New York Special Inspections under the IBC Chapter 17
DISCLAIMER
Before undertaking any on-demand effort, you should review the rules of your licensing/certifying entity.
It’s your responsibility to determine whether this on-demand course meets your continuing education requirements.
You must take and pass a quiz to receive credit. You can take the quiz as many times as needed and there is no time limit on the quiz.
Once the quiz is completed, you will be asked to download your certificate.
**Any on-demand programs that qualify for AIA or LACES credit will require an additional 2 business weeks for processing.
**AIA credit is not available in USB format.
Streamable MP4/PDF
You will receive an automated email letting you know when your On-Demand package is available approximately 3 business days after the date of the live event or the date of your order, whichever is later. This email will contain links to the video recording, materials, and program quiz.
To track your purchase, you will need to create an account on the website using the email address used for your registration.
For AIA requirements only, the on-demand recording will have occasional question prompts that will not allow the video to progress unless they are answered, and you will not be able to skip forward while watching the video.
Please note, if you attempt to resume watching the video on a separate device, your progress will not be saved.
Click the link which appears at the end of the video to be taken to the course quiz.
You will have unlimited access to the on-demand video recording, and it will never expire.
**Any streamable on-demand programs that qualify for AIA or LACES credit will require an additional 2 business weeks for processing.
USB MP4/PDF
HalfMoon will mail these materials via USPS.
USB orders ship approximately 3 business days after the program takes place or after the order is placed, whichever date is later. Please allow an additional 7-10 business days for shipping.
The link to the quiz will be available in a PDF in your USB drive marked QUIZ.
HalfMoon will contact you and issue a full refund if the product you ordered is not available. However, refunds will not be issued if completion certificates are requested.
Please contact HalfMoon Education if you have any questions during the process of taking this course. (715) 835-5900 or qchapman@halfmoonseminars.org
**Any USB on-demand programs that qualify for LACES credit will require an additional 2 business weeks for processing.
**AIA credit is not available in USB format.
Agenda
Webinar instructions will be emailed before the date of the webinar.
Please log into the webinar 15 – 30 minutes before the start time.
Thursday, April 11, 2024
8:30 – 4:30 pm EDT
Presented by: James A. D’Aloisio, P.E., LEED AP
Overview of Special Inspections
- Scope and timeline
- Statement of special inspections and testing
- Special inspector and testing agent qualifications, accreditation
- Contracts and conflicts of interest
- Pre-construction meeting
- Jobsite protocol
Soils and Foundation Inspection and Testing
- Soil inspection vs geotechnical consultant
- Existing soil conditions
- Deep foundations
Masonry Inspection and Testing
- Reinforced masonry pre-grout inspection
- Grouting inspection
- Grout testing, mortar prism testing
Concrete Inspection and Testing
- Preplacement inspection of forms and reinforcement
- Concrete sampling and testing
- Concrete inspection
- Post-placement inspection: curing, etc.
Steel Inspection and Testing
- Inspection of steel frames
- Connection details
- Shop fabrication
- Weld inspection and testing
- Bolt inspection and testing
- Pre-engineered metal buildings
Other Steel Inspections
- Steel decking
- Open-web steel joists
- Cold-formed steel framing
- Cold-formed steel trusses
Wood Construction
- Inspection of wood structural elements:
- Wood fasteners and connections
- Architectural wall panels
- Plate-connected wood trusses
Other Inspections
- Fire-resistant materials
- Exterior insulation and finish systems (EIFS)
- Smoke control
Seismic and Wind Resistance
- Seismic requirements
- Inspections, tests, observations
- Wind resistance – observations
Load Tests and Material and Test Standards
Discrepancies and Reports
- Reports and discrepancy list
- Resolving discrepancies
- Re inspections
- Final report
Webinar Instructions
All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.
Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.
Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.
GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)
Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled.
Internet connection: Minimum of 1Mbps Hardware: 2GB RAM or more
For more information, visit the Support section at www.gotowebinar.com
Credits
Professional Engineers
7.0 PDHs
Architects
7.0 HSW CE Hours
7.0 AIA LU|HSW
International Code Council
.7 CEUs (Building)
Continuing Education Credit Information
This webinar is open to the public and is designed to qualify for 7.0 PDHs for professional engineers and 7.0 HSW continuing education hours for licensed architects in New York and all states that allow this learning method. Please refer to specific state rules to determine eligibility.
HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.
The American Institute of Architects Continuing Education System has approved this course for 7.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.
The International Code Council has approved this event for .7 CEUs in the specialty area of Building (Preferred Provider No. 1232).
Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).
On-Demand Credits
The preceding credit information only applies to the live presentation. This course in an on-demand format may not be eligible for the same credits as the live presentation; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:
7.0 HSW LUs (AIA)
Speakers
James A. D’Aloisio , P.E. LEED AP
Principal with Klepper, Hahn & Hyatt in SyracuseMr. D’Aloisio is a principal with Klepper, Hahn & Hyatt, a structural engineering, landscape architecture, and building envelope services firm in East Syracuse, New York. A graduate of Rensselaer Polytechnic Institute and is a registered professional engineer in New York and Massachusetts. He is a member and past president (1997 – 1998) of the American Society of Civil Engineers (ASCE) Syracuse Section, and a member of the American Institute of Steel Construction (AISC), the American Concrete Institute (ACI), the National Society of Professional Engineers (NSPE), and the Structural Engineers Association of New York State (SEAoNY). Mr. D’Aloisio is a member of ASCE/SEI’s Frost-Protected Shallow Foundations Committee, the Structural Condition Assessment of Existing Buildings Committee, and the Sustainability Committee. Mr. D’Aloisio received the Order of the Engineer at Syracuse University in 1997. His 30-plus years’ experience as a consulting structural engineer has primarily involved the design of new building structures, additions, and modifications, and analyses, assessments, and investigations of structures and facades. Mr. D’Aloisio has performed structural condition reviews of over 15 million square feet of buildings and he has performed over 150 structural forensic investigations. He has presented over 300 times.
AIA Info
AIA Provider Statement:
HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).
This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.
AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
Course Title: New York Special Inspections under the IBC Chapter 17
Delivery Method: Live Online
Course Description: This course examines what materials and construction processes are subject to special inspections and testing under the International Building Code Chapter 17 as adopted in New York, including those for soils and foundations, masonry, concrete, steel, wood, fire-resistant materials, exterior insulation finishes, smoke control, and seismic and wind loads.
Learning Objectives:
Learning Objective 1:
Learners will be able to identify code compliance and testing requirements for soil conditions and foundations, masonry, and concrete.
Learning Objective 2:
Learners will be able to identify code compliance and testing requirements for steel frames, shop fabrication, bolts, connection details, welding, pre-engineered metal buildings, steel decking, cold-formed steel framing, open-weld steel joists, and cold-formed steel trusses.
Learning Objective 3:
Learners will be able to identify code compliance and testing requirements for wood construction, including fasteners and connections, architectural wall panels, and metal plate connected wood trusses.
Learning Objective 4:
Learners will be able to identify code compliance and testing requirements for fire-resistant materials, exterior insulation and finish systems, smoke control, and seismic and wind resistance.
LUs: 7.0 LU Type: LU|HSWs.
Prerequisites: Experience with building materials, construction, and code compliance
Advance Preparation: None
Program Level: Intermediate
Course Expiration Date: 02/14/2027
Complaint Resolution Policy:
Complaints regarding this course can be emailed to fchapman@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.