NFPA 70E, Part I
Wednesday, July 24, 2019, 11:00 AM – 3:30 PM CDT (incl. 30 min. break)

   The 2018 NFPA 70E

      • New editions

      • Global changes

      • Major changes (overview)

    Introduction to NFPA 70E

      • Purpose and scope

      • Arrangement and overview

      • Key definitions and new definitions

      • OSHA’s general duty clause vs. NFPA 70E provision

   General requirements

      • Electrical safety program

      • Hierarchy of risk control methods

      • Job safety planning and job briefing

      • Auditing

      • Requirements for electrical safety training

      • CAT tatings for meters

      • Test instruments and equipment

      • Use of electrical equipment

   Electric shock, arc flash and arc blast

      • General categories of electrical hazards

      • Effects of current

      • Logistics of an arc flash

      • Introduction to boundaries 

   Electrically safe work condition

      • Definition of an electrically safe work condition

      • Establishing and verifying an electrically safe work condition

      • Portable test instruments and permanently mounted test devices

NFPA 70E, Part II
Thursday, July 25, 2019, 11:00 AM – 3:30 PM CDT (incl. 30 min. break)

   The 2018 NFPA 70E

      • New editions

      • Global changes

      • Major changes (overview)

   Electrical hazards while working

      • Energized work

      • Energized electrical work permit

      • Shock risk assessment

      • Shock protection boundaries

      • Insulated tools and equipment

      • Arc flash risk assessment

      • Arc flash boundary

      • Equipment labeling

      • PPE table for incident energy analysis

      • Incident energy

   Personal Protective Equipment (PPE)

      • OSHA vs. NFPA 70E

      • Insulated rubber gloves

      • Personal protective clothing and equipment

      • Arc rating

      • Selection of PPE

      • Likelihood of occurrence of an arc flash

      • Normal and abnormal conditions of equipment

      • Arc-flash hazard PPE categories table

      • Personal Protective Equipment (PPE) table

      • Care of equipment

      • General requirements for PPE

      • Layering

      • Head, face, and eye protection

Webinar Instructions

All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.

Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.

Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.


GoToWebinar App requirements: 
Windows 7 – 10 or Mac OSX 10.9 (Mavericks) – 10.13 (High Sierra)

Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled

Internet connection:
 Minimum of 1Mbps       Hardware: 2GB RAM or more

For more information visit the Support section at


     8.0 HSW CE Hours

     8.0 HSW LUs

     8.0 PDHs

     .8 CEUs (Electrical)

Continuing Education Credit Information

These live, interactive webinars are designed to qualify for continuing education credit for professional engineers and architects in most states. Please see each webinar listing for the number of available continuing education credits. Course participants need to be aware of any licensing restrictions on online learning to fulfill their continuing education requirements.

HalfMoon Education Inc. is approved as a continuing education provider by the American Institute of Architects (No. J885). HalfMoon Education is an approved continuing education sponsor for engineers in Florida, Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700), North Carolina, and North Dakota. HalfMoon Education is deemed an approved continuing education sponsor for New York architects.

HalfMoon Education is an International Code Council Preferred Provider (No. 1322). CEUs are available for the National Electrical Code: Onsite Power Generation and Distribution and the NFPA 70E webinars.

Participation and knowledge retention will be verified for these webinar events. Certificates of completion will be provided upon successful completion of the quiz at the end of each webinar, and earned LUs will be reported to the AIA/CES.


Charles Miller

Master Electrician, business owner, author, educator in Lebanon, TN
Mr. Miller spent 18 years as a successful business owner and electrical contractor. Since then, he has focused his time and energy on writing and teaching to promote knowledge and proficiency among engineers, electricians, and tradespeople in the field. Throughout his career, he has passed more than 45 Master Electrical exams (with a score of 93 or higher) and seven Electrical Inspector exams. As an author and illustrator, he has an extensive list of electrical-related publications to his credit, including some published by the National Fire Protection Association (NFPA). Mr. Miller also sits on two NFPA committees, including the committee for the NFPA 70E standard.
“Even as an electrician and contractor working in commercial and industrial environments, I’ve always been a very visual person,” says Mr. Miller. “Codes and standards can be very difficult and very dry. As an instructor I try to convey the information in a way that enables my students to visualize more so they’ll retain the information and actually put it to good use.”
In 1988 he began to focus and dedicate himself to electrical-related training. Besides teaching his own custom tailored classes and seminars covering various aspects of the electrical industry, Mr. Miller partners with some of the top electrical training organizations in the country. His list of achievements include teaching with the National Fire Protection Association (NFPA).
His work as an author and illustrator includes: Illustrated Guide to the National Electrical Code (Delmar Cengage Learning, 1999 – present); “Code In Focus” column for Electrical Contractor magazine (1999 – present); Pocket Guide to Residential Electrical Installations (NFPA, 2001 – 2011); Pocket Guide to Commercial and Industrial Electrical Installations (NFPA, 2001 – present); Ugly’s Electrical References (Jones and Bartlett Learning, 2019); Ugly’s Electrical Safety and NFPA 70E (Jones and Bartlett Learning, 2011); The Electrician’s Exam Prep Manual (Jones and Bartlett Publishers, 2007); NFPA’s Pocket Electrical References (Jones and Bartlett Publishers, 2007); and NFPA’s Electrical References (NFPA, 2004). Mr. Miller served for more than three years as a co-host of “House Calls,” a home improvement radio talk show on 1510 AM WLAC in Nashville, Tennessee.

There are 2 Courses in This Seminar

NFPA 70E, Part I

NFPA 70E, Part I

July 24, 2019 Webinar Charles Miller
NFPA 70E, Part II

NFPA 70E, Part II

July 25, 2019 Webinar Charles Miller