS degree in Mechanical Engineering from the University of Florida and his MS degree in Mechanical Engineering from the University of Cincinnati. He is a licensed professional engineer in Ohio and Florida.


    Iowa Engineering Law

    Iowa Engineering Law

    On-DemandMarch 14, 2017
    Bradley Beaman + 3 Other Speakers

    Speakers

    Bradley Beaman

    Bradshaw, Fowler, Proctor & Fairgrave, P.C.

    Shareholder, Bradshaw, Fowler, Proctor & Fairgrave, P.C.Mr. Beaman’s practice focuses on litigation, insurance defense, construction law and the representation of businesses. He is a member of the American Bar Association’s Sections on Labor and Employment Law and Litigation, and the American Bar Association’s Forum Committee on the Construction Industry. Mr. Beaman is a member of the Defense Research Institute Committees on Construction Law, Employment Law and Trial Tactics; the Iowa Defense Counsel Association Committee on Employment Law; and the Iowa State Bar Association Sections on Construction Law, Labor and Employment Law, and Litigation. He earned his J.D. degree, with high honors, from Drake University Law School.

    Kevin Caster

    Shuttleworth & Ingersoll, P.L.C.

    Attorney, Senior Vice President at Shuttleworth & Ingersoll
    Mr. Caster’s law practice focuses on commercial litigation, and particularly on construction litigation. Many construction suits involve both claims about professional negligence and claims about the breach of construction contracts. Mr. Caster has written and spoken extensively on many construction law issues, including construction contract law, AIA contracts, implied warranties in construction contracts, economic loss doctrine, the standard of care for design professionals, and construction accidents. He is the author of the Iowa chapter of State-by-State Guide to Architect, Engineer and Contractor Licensing, second edition. He is an allied individual member of the American Institute of Architects and a member of the Cedar Rapids Home Builders Association.

    John Goodhue

    Goodhue, Coleman, & Owens, P.C.

    Goodhue, Coleman, & Owens, P.C.Mr. Goodhue is a U.S. registered patent attorney with extensive experience in intellectual property including software, semiconductors, medical devices, vehicle-control systems, wired and wireless communications, electrical safety devices, consumer devices, agricultural implements, health information technology, 3D printers, wearable devices, electronic commerce, mobile devices, and other areas. Mr. Goodhue co-authored the American Bar Association (ABA) published book, Persuasive Computer Presentations: The Essential Guide for Lawyers. The book was a success and the ABA published a second edition. He has also authored the book, Dare To Invent: The Inventor’s How-To Guide to Inventing, Protecting, and Monetizing Inventions, and he has co-authored the book, Dare To Innovate: The Corporate Innovator’s Guide to Patents. Mr. Goodhue received a degree in Computer Engineering from Rose-Hulman Institute of Technology and continued his studies in the graduate school at Iowa State University. Prior to law school Mr. Goodhue was a principal in two different start-ups. He received his law degree from Drake University Law School.

    Timothy Lillwitz

    Bradshaw, Fowler, Proctor & Fairgrave, P.C.

    Shareholder, Bradshaw, Fowler, Proctor & Fairgrave, P.C.Mr. Lillwitz joined the litigation division of the firm in 2006 after serving as a law clerk for Bradshaw in 2005. He has first and second-chaired jury and bench trials in both state and federal courts in Iowa, and he has handled a wide variety of civil and business litigation matters from pre-lawsuit until resolution. He is a member of the American Bar Association, the Defense Research Institute, the Iowa Defense Counsel Association, the Iowa State Bar Association, and the Polk County Bar Association. Mr. Lillwitz has previously lectured for HalfMoon Education on issues related to business entities. He earned his J.D. degree from Drake University Law School.


