Agenda

Webinar instructions will be emailed before the date of the webinar.

Please log into the webinar 15 – 30 minutes before start time.

Thursday, November 10, 2022
9:00 am – 4:30 pm CST (including a 30-min. break)

 

Presented by
Juan C. Correa, PE

Agenda
New Working Project; Planes in Space; Sketch Creation
Description projects, creation, and placement, description of the Workspace sections
Working planes description, setting, and management
Sketch definition, dimensional, and geometric constrains, fully constrained sketch

Disk Part: Circles, Extrusion, Sketch Dimensioning, Dimensional Constrains
Sketch creation, constraints application (dimensional, and geometric)
Creation, and saving parts
Extrusion feature, in customary system and SI (Système international)
Creation of the disk part
Parts’ edition, and modification

Flange Part: Circles, Revolve, Adding Primitives on the Ribbon, Cut Feature
Revolving feature
Creation of the flange part
Adding primitives on the ribbon

Geometric Constrains, Fillet Practice and Q&A,
Review Course Material
Cut feature
Geometric constrains, fillet practice

Reviewing Concepts and Answering Questions
Q&A, review course material

Exploring Materials and Physical Properties
Materials, and appearances (Autodesk material library, and inventor material library)
iProperties
Exploring materials and physical properties

New Shaft Creation; Use Primitive Feature, Removing Material 
New shaft creation; use primitive feature, removing material

New Key Creation; Use Primitive Feature, Draft Feature
New key creation; use primitive feature, draft feature
Practice and Q&A, certificates and consulting session

 

Webinar Instructions
All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.

Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.

Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.

GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)

Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled

Internet connection: Minimum of 1Mbps       Hardware: 2GB RAM or more

For more information, visit the Support section at www.gotowebinar.com

Credits

Professional Engineers:
6.5 PDHs

*This webinar is not approved in New York and other states
which require HSW coursework.

 

Continuing Education Credit Information
This webinar is open to the public and is designed to qualify for 6.5 PDHs for professional engineers in all states that allow non-HSW coursework.

HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider No. 0004647), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130).

This webinar is not approved in New York and other states which require HSW coursework.

Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

Speakers

Juan C. Correa PE

Juan C. Correa, PE  Engineering Director, EngVentions Engineering
 As EngVentions Engineering Solutions founder and CEO, with 25 Years in Engineering and Operations, holds his responsibilities included the Director of Engineering, and 3D modeling software specialist and instructor. Juan C. Correa graduated as a Petroleum Engineer from Universidad de America at Bogota DC. After graduation, he started his career by working in the oil industry as a mechanical technician for oil and gas drilling operations, gained positions as Top Drive specialist, Drilling tools representative, and Drilling Bits, and Drilling Tools Design Engineer. He has worked in drilling operations for M-I SWACO Drilling Fluids, Canrig Drilling Technology, Tri-Max Industries, Baker Hughes (BHGE), and ReedHycalog (NOV). At EngVentions Engineering, he has designed Jet Pumps, Production Plungers, and drilling stabilizers. Recently he created and developed an Expandable Drilling Bit for Oil and Gas drilling applications, Mr. Correa holds a Patent under his name over an Expandable Drilling bit. Under Mr. Correa’s direction, EngVentions Educational Services has designed a series of short courses of 3D modeling, using Autodesk® AutoCAD® and Autodesk® Inventor® platforms to deliver instruction to the U.S. industrial community. His expertise provides CAD expertise, engineering design, calculations, Patents, and new tools developments.