Agenda
Receive a discounted tuition of $500
when you register for all three webinar sections!
Webinars are conducted on a platform called Go-to-Webinar. Instructions and
login information will be provided in an access email sent closer to the date of the webinar.
View system requirements here.
All attendees must log-on through their own email – attendees may not watch
together if they wish to obtain CE credit. HalfMoon Education Inc. must be able to prove
attendance if either the attendee or HalfMoon Education Inc. is audited.
National Electrical Code, Part I
July 26, 2016, 12:00 – 4:30 PM EDT (including a 30 min. break)
The 2014 National Electrical Code
• New Editions
• New Articles and New Informative Annex
• Code-Wide Changes
Article 90 – Introduction
• Purpose and Scope
• Enforcement
• Code Arrangement
• Rules and Explanatory Material
• Units of Measurement
Article 100 – Definitions
• Two or More Articles vs. One Article
• Part I and Part II
• New and Moved Definitions
• Revised Definitions
Article 110 –Requirements for Electrical Installations
• Overview
• Installation and Use
• Unused Openings
• Arc-Flash Warning
• Lockable Disconnecting Means
• Spaces About Electrical Equipment
Articles 210 and 215 – Branch Circuits and Feeders
• Scope of Article 210
• Multiwire Branch Circuits
• Grouping
• Ground Fault Circuit Interrupter Protection
• Scope of Article 215
• Definition of Feeder
National Electrical Code, Part II
July 27, 2016, 12:00 – 4:30 PM EDT (including a 30 min. break)
Article 240 – Overcurrent Protection
• Overcurrent Protection Overview
• Protection of Conductors
• Round-Up Rule
• Small-Conductor Rule
• Tap Rules
• Transformer Secondary Conductor Rules
Article 250 – Grounding and Bonding
• Grounding and Bonding Terms Defined
• Grounding Electrode Conductor Sizing
• Sizing Conductors in Table 250.102(C)(1)
• Equipment Grounding Conductor Sizing
• Permitted Connection Methods for Grounding and Bonding
• Separately Derived Systems
• Grounding and Bonding for Separate Buildings and Structures
National Electrical Code, Part III
July 28, 2016, 12:00 – 4:30 PM EDT (including a 30 min. break)
Article 310 – Conductors for General Wiring
• Grounded Conductor vs. Neutral Conductor
• Grounded Conductor Identification
• Specifications for Sizing Conductors
• Conductor Temperature Limitations
• Continuous Loads
• Correction and Adjustment Factors
Article 314 – Outlet, Device, Pull, and Junction Boxes; and Conduit Bodies
• Scope of Article 314
• Damp and Wet Locations
• Box Fill Calculations
• Boxes and Conduit Bodies
Article 408 – Switchboards, Switchgear and Panelboards
• Scope of Article 408
• Used as Service Equipment
• Circuit Identification
• Transformer Disconnecting Means
Article 430 – Motors
• Scope of Article 430
• Motor Circuits and their Components
• Motor Table Values
• Motor Overload Protection
• Branch-Circuit Protection
• Motor Markings
• Motor Controllers
• Disconnecting Means
Credits
Architects:
12.0 HSW Contact Hours
(AIA: 12.0 HSW LUs)
Engineers:
12.0 PDHs
International Code Council:
12.0 Contact Hours
1.2 CEUs
HalfMoon Education is approved as a continuing education sponsor by the American Institute of Architects (Provider No. J885). HalfMoon Education is an approved continuing education sponsor for architects in Florida and is deemed an approved sponsor in New York. HalfMoon Education is an approved continuing education sponsor for engineers in Florida, Indiana, Louisiana, Maryland, New Jersey (Approval No. 24GP00000700), NewYork (NYSED Sponsor No. 35), North Carolina, and North Dakota. Educators and courses for architects and engineers are not subject to preapproval in other states.
Speakers
Charles Miller
Master Electrician, business owner, author, educator in Lebanon, TN
Mr. Miller spent 18 years as a successful business owner and electrical contractor. Since then, he has focused his time and energy on writing and teaching to promote knowledge and proficiency among engineers, electricians, and tradespeople in the field. Throughout his career, he has passed more than 45 Master Electrical exams (with a score of 93 or higher) and seven Electrical Inspector exams. As an author and illustrator, he has an extensive list of electrical-related publications to his credit, including some published by the National Fire Protection Association (NFPA). Mr. Miller also sits on two NFPA committees, including the committee for the NFPA 70E standard.
“Even as an electrician and contractor working in commercial and industrial environments, I’ve always been a very visual person,” says Mr. Miller. “Codes and standards can be very difficult and very dry. As an instructor I try to convey the information in a way that enables my students to visualize more so they’ll retain the information and actually put it to good use.”
In 1988 he began to focus and dedicate himself to electrical-related training. Besides teaching his own custom tailored classes and seminars covering various aspects of the electrical industry, Mr. Miller partners with some of the top electrical training organizations in the country. His list of achievements include teaching with the National Fire Protection Association (NFPA).
His work as an author and illustrator includes: Illustrated Guide to the National Electrical Code (Delmar Cengage Learning, 1999 – present); “Code In Focus” column for Electrical Contractor magazine (1999 – present); Pocket Guide to Residential Electrical Installations (NFPA, 2001 – 2011); Pocket Guide to Commercial and Industrial Electrical Installations (NFPA, 2001 – present); Ugly’s Electrical References (Jones and Bartlett Learning, 2019); Ugly’s Electrical Safety and NFPA 70E (Jones and Bartlett Learning, 2011); The Electrician’s Exam Prep Manual (Jones and Bartlett Publishers, 2007); NFPA’s Pocket Electrical References (Jones and Bartlett Publishers, 2007); and NFPA’s Electrical References (NFPA, 2004). Mr. Miller served for more than three years as a co-host of “House Calls,” a home improvement radio talk show on 1510 AM WLAC in Nashville, Tennessee.
There are 3 Courses in This Seminar
