Agenda

Webinar instructions will be emailed before the date of the webinar.

Please log into the webinar 15 – 30 minutes before the start time.

Thursday, May 9, 2024
9:00 am – 4:30 pm CDT

 

Presented by: Scott Jeffers, PhD, PE

Fundamental Concepts of Hydrology and Hydraulics

  • The water cycle
  • Defining the water budget
  • Design storms vs historic rain events
  • Natural vs urban landscapes
  • Natural channels and engineered drainage systems
  • Hydraulic control structures
  • Challenges and trends in municipal stormwater management

Basic Stormwater Calculations: Case Study Demonstration

  • Conceptual design – designing a bioretention basin for a small site
  • Total volume – how much water do we have to manage? Using curve number
  • Storage volume – how big does our basin need to be?
  • Peak flow rate – what is the maximum flow rate of water we will expect our system to manage? Using the rational method
  • Pipe sizing – what size will our hydraulic components need to be to manage the peak flow? Using Manning’s Equation.
  • Putting it together – taking the engineering parameters into physical site design
  • Software options to streamline the approach

Introduction to Hydrologic/Hydraulic Modeling

  • Hydrologic/hydraulic modeling demonstration
  • TR-20 vs SWMM demonstration
  • Implementation of GIS
  • Evaluating design storms vs continuous rainfall patterns
  • Key elements in reporting and forming a design

Design and Municipal Considerations

  • Stormwater management plan permitting
  • Pros and cons of various systems
  • Low impact development/green stormwater infrastructure
  • Design elements and choosing the right system

Advanced Modeling Techniques

  • 1D vs 2D modeling
  • City-wide master planning with hydrologic/hydraulic modeling
  • Telling a story with modeling
  • Where information can be obtained

   

Webinar Instructions

All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.

Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.

Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.

GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)

Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled.

Internet connection: Minimum of 1Mbps       Hardware: 2GB RAM or more

For more information, visit the Support section at www.gotowebinar.com

Credits

Professional Engineers
6.0 PDHs

Architects
6.0 HSW CE Hours
6.0 AIA LU|HSW

Landscape Architects
6.0 HSW CE Hours
6.0 LA CES HSW PDHs

 

Continuing Education Credit Information

This webinar is open to the public and is designed to qualify for 6.0 PDHs for professional engineers, 6.0 HSW continuing education hours for licensed architects, and 6.0 HSW continuing education hours for landscape architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.

The American Institute of Architects Continuing Education System has approved this course for 6.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

The Landscape Architecture Continuing Education System has approved this course for 6.0 HSW PDHs. Only full participation is reportable to the LA CES.

Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

On-Demand Credits

The preceding credit information only applies to the live presentation. This course in an on-demand format is not pre-approved by any licensing boards and may not qualify for the same credits; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:

6.0 HSW LUs (AIA)
6.0 HSW PDHs (LA CES)

Speakers

Scott Jeffers, PE, PhD

Water Resource Engineer

Dr. Scott Jeffers’s career focuses on urban water resources and green infrastructure collaborating with major municipalities internationally to address modern challenges in water, wastewater, and stormwater systems. Dr. Jeffers brings over 12 years’ experience in the water resource industry specializing in site and regional hydraulic/hydrologic modeling, permitting, capital improvement master planning, optimization/prioritization for asset management, IoT deployment, and a background in novel digital water techniques. Dr. Jeffers is a leading expert in EPA SWMM modeling and teaches hydrology and urban ecohydraulics at Drexel University. Recreationally, he is a musician and rock climber.

AIA Info

AIA Provider Statement:

HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).

This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.

AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.

Course Title: Hydrology and Hydraulics for Municipal Stormwater Engineering

Delivery Method: Live Online

Course Description: This six-hour course focuses on the science, principles and modeling of stormwater with the goal of designing an efficient municipal stormwater management system. The course will cover the fundamental concepts of hydrology and hydraulics, demonstrate basic stormwater calculations, provide an introduction to hydraulic modeling, discuss design and municipal considerations, and explore advanced stormwater modeling techniques.

Learning Objectives:

Learning Objective 1:
Learners will be able to describe the water cycle, explain the difference between design storms and historic rain events, examine hydraulic control structures, and discuss challenges and trends in municipal stormwater management.

Learning Objective 2:
Learners will be able to calculate total water volume, required storage volume, peak flow rate, and piping size to create a conceptual design.

Learning Objective 3:
Learners will be able to observe a hydrologic/hydraulic modeling demonstration, compare TR-20 to SWMM, and discuss the implementation of GIS into modeling software.

Learning Objective 4:
Learners will be able to determine where pertinent information for constructing models can be obtained, compare 1D versus 2D modeling, and discuss the pros and cons of various systems.

LUs: 6.0                                                                                              LU Type: LU|HSWs.

Prerequisites: Familiarity with stormwater issues

Advance Preparation: None

Program Level: Intermediate

Course Expiration Date: 03/06/2027

Complaint Resolution Policy:

Complaints regarding this course can be emailed to fchapman@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.

Streamable MP4/PDF Price: $329.00