    Iowa Engineering Law and Ethics

    Iowa Engineering Law and Ethics

    WebinarJune 22, 2020
    Mark R. Becker + 5 Other Speakers

    Speakers

    Mark R. Becker

    Shareholder in the construction group of Fabyanske, Westra, Hart & Thomson, P.A., in Minneapolis

    Over a 25-year career, Mr. Becker has represented international engineering firms, architects, design-builders, owners, construction managers, and specialty subcontractors on major horizontal infrastructure projects such as roads, bridges, tunnels, and pipelines, and vertical infrastructure projects such as stadiums, convention centers, hospitals, and dams. He has also worked on industrial projects including process plants, power plants, grain elevators, and commercial and residential projects. He is a Fellow of the American College of Construction Lawyers, a former chair of the Construction Section of the Minnesota State Bar Association, a director of the Associated General Contractors of Minnesota, and a frequent speaker on construction law topics. Mr. Becker is nationally recognized as a leading advocate in the field of early resolution of complex construction disputes through mediation, many times without the need for a lawsuit for formal legal proceedings. He earned his undergraduate degree in Civil Engineering from Northwestern University, cum laude, Tau Beta Pi, and his law degree from the University of Iowa with high distinction.

    Kevin Caster

    Shuttleworth & Ingersoll, P.L.C.

    Attorney, Senior Vice President at Shuttleworth & Ingersoll
    Mr. Caster’s law practice focuses on commercial litigation, and particularly on construction litigation. Many construction suits involve both claims about professional negligence and claims about the breach of construction contracts. Mr. Caster has written and spoken extensively on many construction law issues, including construction contract law, AIA contracts, implied warranties in construction contracts, economic loss doctrine, the standard of care for design professionals, and construction accidents. He is the author of the Iowa chapter of State-by-State Guide to Architect, Engineer and Contractor Licensing, second edition. He is an allied individual member of the American Institute of Architects and a member of the Cedar Rapids Home Builders Association.

    Colin Hendricks

    Brown Winick

    Attorney at Brown Winick
    Mr. Hendricks is an attorney with Brown Winick in Des Moines. As an attorney, he takes pride in listening, understanding is clients’ objectives, and providing practical legal advice in an easy-to-understand format. Mr. Hendricks talks straight and educates clients about what he’s doing, why he’s doing it, and how it accomplishes their goals. His background in estate planning, tax, and business formation/succession allows him to help clients navigate the tax, legal, and practical aspects of owning and operating businesses from formation to sale. Originally from Fort Dodge, Iowa, Mr. Hendricks stayed in-state to earn his economics and law school degrees from the University of Iowa.

    Michael Kaufmann

    Simmons Perrine Moyer Bergman

    Attorney at Simmons Perrine Moyer Bergman
    Mr. Kaufmann is a litigation attorney with a general practice encompassing business and commercial litigation, construction and design, insurance defense, and labor and employment litigation. He has experience assisting clients with a variety of issues, including construction defect and mechanic’s lien litigation, trade secrets and business torts, contract disputes, federal civil rights litigation, and insurance coverage disputes. As a current member of the Construction Law Section Council of the Iowa State Bar Association, Mr. Kaufmann stays abreast of legal issues facing Iowa’s construction industry.

    John Lande

    Dickinson Law

    Attorney and Shareholder at Dickinson Law
    Mr. Lande is a shareholder at the Dickinson Law Firm in Des Moines, Iowa, and chair of the firm’s Cybersecurity, Data Breach, and Privacy section. His cybersecurity practice involves advising clients on pre-incident controls and policies, post-incident response, litigation and litigation risk, insurance coverage disputes, and regulatory response. Mr. Lande is a certified information privacy professional (CIPP/US) by the International Association of Privacy Professionals (IAPP), and he has been recognized by Best Lawyers in America and Chambers USA in 2019. Mr. Lande is a frequent presenter on cybersecurity and actively contributes to Dickinson Law’s cybersecurity blog.

    Andrea Rastelli

    Dickinson Law

    Attorney at Dickinson Law
    Ms. Rastelli is an associate at the Dickinson Law Firm in Des Moines. Her practice specializes in providing solutions for startups and emerging companies, as well as established businesses and financial institutions, including cybersecurity, intellectual property, secured transactions, privacy and corporate governance. She has experience working in financial services on legal issues surrounding data privacy, intellectual property, and secured transactions.


    Iowa Medicaid and Medicare Planning Update

    Iowa Medicaid and Medicare Planning Update

    On-DemandNovember 17, 2020
    Abigail Hillers + 2 Other Speakers

    Speakers

    Abigail Hillers

    Bradshaw Fowler Proctor & Fairgrave

    Abigail Hillers Attorney at Bradshaw Fowler Proctor & Fairgrave
    Ms. Hillers is an associate attorney working in Bradshaw Law Firm’s wills, trusts, estate planning and probate law practice area. She practiced law in Indiana before moving to Iowa in 2010. Prior to joining the Bradshaw Law Firm, Ms. Hillers worked as a wealth management and trust officer and general counsel for a local bank. She is a graduate of Valparaiso University Law School and is a member of the Iowa State Bar Association Elder Law Section Council.

