Cut Slope and Fill Slope Design, Construction and Repair
Agenda
Webinar instructions will be emailed before the date of the webinar.
Please log into the webinar 15 – 30 minutes before the start time.
Friday, April 5, 2024
9:00 – 4:00 pm CST
Presented by Curran E. Mohney
Overview of Cut and Fill Slope Operations
- Purposes of cut and fill operations
- Standards and best practices
- Site planning
Rock Cut Design
- Exploration of site geology
- Rock types and properties
- Rock mass properties
- Testing procedures
- Groundwater investigations
- Determining design slope angles
- Handling special conditions and formations
- Creating benches
- Rockfall catchment design
- Handling water
- Blasting and excavation
Soil Cut Design
- Exploration of site soils
- Soil types and properties
- Determining slope angles
- Groundwater investigations
- Handling spoil
- Drainage design
Fill Slope Design
- Determining slope angles
- Fill material needs
- Drainage
- Slope reinforcement
Cut Slope and Fill Slope Repair and Case Studies
- Cut and fill slope repair
- Case studies
Webinar Instructions
All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.
Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.
Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.
GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)
Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled.
Internet connection: Minimum of 1Mbps Hardware: 2GB RAM or more
For more information, visit the Support section at www.gotowebinar.com
Credits
Engineers
6.0 PDHs
Architects
6.0 HSW CE Hours
AIA - American Institute of Architects
6.0 HSW LUs
Landscape Architects
6.0 HSW CE Hours
LACES - Landscape Architecture Continuing Education System
6.0 HSW LUs
ICC - International Code Council
.6 CEUs (Sitework)
Continuing Education Credit Information
This webinar is open to the public and is designed to qualify for 6.0 PDHs for professional engineers, 6.0 HSW continuing education hours for licensed architects, and 6.0 HSW continuing education hours for landscape architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.
HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.
The American Institute of Architects Continuing Education System has approved this course for 6.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.
The Landscape Architecture Continuing Education System has approved this course for 6.0 HSW PDHs. Only full participation is reportable to the LA CES.
The International Code Council has approved this event for .6 CEUs in the specialty area of Sitework (Preferred Provider No. 1232).
Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).
On-Demand Credits
The preceding credit information only applies to the live presentation. This course in an on-demand format may not be eligible for the same credits as the live presentation; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:
6.0 HSW LUs (AIA)
6.0 HSW PDHs (LACES)
Speakers
Curran E. Mohney
Engineering Geologist for the Oregon Department of TransportationMr. Mohney is the Engineering Geology Program leader for the Oregon Department of Transportation (ODOT). The Engineering Geology Program at ODOT encompasses site characterization, subsurface exploration, slopes and embankments, geologic hazards, groundwater, geotechnical instrumentation, and planning and research activities. In this role, he also oversees the Unstable Slopes (landslide/rockfall) Program for ODOT. He is a registered geologist and a certified engineering geologist in Oregon with over 25 years of experience in Oregon and the western states. Mr. Mohney has been the Engineering Geology Program leader since 2004. Prior to this, he had been a staff and project-level geologist for consulting firms and the mining industry as well as for ODOT. He is a graduate of the Geology Program at Portland State University. During his professional career, Mr. Mohney has been involved in the investigation, design, and mitigation of hundreds of landslides and rockfalls.
AIA Info
AIA Provider Statement:
HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).
This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.
AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
Course Title: Cut Slope and Fill Slope Design, Construction and Repair
Delivery Method: Live Online
Course Description: This six-hour course explores the comprehensive aspects of cut and fill slope design, construction, and repair, covering key topics such as the purposes of cut and fill operations, standards, best practices, site planning, rock and soil cut design, and repair techniques.
Learning Objectives:
Learning Objective 1:
Learners will be able to explain the purpose of cut and fill operations and discuss standards, best practices, and site planning considerations.
Learning Objective 2:
Learners will be able to explore rock cut design, site geology, rock types/properties, testing procedures, and safety measures during excavation.
Learning Objective 3:
Learners will be able to analyze soil cut design, site soils and their properties, determine slope angles, drainage, and handling for effective and safe construction.
Learning Objective 4:
Learners will be able to identify slope design and repair principles related to slope angles, material requirements, and reinforcement techniques.
LUs: 6.0 LU Type: LU|HSWs.
Prerequisites: Experience with site planning.
Advance Preparation: None
Program Level: Intermediate
Course Expiration Date: 02/12/2027
Complaint Resolution Policy:
Complaints regarding this course can be emailed to fchapman@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.