Agenda
Attend all three courses in this full program series and save 25% ($89)!
Webinar instructions will be emailed 24-48 business hours before the date of the webinar.
Please log into the webinar 15 – 30 minutes before start time.
Full Series Course Agendas:
Wednesday, January 14, 2026
9:00 am – 11:00 am CST
Agenda:
Presented by Marc Miller
- Understanding the fundamentals of geothermal systems
- Key differences between open-loop and closed-loop systems
- Site selection criteria for geothermal installations
- Overview of environmental and energy efficiency benefits
- Essential components of a geothermal heat pump systems and configurations
- Addressing misconceptions and limitations of geothermal technology
Geothermal: Exploring Thermal Energy Networks and Hybrid Geothermal Systems
Wednesday, January 21, 2026
9:00 am – 11:00 am CST
Agenda:
Presented by Marc Miller
- Defining thermal energy networks and their application in district heating/cooling
- Integrating geothermal energy into thermal networks
- Other thermal energy harnessing technology hybrid geothermal systems and their benefits
- Geothermal electrical generation plants, binary-cycle, and EGS technology
- Environmental and economic advantages of geothermal energy in modern energy systems
- Maintenance/water treatment considerations for networked systems
Geothermal Hydronic Fundamentals and One-Pipe Ambient Temperature Loops
Wednesday, January 28, 2026
9:00 am – 11:00 am CST
Agenda:
Presented by Marc Miller
- One-pipe ambient temperature loops explained and their advantages over two pipe systems
- Designing efficient one-pipe thermal energy network systems w/ geothermal integrations
- Advantages of ambient temperature loops for HVAC systems
- The role of modern controls and sensors in optimizing hydronic systems
- Common issues in one-pipe loops that limit efficiency
- Hydronic System Solutions Software
Webinar Instructions
All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.
Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.
Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.
GoToWebinar App requirements:
Windows 10 or higher, macOS 11 or higher, Linux, Google Chrome OS
Web Browser:
Google Chrome (most recent 3 versions)
Microsoft Edge (most recent 3 versions)
Internet connection: 1 Mbps or better
Hardware: 2GB of RAM (minimum), 4GB or more of RAM (recommended)
For more information, visit the Support section at www.gotowebinar.com
Credits
Engineers
6.0 PDHs (2.0 per course)
Architects
6.0 HSW CE Hours (2.0 per course)
AIA - American Institute of Architects
6.0 HSW LUs (2.0 per course)
ICC - International Code Council
0.6 CEUs (Energy) (0.2 per course)
Continuing Education Information
These webinars are open to the public and is designed to qualify for 6.0 PDHs for professional engineers and 6.0 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.
HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00049300) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers, architects and landscape architects via its registration with the American Institute of Architects Continuing Education System (AIA/CES). Other states do not preapprove continuing education providers or courses.
The American Institute of Architects Continuing Education System has approved these courses for 6.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.
The International Code Council has approved these events for .6 CEUs in the specialty area of Energy (Preferred Provider No. 1232).
Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).
*On-Demand Credits*
The preceding credit information only applies to the live presentation. This course in an on-demand format is not pre-approved by any licensing boards and may not qualify for the same credits; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:
6.0 HSW LUs (AIA)
Speakers
Marc Miller
President HVAC Pro InsightsMr. Miller has been a distinguished leader in the HVAC industry since 1995, bringing three decades of expertise spanning nearly all areas of focus in the HVAC industry. He holds an HVAC Master’s License in Maryland and Virginia, as well as a Stationary Engineer license. Mr. Miller is a proud member of the American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE), recently lecturing at the 2025 annual conference regarding Thermal Energy Networks. In 1998, he obtained a Security Clearance, enabling him to work on highly specialized and mission-critical classified mechanical, electrical, and plumbing (MEP) projects across the globe. His portfolio includes HVAC construction and system integrations in Egypt, India, the UK, Western Europe, the Caribbean, and throughout the United States, projects that extend far beyond the scope of traditional commercial MEP work. Since 2016, Mr. Miller has been based in Scottsdale, Arizona, where he continues to provide subject-matter expertise in all areas of HVAC. He also founded ProProfitBuild.com, a platform dedicated to empowering tradesmen and construction professionals. With real-world proven strategies, he addresses financial management practices, 1:1 construction and business management mentoring, and implementing proven practices and procedures to improve the continuity of business for trade-oriented businesses.
6 Knowledge Points
Purchase this course using Knowledge Points by clicking the button below.
(Account login required. Knowledge Points can only be redeemed by the owner of the points. Cannot be combined with any other forms of payment)