    Greg Kenyon

    Bradshaw Fowler Proctor & Fairgrave

    Greg Kenyon Attorney and Shareholder at Bradshaw Fowler Proctor & Fairgrave
    Mr. Kenyon is an attorney and shareholder at Bradshaw Law Firm specializing in elder law and wills, trusts, estate planning and probate law. A graduate of Drake University Law School, Mr. Kenyon has been a frequent speaker for multiple decades in the areas of estates, trusts, elder law, Medicaid and long term care planning. He is a member of Buena Vista University’s President’s Advisory Council and has held leadership/member roles at many other organizations in Iowa. Mr. Kenyon is a member of the American Bar Association, Iowa State Bar Association, Lincoln Inne of Court, National Academy of Elder Law Attorneys, Polk County Bar Association, and The American College of Trust and Estate Council

    Cynthia Letsch, Founder and Managing Attorney

    Letsch Law Firm

    Cynthia Letsch Founder and Managing Attorney at Letsch Law Firm
    Ms. Letsch is an Iowa native who obtained her undergraduate degree at Southern Methodist University in Dallas, Texas and her J.D. degree from Drake University Law School in 1995, graduating from both universities with honors. She holds a certificate in Corporate Governance from Tulane University Law School. Her legal career includes private practice, teaching and course design at the university level, and serving as corporate counsel. Ms. Letsch’s current office opened in 2013, and the practice is limited to elder law, estate planning, and probate/trust administration. She is a frequent speaker on topics of Medicaid for the Elderly; Medicaid Financial Risk Management for Care Facilities, and fiduciary responsibilities of agents under powers of attorney, guardians, conservators, and trustees. Admitted to practice in Iowa, Nebraska, Missouri, and the Federal Southern District of Iowa, she is a member of the Iowa Bar Association Probate and Trust Section and Elder Law Section; the Dallas County Bar Association; Elder Counsel; NAELA; and the Missouri Bar Association.


    Iowa Personal Injury Practice

    Iowa Personal Injury Practice

    On-DemandApril 28, 2017
    Michael Carmoney + 2 Other Speakers

    Speakers

    Michael Carmoney

    Carmoney Law Firm, PLLC

    Attorney with the Carmoney Law Firm, PLLC in Des MoinesMr. Carmoney is a trial attorney specializing in civil litigation and insurance defense. He is a veteran of numerous civil jury and bench trials in Iowa’s state and federal courts, primarily representing individual and corporate defendants in personal injury disputes. The scope of his practice ranges across many phases of civil litigation and appeals, including premises liability claims, motor vehicle accidents, fire and explosion cases, intentional torts, and employment law matters. Mr. Carmoney is an honors graduate of Wittenberg University and Drake University Law School, and he successfully completed the International Association of Defense Counsel Trial Academy at Stanford University. In 2016, he was appointed Honorary Counsel by the Iowa/Nebraska Chapter of the International Association of Special Investigative Units, an organization committed to the reduction of insurance fraud. Mr. Carmoney has co-authored two legal textbooks: Bad Faith Litigation in Iowa (published 2003) and Practical Legal Ethics in Iowa: Issues and Answers (published 2002).

    Jack Leverenz

    Carmoney Law Firm, PLLC

    Attorney with the Carmoney Law Firm, PLLCMr. Leverenz served as a law clerk in the Carmoney law offices until he was hired on as an attorney after successfully graduating from law school. Mr. Leverenz has worked in the legal field in both Iowa and Minnesota, and he currently practices law in the federal and state courts of Iowa. His practice spreads across a spectrum of civil litigation and appeals, and includes family law, personal injury and property damage litigation, workers’ compensation defense, construction defect claims, products liability, motor vehicle accidents, intentional torts, business litigation, contract construction and disputes, and employment issues. Mr. Leverenz is a graduate of the University of Iowa, and he received his J.D. degree with honors from Drake University Law School. He is a member of the Iowa State Bar Association, the Polk County Bar Association, and the Iowa-Nebraska Chapter of the International Association of Special Investigative Units.

