Complying with Fire and Building Codes Seminar
Agenda
This seminar will now be presented as a live, online webinar.
This webinar will not be streamed at the previously advertised location – it must be taken via computer.
Webinar insturctions will be sent via email before the date.
Log into Webinar: 8:00 – 8:30 am
Morning Session: 8:30 – 11:45 am
Break: 11:45 am – 12:45 pm
Afternoon Session: 12:45 – 4:30 pm
Fire Protection and Life Safety Design
Applicable codes
• International Fire Code
• National Fire Protection Association (NFPA) codes
• Tennessee building codes
• Local ordinances
Scope and purpose of codes and ordinances
Special occupancies: health care facilities and others
Occupancy Classifications
General requirements and criteria
• Change of use and /or change of occupancy
• Hazard classifications
Life safety issues
Design specifications and scenarios
Evaluation and documentation
Means of Egress
Exit access, discharge and other components
• Impediments to egress
Calculating and determining occupant loads
• Gross vs. net
Arrangement of exits
Equivalency discussion
Case studies
Fire Protection Features and Equipment
Walls, signage
Fire detection, alarm and communication systems
Sprinkler systems
Credits
Architects
6.5 HSW PDHs
6.5 AIA LU|HSW
Professional Engineers
6.5 HSW PDHs
Interior Designers
6.5 HSW PDHs
International Code Council
.65 CEUs (Fire)
Tennessee Code Inspectors
Applied/Pending – Fire
Contractors
Non-Credit CE
Continuing Education Credit Information
This seminar is open to the public and offers 6.5 HSW PDHs to Tennessee architects, engineers, and interior designers. Educators and courses are not subject to preapproval in Tennessee.
This seminar is approved by the American Institute of Architects Continuing Education System for 6.5 LU|HSW (Sponsor No. J885). Visit www.halfmoonseminars.org for complete AIA/ CES course information under this seminar listing. Only full attendance is reportable to the AIA/CES.
Architects and engineers seeking continuing education credit in other states will be able to apply the hours earned at this seminar, in most cases. Refer to specific state rules to determine eligibility.
The International Code Council has approved this event for .65 CEUs in the specialty area of Fire.
HalfMoon Education has applied to the Tennessee Department of Commerce and Insurance, Division of Fire Protection for course approval, which is pending.
The current status of the pending course credit can be found at www.halfmoonseminars.org or by calling 715-835-5900 ext. 1.
This seminar offers a non-credit continuing education opportunity to construction contractors. HalfMoon Education is not seeking contractor continuing education approval in any state.
Attendance will be monitored, and attendance certificates will be available after the seminar for most individuals who complete the entire event. Attendance certificates not available at the seminar will be mailed to participants within fifteen business days.
Speakers
Justin Biller, P.E., FSFPE, MCP, CFPS, CBO
Owner and Principal Fire Protection Engineer at Emerson Graham + Associates, Roanoke, VAMr. Biller is owner and principal fire protection engineer of Emerson Graham + Associates – a fire protection engineering and code consultancy firm, as well as principal and code consultant for CODEcheck Consulting, a third-party review agency serving multiple local jurisdictions with third-party plan review and inspection services. He also serves as a fire protection engineer for George Mason University’s (GMU) Office of the University Building Official (OUBO), wherein he reviews fire protection and fire/life safety compliance. Mr. Biller holds registration as a professional engineer in multiple states including Virginia. He is a member of the International Code Council (ICC), a fellow of the Society of Fire Protection Engineers (SFPE), a member of the Automatic Fire Alarm Association (AFAA) and the National Fire Sprinkler Association (NFSA), and a member of the National Fire Protection Association (NFPA), currently serving on four technical committees of which the Building Construction and Life Safety Code chapters are included. Mr. Biller is an NFPA certified fire protection specialist (CFPS), and he holds the master code professional (MCP), certified building official (CBO), and certified fire official (CFO) certifications, in addition to multiple other code compliance certifications from the ICC. He is a 2014 graduate of the MSc. Fire Protection Engineering program at California Polytechnic State University, and he is a 2007 undergraduate of the BSc., Engineering Technology program at Old Dominion University.
Mr. Biller is an adjunct lecturer at Eastern Kentucky University and University of North Carolina at Charlotte in each of the respective undergraduate programs in Fire and Safety Engineering Technology. In his educational background, he has taught on an array of courses including fire and building codes, fire behavior and fire dynamics, human behavior in fire, fire protection systems and hydraulics, fire modeling and performance-based aspects of fire protection engineering design, fire prevention and fire protection public policy.
AIA Info
AIA Provider Statement:
HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).
This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.
AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
Course Title: Complying with Fire and Building Codes
Delivery Method: Live
Course Description: This 6.5 hour live lecture presentation examines applicable codes, including the International Fire Code, National Fire Protection Association (NFPA) codes, state building codes, and local ordinances. It studies occupancy classifications, means of egress, and fire protection features and equipment.
Learning Objectives:
Learning Objective 1:
Learners will be able to identify and comply with applicable international, national, state, and local codes that address fire protection and life safety design and provisions for special occupancies, including health care facilities.
Learning Objective 2:
Learners will be able to differentiate occupancy classifications and loads and identify their hazard classifications.
Learning Objective 3:
Learners will be able to comply with code provisions for exit access and discharge (egress) and be able to calculate and determine occupant loads for the number of exits and arrangement of exists.
Learning Objective 4:
Learners will be able to comply with code provisions for wall signage for identify means of egress, fire detection, alarm and communication systems warning occupants and emergency personnel of a fire, and sprinkler systems.
LUs: 6.5 LU Type: LU|HSWs.
Prerequisites: Experience with design, construction, and code compliance
Advance Preparation: None
Program Level: Intermediate
Course Expiration Date: 06/24/2022
Complaint Resolution Policy:
Complaints regarding this course can be emailed to doug@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.