Agenda

Webinar instructions will be emailed before the date of the webinar.

Please log into the webinar 15 – 30 minutes before the start time.

Thursday, February 22, 2024 
10:00 am – 1:30 pm CST

 

Presented by: Donald Taylor, CPD, GPD, FASPE

Agenda

  • Size domestic cold-water piping
  • Size domestic hot water piping
  • Size booster pumps
  • What is domestic hot water return (DHWR) used for
  • When do we provide a DHWR system
  • Laying out a DHWR system
  • Sizing DHWR piping
  • Sizing a circulation pump
  • Types of water heaters
  • Energy source for water heaters
  • Sizing a storage type water heater
  • Sizing an instantaneous water heater

   

Webinar Instructions

All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.

Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.

Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.

GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)

Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled.

Internet connection: Minimum of 1Mbps       Hardware: 2GB RAM or more

For more information, visit the Support section at www.gotowebinar.com

Credits

Engineers
3.0 PDHs

Architects
3.0 HSW CE Hours

AIA - American Institute of Architects
3.0 LU|HSW 

ICC - International Code Council
.3 CEUs (Building)

 

Continuing Education Credit Information

These webinars are open to the public and are designed to qualify for 3.0 PDHs for professional engineers and 3.0 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.

HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.

The American Institute of Architects Continuing Education System has approved each course for 3.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.

The International Code Council has approved each event for .3 CEUs in the specialty area of Building (Preferred Provider No. 1232).

Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).

On-Demand Credits

The preceding credit information only applies to the live presentation. This course in an on-demand format may not be eligible for the same credits as the live presentation; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:

3.0 HSW LUs (AIA)

Speakers

Donald Taylor, CPD, GPD, FASPE

Plumbing Designer IV - Engineering/Architecture/Construction/Consulting

Mr. Taylor grew up in Purvis, Mississippi. He earned his Bachelor of Science degree in Architectural Engineering Technology at the University of Southern Mississippi. He began his career as a plumbing designer in Houston straight out of college. Mr. Taylor began by designing different types of local commercial projects. After two years, he advanced to senior plumbing designer at HOK, one of the largest architectural/engineering firms in the world. There he gained experience working on international projects, learning to meet unusual criteria for a variety of clientele. After earning his certification in plumbing design, in a joint effort with a co-worker, he decided to start helping other designers in Houston prepare for the CPD exam. He has been teaching this course for roughly 18 years now and has expanded to the Society level both in and outside the United States. Mr. Taylor became a full member of ASPE in 2004 and served as a delegate at the 2004 convention in Cleveland, Ohio, 2010 convention in Philadelphia, Pennsylvania, 2012 Convention in Charlotte, North Carolina, 2014 Convention in Chicago, Illinois, 2018 Convention in Atlanta, Geogria and 2022 Convention in Indianapolis, Indiana. He is currently serving on the board of directors of the Houston Chapter as chair for the Board of Governors. Mr. Taylor served as co-chair, then chair of the ASPE Houston Product Show, as past Houston Chapter president and is currently on the Society Education Committee. With a coordinated effort, along with the DFW ASPE chapter, started the OKC ASPE chapter and was an interim president for two years. Mr. Taylor is currently at CRB as a senior plumbing/fire protection designer. After nine years in Houston, he decided to move to Norman, Oklahoma for a slower pace of life and to start a family. Before moving back to the Houston area, he was in Oklahoma for five years. Mr. Taylor has been back with the Houston Chapter of ASPE since 2013. He and his wife Jean are blessed with one child, Savannah Jane Taylor.

AIA Info

AIA Provider Statement:

HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).

This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.

AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.

Course Title: Water Systems Design for Non-Plumbing Professionals

Delivery Method: Live Online

Course Description: This three-hour course analyzes water system design, specifically piping, pumps, and heating. The course will examine the components and technology involved (water heaters, domestic hot water returns, booster pumps, circulation pumps, etc.) and discuss the design, sizing and layout of the systems.

Learning Objectives:

Learning Objective 1:
Learners will be able to explain the function of domestic hot water returns (DHWR), determine when to provide such a system, and consider layout and sizing.

Learning Objective 2:
Learners will be able to analyze and size domestic cold water piping, hot water piping, and booster pumps.

Learning Objective 3:
Learners will be able to identify the types of water heaters and their energy sources.

Learning Objective 4:
Learners will be able to explore strategies for sizing a storage type water heater, an instantaneous water heater, and circulation pumps.

LUs: 3.0                                                                                              LU Type: LU|HSWs.

Prerequisites: None

Advance Preparation: None

Program Level: Intermediate

Course Expiration Date: 06/29/2026

Complaint Resolution Policy:

Complaints regarding this course can be emailed to fchapman@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.