Agenda

Registration:                        8:00 – 8:30 am

Morning Session:                8:30 am – 12:15 pm

Lunch (On your own):         12:15 – 1:15 pm

Afternoon Session:             1:15- 4:30 pm

Distinguishing between Construction Defects and Failures
A. Di Gioia

   Defining defects
      — Causes of defects: problems with design, materials and/or construction
   Defining failures
     — Causes of failures: deterioration, unintended use, “Acts of God”

Analyzing Defects and Failures for Methodology and Causality
M. Shanok

   The three phases of a building’s life – breaking in, broken in, and breaking down
   Site conditions and vulnerabilities
   Building design and construction
   Defects and failures in mechanical and electrical systems

The Impact of Design, Supervision, and Inspection on Safety During Construction
M. Shanok

   Worker safety during construction
   Occupant safety once the facility is occupied

Practices that Prevent Defects and Failures
M. Shanok

   Involving the owner in reviewing proposed use and preparing construction documents
   Complying with building codes standards and practices
   Choosing materials and construction techniques
   Dealing with sales reps
   Employing new materials and construction techniques
   Monitoring construction
   Discovering and correcting problems before project completion
   Educating the owner – building commissioning, operation and maintenance

Preventing and Resolving Disputes Generated by Defects and Failures
R. Garcia

   Identifying parties with potential liability
   Understanding theories of liability
   Identifying defenses to liability
      — Timeliness, contractual defenses, crossclaims and counterclaims
   Participating in conflict resolution procedures
      — Mediation, arbitration, litigation
   Reviewing types of damages and how they are calculated
   Insurance coverage issues

Credits

Professional Engineers
     6.5 Continuing Ed. Hours

Architects
     6.5 HSW Continuing Ed. Hours
     6.5 AIA HSW Learning Units

Contractors
     Non-Credit Continuing Ed.

Continuing Education Credit Information

This seminar is open to the public and offers 6.5 continuing education hours to professional engineers and 6.5 HSW continuing education hours to architects in all states, except Florida architects. Continuing education is not mandatory in Connecticut.

HalfMoon Education is deemed an approved continuing education sponsor for New York architects. HalfMoon Education is an approved continuing education sponsor for engineers in Florida, Indiana, Maryland, New Jersey (Approval No. 24GP00000700), New York (NYSED Sponsor No. 35), North Carolina, and North Dakota.

This seminar is approved by the American Institute of Architectsfor 6.5 HSW Learning Units (Sponsor No. J885). Only full attendance can be reported to the AIA/CES.

This course offers a non-credit continuing education opportunity to contractors. It has not been approved by any state contractor licensing entity for required continuing education credit.

Attendance will be monitored, and attendance certificateswill be available after the seminar for most individuals whocomplete the entire event. Attendance certificates not availableat the seminar will be mailed to participants within fifteen business days.

Speakers

Anita Di

Di Gioia Berger

Di Gioia Berger
Ms. Di Gioia focuses her practice on complex civil litigation and in particular within the construction industry, she represents owners, designers and contractors in all stages of their construction projects. She has experience negotiating and drafting construction contracts for all participants in the construction industry and also counsels her clients regarding effective risk management and insurance coverage. Ms. Di Gioia also handles construction claim resolution, whether through alternative dispute resolution or litigation. Ms. Di Gioia is a member of the Connecticut Bar Association and the New Haven County Inn of Court. She is admitted to practice in Connecticut, Louisiana and New York. She obtained her under graduate degree, magna cum laude, from Siena College, and her law degree, magna cum laude, from the Tulane University School of Law.

Raymond Garcia

Garcia & Milas

Principal of Garcia & Milas in New Haven, CTMr. Garcia is the founding principal of the firm. Since 2006 he has enjoyed the distinction of being named to the Connecticut Super Lawyers® list for Construction Litigation. He combines10 years of hands-on construction industry experience with more than 32 years of legal experience litigating complex commercial construction and franchise disputes. Mr. Garciahas tried 50 construction cases to conclusion before courts and juries. He has tried to conclusion over 30 franchise cases. He has conducted successful appeals before state and federal appellate courts. The cases span a wide range of subjects from public works contract claims for additional compensation to claims based on Connecticut unfair trade practices, including franchise and bad faith litigation, based on common law and statutory principles. The trials have been conducted before arbitration panels, juries or to the court sitting without a jury. Mr. Garcia attended John Marshall Law School in Chicago, Illinois. He served as an editor of the John Marshall Journal of Practice and Procedure, the school’s law review, for two years. In 1979, returning from Chicago to Connecticut, he joined Pullman, Comley, Bradley and Reeves in Bridgeport, Connecticut, as an associate. In 1981 he formed Garcia and Associates, P.C., forerunner of Garcia and Milas, P.C.

Michael Shanok

Forensic Engineering

Principal of Forensic Engineering in Cheshire, CTMr. Shanok is an electrical, mechanical and structural engineer. He is registered as a professional engineer in Connecticut and Massachusetts and has held temporary permits to practice engineering in more than half the states of the Union and three foreign countries. He graduated from the US Naval Academy in 1960 and after serving on active duty, gained experience, first as an employee and then as the principal of a design firm, in the operation, design, construction supervision and startup of more than 30 industrial facilities. He reorganized his business in 1982, to specialize in forensic engineering. Among catastrophes his firm has been engaged to investigate were the Derby River Restaurant explosion and fire in December 1985 and the L’Ambiance Plaza construction collapse in April 1987. Over the years, his firm has served more than 2,200 clients, including insurance companies, both plaintiff and defense law firms, and industrial companies.

CD/Manual Price: $289.00

Currently, our self-study products DO NOT qualify for AIA, LACES, ASLA or CLARB credit.

HalfMoon will mail you these materials via USPS. Please allow 5 weeks from the date of purchase to receive your product. If the live seminar is in the future, please allow 5 weeks from the date of the live seminar.

The CD/Manual package includes an audio recording of a live seminar on CDs, along with a bound copy of the manual that was distributed at the seminar. The manual contains written materials prepared by the seminar speaker(s).

The CDs contain embedded number codes, which you are required to document and return to HalfMoon if you wish to obtain a certificate of completion for the program. The acceptance of self-administered continuing education activities vary widely between states and professions. Before undertaking any self-study effort, you should review the rules of your licensing/certifying entity.

HalfMoon Education guarantees its products. The self-study products are recorded from a live seminar and there are circumstances where an audio recording is not available. HalfMoon will contact you and issue a full refund if the product you ordered is not available. If you are not happy with a product you receive, you can return the product for a full refund. However, refunds will not be issued if completion certificates are requested.

Learn More