Structural Forensic Engineering of Buildings
Before undertaking any on-demand effort, you should review the rules of your licensing/certifying entity. It’s your responsibility to determine whether or not this on-demand course meets your continuing education requirements.
You must take and pass a quiz in order to receive credit. You can take the quiz as many times as needed and there is no time limit on the quiz. Once the quiz is completed, you will be asked to download your certificate.
Videos that qualify for AIA, LACES, ASLA, or CLARB credit will require an extra week for processing.
Available approximately 1 week after the date of the live event or the date of your order, whichever is later.
To track your purchase you will need to create an account on the website using the email address used for your registration.
The video will have occasional question prompts that will not allow the video to progress unless they are answered. You will not be able to skip forward while watching the video.
If you attempt to resume watching the video on a separate device, your progress will not be saved.
Click the link which appears at the end of the video to be taken to the course quiz.
HalfMoon will mail these materials via USPS. Please allow 2 weeks from the date of purchase to receive your product. If the live seminar is in the future, please allow 5 weeks from the date of the live seminar.
The link to the quiz will be available in a PDF in your USB drive marked QUIZ.
HalfMoon will contact you and issue a full refund if the product you ordered is not available. However, refunds will not be issued if completion certificates are requested.
Please contact HalfMoon Education if you have any questions during the process of taking this course. (715) 835-5900 or email@example.com
Webinar instructions will be emailed before the date of the webinar.
Please log into the webinar 15 – 30 minutes before start time.
Friday, January 20, 2023
9:00 am – 5:00 pm CST (including a 30-min. break)
James D’Aloisio P.E., LEED AP
Designing and Constructing to Prevent Failures
Importance of standards and codes
Design professional duties and the design process
Understanding the standard of care
Legal and economic impacts of failures
Purpose of forensic engineering
Understanding Causes of Structural Failures
Lessons learned from historic failures
Improper usage or modification
Deterioration and degradation
Combinations of causes
Understanding the Forensic Engineering Process
Documenting the failure
Conducting investigation and research
Test protocols and tests
Determining causation and responsibility
Learning from failure
Forensic Examination of Structures
Investigation of steel structures
Investigation of wood structures
Investigation of concrete structures
Investigation of masonry and building facades
Investigation of foundations
Load testing and instrumentation of existing structures
Using Forensic Engineering Information
Examining the forensic engineering report
Impact of forensic engineering information on post-failure disputes
Use of forensic engineering information in mediation, arbitration and litigation
The forensic engineer as consultant, expert and witness
Ethical Issues in Structural Engineering
Engineering Code of Ethics and failures
Each webinar session earns continuing education credit and can be registered for individually. All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.
Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.
Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.
GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled
Internet connection: Minimum of 1Mbps Hardware: 2GB RAM or more
For more information, visit the Support section at www.gotowebinar.com
7.0 HSW CE Hours
7.0 AIA LU|HSW
International Code Council:
.7 CEUs (Building)
Continuing Education Credit Information
This webinar is open to the public and is designed to qualify for 7.0 PDHs for professional engineers and 7.0 HSW continuing education hours for licensed architects in all states.
HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider No. 0004647), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.
The American Institute of Architects Continuing Education System has approved this course for 7.0 LU|HSW (Sponsor No. J885). Only full participation is reportable to the AIA/CES.
The International Code Council has approved this event for .7 CEUs in the specialty area of Building (Preferred Provider No. 1232).
Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).
James D'Aloisio P.E. SECB LEED APPrincipal with Klepper, Hahn & Hyatt in Syracuse
James D’Aloisio is a principal with Klepper, Hahn & Hyatt, a structural engineering, landscape architecture, and building envelope services firm in East Syracuse, New York. A graduate of Rensselaer Polytechnic Institute, Mr. D’Aloisio is a registered Professional Engineer in New York and Massachusetts. He is a member and past president (1997-1998) of the American Society of Civil Engineers (ASCE) Syracuse Section, and a member of the American Institute of Steel Construction (AISC), the American Concrete Institute (ACI), the National Society of Professional Engineers (NSPE), and the Structural Engineers Association of New York State (SEAoNY). Mr. D’Aloisio is a member of ASCE/SEI’s Frost-Protected Shallow Foundations Committee, the Structural Condition Assessment of Existing Buildings Committee, and the Sustainability Committee, where he currently serves as co-chair of the Thermal Bridging Working Group. Mr. D’Aloisio received the Order of the Engineer at Syracuse University in 1997. His 30-plus years’ experience as a consulting structural engineer has primarily involved the design of new building structures, additions, and modifications, and analyses, assessments, and investigations of structures and facades. Mr. D’Aloisio has performed structural condition reviews of over 15 million square feet of buildings and has performed over 150 structural forensic investigations. He has presented over 400 times.
AIA Provider Statement:
HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (firstname.lastname@example.org or (800) AIA 3837, Option 3).
This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.
AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
Course Title: Structural Forensic Engineering of Buildings
Delivery Method: Live Online
Course Description: This course examines the strategies used to prevent structural failures in the design and construction of buildings, explains the causes of structural failure and the forensic engineering process, reviews investigations of various structures, and provides guidance on the use of forensic engineering information and how to navigate ethical issues in structural engineering.
Learning Objective 1:
Learners will be able to identify the causes of structural failures, including design errors, defective construction, material deficiencies, excessive loading, improper usage or modification, deterioration and degradation, or a combination of causes.
Learning Objective 2:
Learners will be able to discuss the forensic engineering process, including the conducting of an investigation and research, test protocols and measurements, determination of causation and responsibility, and learning from failure.
Learning Objective 3:
Learners will be able to review the investigations of various types of structures, including steel, wood and concrete.
Learning Objective 4:
Learners will be able to discuss how to examine a forensic engineering report and how the information contained in it is used in mediation, arbitration and litigation.
LUs: 7.0 LU Type: LU|HSWs.
Prerequisites: Experience with structural design
Advance Preparation: None
Program Level: Intermediate
Course Expiration Date: 11/15/2025
Complaint Resolution Policy:
Complaints regarding this course can be emailed to email@example.com or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.