product

Ms. Paist-Goldman has more than 25 years of experience in water resource engineering with a particular focus in stream and wetland restoration and mitigation design. She is the principal and owner of Rippled Waters Engineering, LLC based in New Jersey. Her firm specializes in water resources engineering services for a variety of projects. She is an experienced hydrologic and hydraulic modeler and has worked extensively on design and analysis using a variety of hydrologic and hydraulic programs including HEC-HMS, HEC-RAS, and HydroCAD. Ms. Paist-Goldman’s design expertise includes wetland restoration and mitigation; stream restoration; bridge repair and replacement; and dam repair, replacement, and removal. Specifically related to riverine systems, Ms. Paist-Goldman has extensive expertise with stream restoration, large woody debris, natural channel design and bioengineering stabilization techniques. Ms. Paist-Goldman has designed restoration projects of all sizes ranging from a few hundred feet to several miles of stream. These projects are planned for use as mitigation banks or serve as mitigation for development onsite. Working closely with restoration ecologists and landscape architects, Ms. Paist-Goldman has designed a variety of stream and wetland habitats including creation, enhancement, restoration, and preservation with a focus on sustainability and regulatory compliance.

Ms. Paist-Goldman has more than 25 years of experience in water resource engineering with a particular focus in stream and wetland restoration and mitigation design. She is the principal and owner of Rippled Waters Engineering, LLC based in New Jersey. Her firm specializes in water resources engineering services for a variety of projects. She is an experienced hydrologic and hydraulic modeler and has worked extensively on design and analysis using a variety of hydrologic and hydraulic programs including HEC-HMS, HEC-RAS, and HydroCAD. Ms. Paist-Goldman’s design expertise includes wetland restoration and mitigation; stream restoration; bridge repair and replacement; and dam repair, replacement, and removal. Specifically related to riverine systems, Ms. Paist-Goldman has extensive expertise with stream restoration, large woody debris, natural channel design and bioengineering stabilization techniques. Ms. Paist-Goldman has designed restoration projects of all sizes ranging from a few hundred feet to several miles of stream. These projects are planned for use as mitigation banks or serve as mitigation for development onsite. Working closely with restoration ecologists and landscape architects, Ms. Paist-Goldman has designed a variety of stream and wetland habitats including creation, enhancement, restoration, and preservation with a focus on sustainability and regulatory compliance.

Ms. Paist-Goldman has more than 25 years of experience in water resource engineering with a particular focus in stream and wetland restoration and mitigation design. She is the principal and owner of Rippled Waters Engineering, LLC based in New Jersey. Her firm specializes in water resources engineering services for a variety of projects. She is an experienced hydrologic and hydraulic modeler and has worked extensively on design and analysis using a variety of hydrologic and hydraulic programs including HEC-HMS, HEC-RAS, and HydroCAD. Ms. Paist-Goldman’s design expertise includes wetland restoration and mitigation; stream restoration; bridge repair and replacement; and dam repair, replacement, and removal. Specifically related to riverine systems, Ms. Paist-Goldman has extensive expertise with stream restoration, large woody debris, natural channel design and bioengineering stabilization techniques. Ms. Paist-Goldman has designed restoration projects of all sizes ranging from a few hundred feet to several miles of stream. These projects are planned for use as mitigation banks or serve as mitigation for development onsite. Working closely with restoration ecologists and landscape architects, Ms. Paist-Goldman has designed a variety of stream and wetland habitats including creation, enhancement, restoration, and preservation with a focus on sustainability and regulatory compliance.

Ms. Paist-Goldman has more than 25 years of experience in water resource engineering with a particular focus in stream and wetland restoration and mitigation design. She is the principal and owner of Rippled Waters Engineering, LLC based in New Jersey. Her firm specializes in water resources engineering services for a variety of projects. She is an experienced hydrologic and hydraulic modeler and has worked extensively on design and analysis using a variety of hydrologic and hydraulic programs including HEC-HMS, HEC-RAS, and HydroCAD. Ms. Paist-Goldman’s design expertise includes wetland restoration and mitigation; stream restoration; bridge repair and replacement; and dam repair, replacement, and removal. Specifically related to riverine systems, Ms. Paist-Goldman has extensive expertise with stream restoration, large woody debris, natural channel design and bioengineering stabilization techniques. Ms. Paist-Goldman has designed restoration projects of all sizes ranging from a few hundred feet to several miles of stream. These projects are planned for use as mitigation banks or serve as mitigation for development onsite. Working closely with restoration ecologists and landscape architects, Ms. Paist-Goldman has designed a variety of stream and wetland habitats including creation, enhancement, restoration, and preservation with a focus on sustainability and regulatory compliance.

