Agenda

Webinar instructions will be emailed before the date of the webinar.

Log into Webinar:            8:00 – 8:30 am MDT
Morning Session:             8:30 – 11:45 am MDT
Break:                                 11:45 am – 12:45 pm MDT
Afternoon Session:          12:30 – 4:30 pm MDT

 

Development and Enforcement of International Residential Code

History of the International Residential Code (IRC)
Adoption and enforcement of International Residential Code
Recent and anticipated Code amendments
Future of the Code

 

Building Planning and Shell Construction (Chapters 2-10)

Definitions
Alternative provisions and design criteria
Wind effects and protection of openings
Seismic provisions
Story height and live loads
Snow loads
Fire-resistant construction and exterior walls
Dwelling unit separations and garage separation
Ceiling heights
Glazing
Garages and carports
Ingress, egress and stairways
Fire and carbon monoxide safety and detection
Foam plastic
Wood and wood-based products
Accessibility
Floods, storms and drainage
Soils and foundations
Framing and fastening
Walls and wall covering
Roof/ceiling construction
Roof assemblies
Fireplaces and chimneys

 

Energy Efficiency (Chapter 11)Compliance

Building thermal envelope
Climate classifications
Permanent energy certificateInsulation and fenestration
Building systems
Lighting

 

Mechanical, Fuel, Plumbing and Electrical Systems

Appliance installation and exhaust systems
Ventilation
Hydronic systems
Fuel gas systems and appliances
Plumbing fixtures
Drains
Backflow preventers, venting, sumps and ejectors
Fire sprinkler systems
Electrical system grounding
Intersystem bonding termination
Overcurrent devices
Electrical outlets
Luminaires
Pools, spas and hot tubs

 

Webinar Instructions

All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.

Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.

Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.

GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)

Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled


Internet connection:
 Minimum of 1Mbps       Hardware: 2GB RAM or more

For more information, visit the Support section at www.gotowebinar.com

Credits

Professional Engineers
6.5 PDHs

Architects
6.5 HSW CE Hours

AIA
6.5 LU|HSW

International Code Council
.65 CEUs (Building)

 

Continuing Education Credit Information This webinar offers 6.5 PDHs to professional engineers and 6.5 HSW continuing education hours to architects in all states.

HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider No. 0004647), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700), North Carolina (S-0130), and North Dakota. HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.

The American Institute of Architects Continuing Education System has approved this course for 6.5 LU|HSW (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

The International Code Council has approved this event for .65 CEUs in the specialty area of Building (Preferred Provider No. 1232).

Completion certificates will be awarded to participants who complete this event and earn a passing score (80%) on the quiz that follows the presentation (multiple attempts allowed)

Speakers

Edward L. Fronapfel, MSCE, PE, CBIE, CFCC, Fellow NAFE

President, 7272 Consulting

Mr. Fronapfel has a Bachelor of Science in Civil Engineering and a Master of Science in Civil Engineering with an emphasis in structural and forensic engineering. Ed’s a Certified Level 2 Infrared Thermographer, Certified 3rd Party EIFS Inspector, Certified Forensic Claims Consultant, Board Certified Building Inspection Engineer, and Certified Building Commissioning Professional. He is a registered engineer in the States of AL, AR, AZ, CO, FL, GA, ID, IN, IA, KS, LA, MA, MD, MI, MN, MS, MT, MO, NC, ND, NE, NJ, NM, NV, NY, OH, OK, OR, PA, SC, SD, TN, TX, UT, VA, WA, WV, and WY. Mr. Fronapfel has been deposed nearly 800 times and admitted into trial settings over 125 times. He has been used as an expert in arbitration and mediations over 500 times since the late 1990s. Mr. Fronapfel is an instructor for the Colorado School of Mines, Golden, Colorado, the College of Contract Management, U.K., Diploma in Structural Forensic Engineering, and he has been an adjunct professor for the Burns School of Real Estate Management, University of Denver, since 2007. Mr. Fronapfel is a Board-Certified Member of the Association of Building Inspection Professionals, a Certified Forensic Claims Consultant through AACE, a Board-Certified member of the International Board of Forensic Engineering and Science and a Member of The Academy of Experts, U.K., and a Fellow Member of ASCE and of NAFE.

AIA Info

AIA Provider Statement:

HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).

This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.

AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.

Course Title: International Residential Code 2018

Delivery Method: Live Online

Course Description: This is a 6.5 hour live lecture presentation with the instructors and students together in the same room. It will be conducted in a handicap-accessible conference room with ample seating space and writing surface for all attendees. Bound written materials, authored by the faculty, will be distributed to all participants at the program. Attendance will be monitored and reported to AIA/CES. This course covers the development and enforcement of the International Residential Code, building planning and shell construction, and energy efficiency, and mechanical, fuel, plumbing and electrical systems.

Learning Objectives:

Learning Objective 1:
Learners will be able to reference and comply with IRC provisions for residential shell design and construction for ingress, egress, stairways, emergency egress and rescue openings, fire and carbon monoxide safety and detection, walls, roof assemblies, and foundations

Learning Objective 2:
Learners will be able to reference and comply with IRC provisions for residential mechanical, fuel, plumbing and electrical systems, including appliance installation and exhaust systems, ventilation, fuel gas systems, plumbing fixtures, backflow preventers, fire sprinkler systems, electrical grounding, and electrical outlets.

Learning Objective 3:
Learners will be able to reference and comply with IRC provisions for residential shell design and construction for wind effects, seismic activity, snow loads, live loads, and floods, storms and drainage.

Learning Objective 4:
Learners will be able to reference and comply with IRC provisions for residential energy efficiency, including insulation and fenestration, the thermal envelope, and lighting.

LUs: 6.5                                                                                              LU Type: LU|HSWs.

Prerequisites: Familiarity with residential construction

Advance Preparation: None

Program Level: Intermediate

Course Expiration Date: 03/14/2021

Complaint Resolution Policy:

Complaints regarding this course can be emailed to doug@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.