Webinar instructions will be emailed before the date of the webinar.

Please log into the webinar 15 – 30 minutes before start time.

Tuesday, July 25, 2023 
8:00 am – 5:00 pm CDT (including a 60-min. break)


Chapter 1, General                                                                                                                                  

  • New Articles  
  • Articles Global changes 
  • Article 90 Scope  Article 100 Definitions
  • Article 110.3 – 110.34 Requirements for Electrical Installation        

Chapter 2, Wiring and Protection  

  • Article 220.70 – 220.120 Branch circuits Feeders, & Service Calculations                       
  • Article 225.41 – 225.61 Outside Branch Circuits and Feeders  
  • Article 230.43 – 230.212 Services  
  • Article 235.1 – 235.412 Branch Circuits, Feeders, and Services Over 1000V ac, 1500V dc 
  • Article 240.2 – 240.100 Overcurrent Protection Article
  • 242.2 – 242.9 Overvoltage Protection  
  • Article 250.3 – 250.148 Grounding and Bonding  


Chapter 3, Wiring Methods and Materials                  

  • Article 300.2 – 300.26 General Requirements for Wiring Methods and Materials 
  • Article 305.1 – 300.15  Article 305 General Requirements for Wiring Methods and Materials for Systems  Rated Over 1000 Volts ac, 1500 Volts dc, Nominal  
  • Article 310.10 – 310.16 Conductors for General Wiring  
  • Article 312.10 – 310.102 Cabinets, Cutout Boxes, and Meter Socket Enclosures 
  • Article 314.5 – 314.104 Outlet, Device, Pull, and Junction Boxes; Conduit Bodies; 
  • Article 315.10 – 315.60 Medium Voltage Conductors, Cable, Cable Joints, and Cable Terminations  
  • Article 320.23 Armored Cable   
  • Article 322.56  Flat Cable Assemblies: Type FC  
  • Article 330.112 Metal-Clad Cable: Type MC  
  • Article 334.10 Nonmetallic-Sheathed Cable: Types NM and NMC  
  • Article 335 Instrumentation Tray Cable: Type ITC  
  • Article 340.10 Underground Feeder and Branch-Circuit Cable: Type UF  
  • Article 342.20  Intermediate Metal Conduit (IMC)  
  • Article 344 .28 Rigid Metal Conduit (RMC)  
  • Article 348.2  Flexible Metal Conduit (FMC)  
  • Article  350.2 Liquidtight Flexible Metal Conduit (LFMC)  
  • Article 352.10 – 352.44 Rigid Polyvinyl Chloride Conduit (PVC)  
  • Article 356.10 Liquidtight Flexible Nonmetallic Conduit (LFNC)  
  • Article 358 Electrical Metallic Tubing: Type EMT  
  • Article 366.10 Auxiliary Gutters  
  • Article 369.1 – 369.120  Insulated Bus Pipe (IBP)/Tubular Covered Conductors (TCC) Systems  
  • Article 371.1 – 371.120 Article 371 Flexible Bus Systems  
  • Article 392.10 Cable Trays  
  • Article 393.6  Low-Voltage Suspended Ceiling Power Distribution Systems 
  • Article 395.1 – 395.30  Outdoor Overhead Conductors over 1000 Volt  
  • Article 398.15 Open wiring on Insulators  


Chapter 4, Equipment for General Use               

  • Article 400.40 – 400.52 Flexible Cords and Flexible Cables  
  • Article 404. 1 – 404.30  Switches   
  • Article 406.2 – 406.12 Receptacles, Cord Connectors, and Attachment Plugs (Caps)  
  • Article 408.2 – 408.42 Switchboards, Switchgear, and Panelboards  
  • Article 409.60 – 409.70 Industrial Control Panels 
  • Article 410.2 – 410.198  Luminaires, Lamp holders, and Lamps 6 slides 
  • Article 422.16 – 422.18 Appliances  
  • Article 424.48 – 424.66 Fixed Electric Space Heating Equipment  
  • Article 426.28 Fixed Outdoor Electric Deicing and Snow-Melting Equipment  
  • Article 430.2 – 430.204 Motors, Motor Circuits, and Controllers  
  • Article 440.8 – 440.14 Air-Conditioning and Refrigerating Equipment  
  • Article 445.18 – 445.19 Generators Emergency Shutdown of Prime Mover 
  • Article 450.43 Transformers and Transformer Vaults (Including Secondary Ties)  
  • Article 460.24 Capacitors  
  • Article 470 Resistors and Reactors 
  • Article 495.1 – 495.74 Equipment Over 1000 Volts ac, 1500 Volts dc, Nominal    


