Agenda

Webinar instructions will be emailed before the date of the webinar.

Please log into the webinar 15 – 30 minutes before the start time.

Wednesday, April 3, 2024 
1:30 – 4:45 pm CDT

 

Presented by Gregory E. Halsted, P.E.

Agenda Highlights:

  • Introduction to Reinforcing
  • Ensuring Success
  • The Ultimate Composite Material
  • Common Applications

 

Webinar Instructions

All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.

Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.

Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.

GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)

Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled.

Internet connection: Minimum of 1Mbps       Hardware: 2GB RAM or more

For more information, visit the Support section at www.gotowebinar.com

Credits

Engineers
3.0 PDHs

Architects
3.0 HSW CE Hours

AIA - American Institute of Architects
3.0 LU|HSW

ICC - International Code Council
.3 CEUs (Building)

 

Continuing Education Credit Information

This webinar is open to the public and is designed to qualify for 3.0 PDHs for professional engineers and 3.0 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.

The American Institute of Architects Continuing Education System has approved this course for 3.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

The International Code Council has approved this event for .3 CEUs in the specialty area of Building (Preferred Provider No. 1232).

Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

On-Demand Credits

The preceding credit information only applies to the live presentation. This course in an on-demand format may not be eligible for the same credits as the live presentation; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:

3.0 HSW LUs (AIA)

Speakers

Greg Halsted, P.E.

Senior Director, Local Paving for the National Ready Mixed Concrete Association (NRMCA)

Mr. Halsted is responsible for increasing the paving market share for ready mixed concrete products through promotion, design, technical services, and construction activities at the local, regional, and state level. He has over 25 years of experience in the use of cement and concrete in the pavements and geotechnical industry. Senior Director, Local Paving for the National Ready Mixed Concrete Association (NRMCA) he has knowledge of planning, design, materials testing, construction, and sustainability; has participated in numerous training and construction workshops involving State and Provincial transportation agencies, Public Works departments, Universities, material suppliers, and consulting firms; and has authored several publications related to cement and concrete construction. Senior Director, Local Paving for the National Ready Mixed Concrete Association (NRMCA) Mr. Halsted currently serves as a voting member of several Transportation Research Board (TRB), American Concrete Institute (ACI), and ASTM International (ASTM) standing technical committees. He holds a B.S. degree in Civil Engineering Technology from Southern Polytechnic State University and is a licensed engineer in the state of Georgia. Prior to joining NRMCA, he held civil and geotechnical engineering positions with the Portland Cement Association, the Concrete Reinforcing Steel Institute, and the Georgia Department of Transportation.

AIA Info

AIA Provider Statement:

HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).

This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.

AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.

Course Title: Basics of Reinforced Concrete

Delivery Method: Live Online

Course Description: This three-hour course covers the basics of reinforced concrete for design professionals. The course will explore the purpose of reinforced concrete, the materials that can be used for reinforcement, applicable building codes and standards, common applications, and strategies to maintain and repair reinforced concrete.

Learning Objectives:

Learning Objective 1:
Learners will be able to define what constitutes reinforced concrete and explain its purpose.

Learning Objective 2:
Learners will be able to examine various materials that are used for reinforcement in concrete and reference related codes and standards.

Learning Objective 3:
Learners will be able to identify and analyze common applications for reinforced concrete such as beams, slabs, columns and walls.

Learning Objective 4:
Learners will be able to discuss methods of maintaining, diagnosing and repairing reinforced concrete.

LUs: 3.0                                                                                              LU Type: LU|HSWs.

Prerequisites: None

Advance Preparation: None

Program Level: Intermediate

Course Expiration Date: 01/29/2027

Complaint Resolution Policy:

Complaints regarding this course can be emailed to fchapman@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.