    Nicholas Mauro

    Crawford & Mauro Law Firm

    Attorney with Crawford & Mauro Law Firm in Des MoinesMr. Mauro graduated from the University of Iowa with a B.A. degree in Business Administration in 1999 and received his law degree from the University of Iowa College of Law in 2002. His practice focuses on plaintiff’s personal injury, medical malpractice, racing and gaming, sports law, and commercial litigation, as well as government relations and policy initiatives. Mr. Mauro is a member of the American Bar Association, the Iowa State Bar Association, the Polk County Bar Association, the American Association for Justice and the Iowa Trial Lawyers Association. He is also active in the Des Moines community serving as a volunteer coach for the South Des Moines Irish Baseball Club and as the former president and a board member for the Southwestern Hills Neighborhood Association.


    IPC Chapters 11-15: Storm, Piping, Non-Potable Systems, Irrigation and Appendices

    IPC Chapters 11-15: Storm, Piping, Non-Potable Systems, Irrigation and Appendices

    WebinarJune 26, 2020
    Jared Agee

    Speakers

    Jared Agee, MCP CBO

    Division Director of Building and Code Enforcement for St. Charles County, Missouri

    Mr. Agee is the director of Building and Code Enforcement for St. Charles County, Missouri. Previously, he worked in urban and suburban municipal governments managing building code enforcement, facilities, and information technology. Prior to his public sector positions, Mr. Agee worked in the construction industry in design and project management.

    He has an undergraduate degree in Architectural and Mechanical Design and a graduate degree in Public Administration and Policy Analysis. As a Master Code Professional, Mr. Agee is one of approximately 800 people to obtain the highest level of certification from the International Code Council. He currently holds a total of 28 certifications in building, energy, plumbing, mechanical, electrical, and accessibility areas.

    Mr. Agee is a former president of the Missouri Association of Building Officials and Inspectors (MABOI). In addition, he founded Regimen Consulting LLC, which provides code training and technology consultation to various organizations across the country.


    IPC Chapters 2-5: Definitions, Regulations, Fixtures and Water Heaters

    IPC Chapters 2-5: Definitions, Regulations, Fixtures and Water Heaters

    WebinarJune 25, 2020
    Jared Agee

    Speakers

    Jared Agee, MCP CBO

    Division Director of Building and Code Enforcement for St. Charles County, Missouri

    Mr. Agee is the director of Building and Code Enforcement for St. Charles County, Missouri. Previously, he worked in urban and suburban municipal governments managing building code enforcement, facilities, and information technology. Prior to his public sector positions, Mr. Agee worked in the construction industry in design and project management.

    He has an undergraduate degree in Architectural and Mechanical Design and a graduate degree in Public Administration and Policy Analysis. As a Master Code Professional, Mr. Agee is one of approximately 800 people to obtain the highest level of certification from the International Code Council. He currently holds a total of 28 certifications in building, energy, plumbing, mechanical, electrical, and accessibility areas.

    Mr. Agee is a former president of the Missouri Association of Building Officials and Inspectors (MABOI). In addition, he founded Regimen Consulting LLC, which provides code training and technology consultation to various organizations across the country.


    IPC Chapters 6-10: Water, Sanitary Drainage, Indirect Waste, Vents and Stacks

    IPC Chapters 6-10: Water, Sanitary Drainage, Indirect Waste, Vents and Stacks

    WebinarJune 26, 2020
    Jared Agee

    Speakers

    Jared Agee, MCP CBO

    Division Director of Building and Code Enforcement for St. Charles County, Missouri

    Mr. Agee is the director of Building and Code Enforcement for St. Charles County, Missouri. Previously, he worked in urban and suburban municipal governments managing building code enforcement, facilities, and information technology. Prior to his public sector positions, Mr. Agee worked in the construction industry in design and project management.

    He has an undergraduate degree in Architectural and Mechanical Design and a graduate degree in Public Administration and Policy Analysis. As a Master Code Professional, Mr. Agee is one of approximately 800 people to obtain the highest level of certification from the International Code Council. He currently holds a total of 28 certifications in building, energy, plumbing, mechanical, electrical, and accessibility areas.

    Mr. Agee is a former president of the Missouri Association of Building Officials and Inspectors (MABOI). In addition, he founded Regimen Consulting LLC, which provides code training and technology consultation to various organizations across the country.


