Agenda

Webinar instructions will be emailed before the date of the webinar.

Please log into the webinar 15 – 30 minutes before start time.

Log into Webinar
8:30 – 9:00 am PST
Morning Session
9:00 am – 11:45 am PST
Break
11:45 am – 12:45 pm PST
Afternoon Session
12:45 – 3:30 pm PST

 

Presented by
Glenn Dea, AIA, ADAC, CASp

Complying with Federal and State Accessibility Requirements
Jurisdiction and enforcement
• History and development of the California Building Code
• Development of the Americans with Disabilities Act Standards for Accessible Design
• Relationship between ADA federal requirements, state requirements, and building codes
• Entities and facilities that are covered
Scoping requirements
• Readily-achievable barrier removal
• Alterations and path of travel
• New construction
• Safe harbors
Building blocks and accessible routes
• Accessible routes
• Ramps
• Entrances and doors
Fire alarm systems/means of egress
• Areas of refuge/exterior areas for assisted rescue
• Platform lifts
• Elevators
• Tactile exit signs
• Stairs
• Stair handrails
• Assembly areas
• Ramped aisles/stepped aisles
Stairway identification signs

Meeting Standards in the California Building Code and ADA
Pedestrian facilities in public rights-of-way
• Sidewalks
• Pedestrian street crossings/crosswalks
• Roundabouts
• Driveway crossings
• At-grade rail crossings
• Curb ramps and blended transitions
• Detectable warnings
• Pedestrian signals/pedestrian push buttons (PBB’s)
• On-street parking spaces
• Passenger drop-off and loading zones and bus stops
Site Accessibility
• On-site parking facilities and electrical vehicle charging stations
• Accessible trash enclosures
• Directional and informational signs
• Recreational facilities
• Play areas
• Outdoor developed areas
• Shared use paths and class I bikeways
Building Accessibility
• Drinking fountains
• Toilet facilities
• Showers
• Signage standards
• Accessible kitchen facilities
• Assembly areas
• Assistive listening systems
Reviewing new materials/technologies and anticipated developments in codes/standards

 

 Webinar Instructions

Each webinar session earns continuing education credit and can be registered for individually. All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.

Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.

Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.

GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)

Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled


Internet connection:
 Minimum of 1Mbps       Hardware: 2GB RAM or more

For more information, visit the Support section at www.gotowebinar.com

Credits

Professional Engineers
5.0 PDHs

Architects
5.0 HSW CE Hours
(Fulfills mandatory 5.0 hour accessibility requirement)

AIA      (AIA credits only available for attending live Webinar or Seminar)
5.0 LU|HSW

International Code Council
.5 CEUs (Accessibility)

Certified Planners
CM | 5.0

Interior Designers
5.0 CE Hours

 

Continuing Education Credit Information
This webinar offers a 5.0 hour continuing education opportunity to California professional engineers and interior designers, and a 5.0 hour continuing education opportunity to California architects, which fulfills the mandatory 5.0 hour accessibility requirement.

Professional engineers and architects seeking continuing education credit in other states will be able to claim the hours earned through this webinar, in most cases. Refer to specific state rules to determine eligibility.

The American Institute of Architects Continuing Education System has approved this course for 5.0 LU|HSW (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

The International Code Council has approved this course for .5 CEUs in the specialty
area of Accessibility.

HalfMoon Education is an approved CM Provider with the American Planning Association. This course is registered for CM | 5.0 for Certified Planners.

Completion certificates will be awarded to participants who complete this event, respond to all prompts, and earn a passing score (80%) on the quiz that follows the presentation (multiple attempts allowed).

Speakers

Glenn Dea AIA ADAC CASp

President of Collaborative Access Studio
Employed in the architecture and construction industry since 1988, Mr. Dea is a licensed architect in the states of California and Utah and is an ICC-certified accessibility inspector/plans examiner. Since 2001, his practice has focused on compliance with federal and state accessibility standards, Americans with Disabilities Act (ADA) transition plan services, and accessible design covering buildings, sites, and pedestrian facilities in public rights-of-way. This has encompassed accessibility evaluations, plan reviews, and code analyses for numerous corporate, education, and governmental clients.

Summary of Experience

  • Consultant access compliance plan reviewer to California’s Division of the State Architect (DSA) – Los Angeles Basin Region Office (2004-2011)
  •  One of California’s first certified access specialists (CASp #023), based on experience and testing criteria administered by the DSA (2008)
  • Alternate delegate (2014-2021) and primary delegate (2021-current) to the ICC/ANSI Committee on Accessible and Usable Buildings and Facilities, contributing to creation of the 2017 edition of the ICC A117.1 Accessibility
    Standard. The A117.1 Standard is adopted by building code jurisdictions throughout the United States.
  • Provider of over 50 accessibility training presentations to licensed architects and engineers, attorneys, public agencies, and professional organizations, including a 5-hour course addressing the continuing education
    requirement for California architects.
  •  Provider of technical assistance to attorneys and other clients to assist in the resolution of lawsuits,complaints, and claims related to state and federal access laws.

AIA Info

AIA Provider Statement:

HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).

This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.

AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.

Course Title: Designing for Accessibility under ADA Standards and the CBC

Delivery Method: Live Online

Course Description:  This course covers compliance with federal and California accessibility requirements, readily-achievable barrier removal, alterations, new construction, safe harbors, and indoor and outdoor features and facilities.

Learning Objectives:

Learning Objective 1:
Learners will be able to explain the relationship between the federal Americans with Disability Act and the California Building Code and identify the entities and facilities that are covered by accessibility standards.

Learning Objective 2:
Learners will be able to identify readily-achievable barrier removal opportunities and distinguish requirements for alterations and new construction.

Learning Objective 3:
Learners will be able meet accessibility standards compliant with both the ADA and the California Building Code for outdoor travel paths, accessible parking, exterior accessible routes, ramps and stairways, entrances and doors, and recreational facilities.

Learning Objective 4:
Learners will be able meet accessibility standards compliant with both the ADA and the California Building Code for interior accessible routes, toilet facilities, showers, drinking fountains, kitchen facilities, signage, assembly areas, and assistive listening systems.

LUs: 5.0                                                                                              LU Type: LU|HSWs.

Prerequisites: Familiarity with accessibility principles and compliance

Advance Preparation: None

Program Level: Intermediate

Course Expiration Date: 12/16/2024

Complaint Resolution Policy:

Complaints regarding this course can be emailed to tcase@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.