Chapter 5, Special Occupancies  

  • Article  500 – 504     Hazardous (Classified) Locations, Classes I, II, & III, Divisions 1 and 2   
  • Article 505.9 – 505.16 Zone 0, 1, and 2 Locations  
  • Article 512.1 – 512.32 Cannabis Oil Equipment and Cannabis Oil Systems Using Flammable Materials.  
  • Article 514.7 Motor Fuel Dispensing Facilities 514.7 Wiring & Equipment Above Hazardous Locations.  
  • Article 515.10 Bulk Storage Plants  
  • Article 517.1 – 517.30 Heath Care Facilities  
  • Article 518.2 – 518.5 Assembly Occupancies  
  • Article 520.53 Theaters, Motion Picture & Television Studios & Audience Areas  
  • Article 530.1 Motion Picture and Television Studios and Remote Locations  
  • Article 547.1 – 547.44 Agricultural Buildings 
  • Article 550.32 Mobile Homes, Manufactured Homes, and Mobile Home Parks  
  • Article 551.3 – 551.77 Recreational Vehicles and RV Parks  
  • Article 555.4 – 555.38 Marinas, Boatyards, Floating Buildings & Docking Facilities  
  • Article 590.4 Temporary Installation  


Chapter 6, Special Equipment  

  • Article 600.5 – 600.35 Electric Signs and Outline Lighting  
  • Article 620.12 – 620.36 Elevators Dumbwaiters, Moving Walks & Platforms  
  • Article 625.40 – 625.49 Electric Vehicle Power Transfer System 
  • Article 630.8 – 630.13 Electric Welders  
  • Article 670.5 Industrial Machinery 
  • Article 680.5 – 680.83 Swimming Pools, Fountains, and Similar Installations   
  • Article 690.1 – 690.31 Solar Voltaic (PV) systems 
  • Article 695.1 – 695.2 Fire Pumps  


Chapter 7, Special Conditions  

  • Article 700.2 701.2, 702.2, 708.2 Global Change reconditioned  
  • Article 700.3 – 700.12 Emergency Systems 
  • Article 701.4 – 701.12 Legally Required Standby Systems  
  • Article 705.5 – 705.50 Interconnected Electric Power Production Sources  
  • Article 706.7 Energy Storage Systems 
  • Article 708.7 Critical Operations Power Systems (COPS)  
  • Article 722 Cables for Power-Limited Circuits and Fault-Managed Power Circuits 
  • Article 726.1 – 726.144 Class 4 Fault-Managed Power Systems  
  • Article 726 Explanatory Video Class 4 Circuits U Tube 
  • Article 760.136 Fire Alarm Systems  


Chapter 8, Communications Systems  

  • Article 800.179 General Requirements for Communications Systems  
  • Article 805.170 Communications Circuits 
  • Article 840.160 Premises-Powered Broadband Communications Systems  


Chapter 9, Tables  

  • Table 13 Equipment Suitable for Hazardous (Classified) Locations 


 Webinar Instructions
Each webinar session earns continuing education credit and can be registered for individually. All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.

Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.

Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.

GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)

Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled

Internet connection: Minimum of 1Mbps       Hardware: 2GB RAM or more

For more information, visit the Support section at


Professional Engineers
8.0 PDHs

8.0 HSW CE Hours

8.0 HSW LUs

International Code Council
.8 CEUs (Electrical


Continuing Education Credit Information

This webinar is open to the public and is designed to qualify for 8.0 PDHs for professional engineers and 8.0 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider No. 0004647), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.

The American Institute of Architects Continuing Education System has approved this course for 8.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

The International Code Council has approved this event for .8 CEUs in the specialty area of Electrical (Preferred Provider No. 1232).

Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

On-Demand Credits
The preceding credit information only applies to the live presentation. This course in an on-demand format may not be eligible for the same credits as the live presentation; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:

8.0 HSW LUs (AIA) )


Chad Kurdi

Electrical Engineering Discipline Lead, Partner at BKV Group in Minneapolis

Mr. Kurdi has been serving the electrical industry for over 30 years as an electrical engineer, electrician, and electrical trainer. Mr. Kurdi has worked as an electrical engineer and electrician at many engineering firms and electrical companies. Currently Mr. Kurdi is the head of the electrical engineering group at BKV Group (Architectural & Engineering Firm) in Minneapolis. Mr. Kurdi has a Bachelor of Science degree in Electrical Engineering and a Master’s degree in Adult Education. He is a registered electrical engineer (PE) in 37 states. Mr. Kurdi holds a Class A master electrician license from the State of Minnesota. Mr. Kurdi was an electrical instructor and department director at Dunwoody College of Technology in Minneapolis for 12 years. He is also an electrical trainer for Electrical Association (Minneapolis) for 19 years. He has developed and taught thousands of seminar hours over the years. The seminars include NEC Code, electrician’s exam prep, MV system, electrical wiring, electrical apprenticeship, estimation & project management, electrical design and AutoCAD & Revit MEP.

AIA Info

AIA Provider Statement:

HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES ( or (800) AIA 3837, Option 3).

This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.

AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.

Course Title: 2023 National Electrical Code Update

Delivery Method: Live Online

Course Description: This eight-hour course analyzes the changes and updates to the National Electrical Code effective in 2023. The course includes chapters 1-9 and examines over 70 specific articles of the code.

Learning Objectives:

Learning Objective 1:
Learners will be able to analyze Chapter 2 of the National Electrical Code, including branch circuits, feeders, overcurrent protection, grounding and bonding, and focus on relevant updates.

Learning Objective 2:
Learners will be able to comply with Chapter 3 of the National Electrical Code and its updates impacting conductors for general wiring, armored cables, rigid metal conduits, cable trays, insulated bus pipe and more.

Learning Objective 3:
Learners will be able to reference updates to Chapter 4 of the National Electrical Code, specifically to switches, receptacles, appliances, air-conditioning, transformers, capacitors, resistors and more.

Learning Objective 4:
Learners will be able to discuss updates to Chapter 5 of the National Electrical Code, such as those impacting motor fuel dispensing facilities, health care facilities, assembly occupancies, agricultural buildings and more.

LUs: 8.0                                                                                             LU Type: LU|HSWs.

Prerequisites: Experience with electrical design

Advance Preparation: None

Program Level: Intermediate

Course Expiration Date: 05/18/2026

Complaint Resolution Policy:

Complaints regarding this course can be emailed to or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.

Streamable MP4/PDF Price: $329.00


Before undertaking any on-demand effort, you should review the rules of your licensing/certifying entity. It’s your responsibility to determine whether or not this on-demand course meets your continuing education requirements.

You must take and pass a quiz in order to receive credit. You can take the quiz as many times as needed and there is no time limit on the quiz. Once the quiz is completed, you will be asked to download your certificate.

Videos that qualify for AIA, LACES, ASLA, or CLARB credit will require an extra week for processing.

Streamable MP4/PDF

Available approximately 1 week after the date of the live event or the date of your order, whichever is later.

To track your purchase you will need to create an account on the website using the email address used for your registration.

The video will have occasional question prompts that will not allow the video to progress unless they are answered. You will not be able to skip forward while watching the video.

If you attempt to resume watching the video on a separate device, your progress will not be saved.

Click the link which appears at the end of the video to be taken to the course quiz.


HalfMoon will mail these materials via USPS. Please allow 2 weeks from the date of purchase to receive your product. If the live seminar is in the future, please allow 5 weeks from the date of the live seminar.

The link to the quiz will be available in a PDF in your USB drive marked QUIZ.

HalfMoon will contact you and issue a full refund if the product you ordered is not available. However, refunds will not be issued if completion certificates are requested.

Please contact HalfMoon Education if you have any questions during the process of taking this course. (715) 835-5900 or