    IRAs and Retirement/Estate Planning

    WebinarDecember 10, 2021
    Russell A. Willis III J.D. LL.M.

    Speakers

    Russell A. Willis III J.D. LL.M.

    Mr. Willis is a tax lawyer, freelance writer, and consultant and advisor to lawyers, on issues related to wealth transfers. He has written numerous articles for publications serving tax and charitable gift planning professionals, and he is a frequent conference and seminar speaker throughout the country.

    Three years ago, he launched a newsletter, the Jack Straw Fortnightly, analyzing current developments in the law – both tax and nontax – concerning the transfer of private wealth in this country.

    Mr. Willis chaired the Steering Committee of the Probate and Trust Law Section of his local bar association and served on a legislative drafting subcommittee for the Probate and Trust Law Committee of the State Bar. He has also written numerous articles for law journals and publications.

    Mr. Willis has a law degree from St. Louis University and a master’s degree in Taxation Law from Washington University in St. Louis. His undergraduate degree in English Literature is from Indiana University, Bloomington, and he has a master’s degree in English from the University of Chicago.


    IRC Building Planning and Shell Construction, Part I

    IRC Building Planning and Shell Construction, Part I

    WebinarMarch 12, 2020
    Edward L. Fronapfel

    Speakers

    Edward L. Fronapfel, MSCE, PE, CBIE, CFCC, Fellow NAFE

    President, 7272 Consulting

    Mr. Fronapfel has a Bachelor of Science in Civil Engineering and a Master of Science in Civil Engineering with an emphasis in structural and forensic engineering. Ed’s a Certified Level 2 Infrared Thermographer, Certified 3rd Party EIFS Inspector, Certified Forensic Claims Consultant, Board Certified Building Inspection Engineer, and Certified Building Commissioning Professional. He is a registered engineer in the States of AL, AR, AZ, CO, FL, GA, ID, IN, IA, KS, LA, MA, MD, MI, MN, MS, MT, MO, NC, ND, NE, NJ, NM, NV, NY, OH, OK, OR, PA, SC, SD, TN, TX, UT, VA, WA, WV, and WY. Mr. Fronapfel has been deposed nearly 800 times and admitted into trial settings over 125 times. He has been used as an expert in arbitration and mediations over 500 times since the late 1990s. Mr. Fronapfel is an instructor for the Colorado School of Mines, Golden, Colorado, the College of Contract Management, U.K., Diploma in Structural Forensic Engineering, and he has been an adjunct professor for the Burns School of Real Estate Management, University of Denver, since 2007. Mr. Fronapfel is a Board-Certified Member of the Association of Building Inspection Professionals, a Certified Forensic Claims Consultant through AACE, a Board-Certified member of the International Board of Forensic Engineering and Science and a Member of The Academy of Experts, U.K., and a Fellow Member of ASCE and of NAFE.


    IRC Building Planning and Shell Construction, Part II

    IRC Building Planning and Shell Construction, Part II

    WebinarMarch 13, 2020
    Edward L. Fronapfel

    Speakers

    Edward L. Fronapfel, MSCE, PE, CBIE, CFCC, Fellow NAFE

    President, 7272 Consulting

    Mr. Fronapfel has a Bachelor of Science in Civil Engineering and a Master of Science in Civil Engineering with an emphasis in structural and forensic engineering. Ed’s a Certified Level 2 Infrared Thermographer, Certified 3rd Party EIFS Inspector, Certified Forensic Claims Consultant, Board Certified Building Inspection Engineer, and Certified Building Commissioning Professional. He is a registered engineer in the States of AL, AR, AZ, CO, FL, GA, ID, IN, IA, KS, LA, MA, MD, MI, MN, MS, MT, MO, NC, ND, NE, NJ, NM, NV, NY, OH, OK, OR, PA, SC, SD, TN, TX, UT, VA, WA, WV, and WY. Mr. Fronapfel has been deposed nearly 800 times and admitted into trial settings over 125 times. He has been used as an expert in arbitration and mediations over 500 times since the late 1990s. Mr. Fronapfel is an instructor for the Colorado School of Mines, Golden, Colorado, the College of Contract Management, U.K., Diploma in Structural Forensic Engineering, and he has been an adjunct professor for the Burns School of Real Estate Management, University of Denver, since 2007. Mr. Fronapfel is a Board-Certified Member of the Association of Building Inspection Professionals, a Certified Forensic Claims Consultant through AACE, a Board-Certified member of the International Board of Forensic Engineering and Science and a Member of The Academy of Experts, U.K., and a Fellow Member of ASCE and of NAFE.