Dr. Gregory H. Nail is a professor in the Engineering Department at the University of Tennessee at Martin where he teaches a variety of courses including fluid mechanics, hydraulics and hydrology, and hydraulic and hydrologic modeling. He holds a professional engineer’s license based on having passed both the Civil and Mechanical discipline-specific exams. Prior to coming to UT-Martin in 2002, he worked as a research hydraulic engineer for the United States Army Corp of Engineers for 11 years. He continues to be professionally active by working summer internships, carrying on consulting work, supervising senior design projects, and regularly delivering continuation programs, all oriented around computational hydraulic and computational hydrologic modeling. Dr. Nail earned his B.M.E. degree from Auburn University and his M.S. and Ph.D. degrees from Texas A&M University.

Mr. Jones, P.E., is president of Hartech Engineering, which was founded in 2007 as a multi-discipline civil engineering consulting firm providing infrastructure, development, and municipal design services for the public and private sectors. Bringing over 30 years of engineering expertise along with specific state-of-the-art, computer-aided technology to achieve efficient, cost saving design solutions, he also provides hydrology and hydraulic studies and reports along with general civil engineering support for prime consultants to PennDOT or local municipality projects. Mr. Jones is a licensed pilot and studied Military Civil Engineering while serving in the U.S. Air Force and continues his master’s education locally through Penn State. He is also a registered professional engineer in the states of Pennsylvania, Maryland, Arizona, and Georgia.

Dr. Gregory H. Nail is a professor in the Engineering Department at the University of Tennessee at Martin where he teaches a variety of courses including fluid mechanics, hydraulics and hydrology, and hydraulic and hydrologic modeling. He holds a professional engineer’s license based on having passed both the Civil and Mechanical discipline-specific exams. Prior to coming to UT-Martin in 2002, he worked as a research hydraulic engineer for the United States Army Corp of Engineers for 11 years. He continues to be professionally active by working summer internships, carrying on consulting work, supervising senior design projects, and regularly delivering continuation programs, all oriented around computational hydraulic and computational hydrologic modeling. Dr. Nail earned his B.M.E. degree from Auburn University and his M.S. and Ph.D. degrees from Texas A&M University.

Chris Naidu has more than 10 years of experience in drainage and flood control projects throughout New Mexico. His experience includes preparation of drainage management plans (DMP), hydrologic analysis, hydraulic analysis of flood control structures, sediment transport, and scour analysis for unlined arroyos and bridge structures. Using modeling/analysis software, Mr. Naidu produces high quality hydrologic and hydraulic models. He has a proven record of preparing easy-to-understand reports and corresponding maps and figures. He has prepared hydrographs and analyzed storm drains, weirs, pump stations, and detention/surge ponds. Additional skills include preparation of plan specifications, bidding and construction plans, cost estimates, and bidding services. He is familiar with Arc Geographic Information System (ArcGIS); Hydrologic Engineering Center (HEC) Hydrologic Modeling System, HEC Geospatial Hydrologic Modeling Extension (geoHMS0), HEC River Analysis System(HEC-RAS), US Environmental Protection Agency Storm Water Management Model (EPA SWMM), StormCad, and CulvertMaster.

Mr. Jones, P.E., is president of Hartech Engineering, which was founded in 2007 as a multi-discipline civil engineering consulting firm providing infrastructure, development, and municipal design services for the public and private sectors. Bringing over 30 years of engineering expertise along with specific state-of-the-art, computer-aided technology to achieve efficient, cost saving design solutions, he also provides hydrology and hydraulic studies and reports along with general civil engineering support for prime consultants to PennDOT or local municipality projects. Mr. Jones is a licensed pilot and studied Military Civil Engineering while serving in the U.S. Air Force and continues his master’s education locally through Penn State. He is also a registered professional engineer in the states of Pennsylvania, Maryland, Arizona, and Georgia.

Dr. Gregory H. Nail is a professor in the Engineering Department at the University of Tennessee at Martin where he teaches a variety of courses including fluid mechanics, hydraulics and hydrology, and hydraulic and hydrologic modeling. He holds a professional engineer’s license based on having passed both the Civil and Mechanical discipline-specific exams. Prior to coming to UT-Martin in 2002, he worked as a research hydraulic engineer for the United States Army Corp of Engineers for 11 years. He continues to be professionally active by working summer internships, carrying on consulting work, supervising senior design projects, and regularly delivering continuation programs, all oriented around computational hydraulic and computational hydrologic modeling. Dr. Nail earned his B.M.E. degree from Auburn University and his M.S. and Ph.D. degrees from Texas A&M University.

Dr. Gregory H. Nail is a professor in the Engineering Department at the University of Tennessee at Martin where he teaches a variety of courses including fluid mechanics, hydraulics and hydrology, and hydraulic and hydrologic modeling. He holds a professional engineer’s license based on having passed both the Civil and Mechanical discipline-specific exams. Prior to coming to UT-Martin in 2002, he worked as a research hydraulic engineer for the United States Army Corp of Engineers for 11 years. He continues to be professionally active by working summer internships, carrying on consulting work, supervising senior design projects, and regularly delivering continuation programs, all oriented around computational hydraulic and computational hydrologic modeling. Dr. Nail earned his B.M.E. degree from Auburn University and his M.S. and Ph.D. degrees from Texas A&M University.