    IRC Energy Efficiency and Building Systems

    IRC Energy Efficiency and Building Systems

    WebinarMarch 13, 2020
    Edward L. Fronapfel

    Speakers

    Edward L. Fronapfel, MSCE, PE, CBIE, CFCC, Fellow NAFE

    President, 7272 Consulting

    Mr. Fronapfel has a Bachelor of Science in Civil Engineering and a Master of Science in Civil Engineering with an emphasis in structural and forensic engineering. Ed’s a Certified Level 2 Infrared Thermographer, Certified 3rd Party EIFS Inspector, Certified Forensic Claims Consultant, Board Certified Building Inspection Engineer, and Certified Building Commissioning Professional. He is a registered engineer in the States of AL, AR, AZ, CO, FL, GA, ID, IN, IA, KS, LA, MA, MD, MI, MN, MS, MT, MO, NC, ND, NE, NJ, NM, NV, NY, OH, OK, OR, PA, SC, SD, TN, TX, UT, VA, WA, WV, and WY. Mr. Fronapfel has been deposed nearly 800 times and admitted into trial settings over 125 times. He has been used as an expert in arbitration and mediations over 500 times since the late 1990s. Mr. Fronapfel is an instructor for the Colorado School of Mines, Golden, Colorado, the College of Contract Management, U.K., Diploma in Structural Forensic Engineering, and he has been an adjunct professor for the Burns School of Real Estate Management, University of Denver, since 2007. Mr. Fronapfel is a Board-Certified Member of the Association of Building Inspection Professionals, a Certified Forensic Claims Consultant through AACE, a Board-Certified member of the International Board of Forensic Engineering and Science and a Member of The Academy of Experts, U.K., and a Fellow Member of ASCE and of NAFE.


    IRC Significant Changes – Chapters 1-10

    IRC Significant Changes – Chapters 1-10

    WebinarJanuary 13, 2022
    Jared Agee

    Speakers

    Jared Agee, MCP CBO

    Division Director of Building and Code Enforcement for St. Charles County, Missouri

    Mr. Agee is the director of Building and Code Enforcement for St. Charles County, Missouri. Previously, he worked in urban and suburban municipal governments managing building code enforcement, facilities, and information technology. Prior to his public sector positions, Mr. Agee worked in the construction industry in design and project management.

    He has an undergraduate degree in Architectural and Mechanical Design and a graduate degree in Public Administration and Policy Analysis. As a Master Code Professional, Mr. Agee is one of approximately 800 people to obtain the highest level of certification from the International Code Council. He currently holds a total of 28 certifications in building, energy, plumbing, mechanical, electrical, and accessibility areas.

    Mr. Agee is a former president of the Missouri Association of Building Officials and Inspectors (MABOI). In addition, he founded Regimen Consulting LLC, which provides code training and technology consultation to various organizations across the country.


    IRC Significant Changes – Chapters 1-10

    IRC Significant Changes – Chapters 1-10

    WebinarNovember 5, 2021
    Jared Agee

    Speakers

    Jared Agee, MCP CBO

    Division Director of Building and Code Enforcement for St. Charles County, Missouri

    Mr. Agee is the director of Building and Code Enforcement for St. Charles County, Missouri. Previously, he worked in urban and suburban municipal governments managing building code enforcement, facilities, and information technology. Prior to his public sector positions, Mr. Agee worked in the construction industry in design and project management.

    He has an undergraduate degree in Architectural and Mechanical Design and a graduate degree in Public Administration and Policy Analysis. As a Master Code Professional, Mr. Agee is one of approximately 800 people to obtain the highest level of certification from the International Code Council. He currently holds a total of 28 certifications in building, energy, plumbing, mechanical, electrical, and accessibility areas.

    Mr. Agee is a former president of the Missouri Association of Building Officials and Inspectors (MABOI). In addition, he founded Regimen Consulting LLC, which provides code training and technology consultation to various organizations across the country.