Structural Forensic Engineering
DISCLAIMER
Before undertaking any on-demand effort, you should review the rules of your licensing/certifying entity. It’s your responsibility to determine whether or not this on-demand course meets your continuing education requirements.
You must take and pass a quiz in order to receive credit. You can take the quiz as many times as needed and there is no time limit on the quiz. Once the quiz is completed, you will be asked to download your certificate.
Videos that qualify for AIA, LACES, ASLA, or CLARB credit will require an extra week for processing.
Streamable MP4/PDF
Available approximately 1 week after the date of the live event or the date of your order, whichever is later.
To track your purchase you will need to create an account on the website using the email address used for your registration.
The video will have occasional question prompts that will not allow the video to progress unless they are answered. You will not be able to skip forward while watching the video.
If you attempt to resume watching the video on a separate device, your progress will not be saved.
Click the link which appears at the end of the video to be taken to the course quiz.
USB MP4/PDF
HalfMoon will mail these materials via USPS. Please allow 2 weeks from the date of purchase to receive your product. If the live seminar is in the future, please allow 5 weeks from the date of the live seminar.
The link to the quiz will be available in a PDF in your USB drive marked QUIZ.
HalfMoon will contact you and issue a full refund if the product you ordered is not available. However, refunds will not be issued if completion certificates are requested.
Please contact HalfMoon Education if you have any questions during the process of taking this course. (715) 835-5900 or qchapman@halfmoonseminars.org
Agenda
Webinar instructions will be emailed before the date of the webinar.
Please log into the webinar 15 – 30 minutes before start time.
Day One: Wednesday, August 10, 2022
10:00 am – 1:30 pm CDT (including a 15-min. break)
Day Two: Thursday, August 11, 2022
10:00 am – 1:30 pm CDT (including a 15-min. break)
Presented by
Collins Ofori-Amanfo, P.E.
Agenda Day One
Examining the Role of Forensic Engineering
Causes and consequences of structural failures
Importance of good design
Impact of codes and standards
Legal and economic impacts of failures
Results and consequences of forensic engineering
Understanding the Forensic Engineering Process
Documenting the failure
Conducting investigation and research
Test protocols and tests
Determining causation and responsibility
Learning from failure
Preparing the Forensic Engineering Report
Identifying the report’s purpose and its audience
Examining content
Organizing the report
Evaluating sample reports
Agenda Day Two
Understanding Causes of Structural Failures
Material deficiencies
Design errors
Construction errors
Excessive loadings
Deterioration and degradation
Forensic Examination of Structures
Investigation of steel structures
Investigation of wood structures
Investigation of concrete structures
Investigation of masonry and building facades
Load testing and instrumentation of existing structures
Using Forensic Engineering Information in Litigation
Examining the nature of post-failure conflicts and disputes
Understanding the use of forensic engineering information in arbitration, litigation and mediation
Presenting forensic engineering information as an expert witness
• Expert witness qualifications
• Offering testimony as an expert witness
Webinar Instructions
All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.
Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.
Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.
GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)
Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled
Internet connection: Minimum of 1Mbps Hardware: 2GB RAM or more
For more information, visit the Support section at www.gotowebinar.com
Credits
Professional Engineers
6.5 PDHs
Architects
6.5 HSW CE Hours
6.5 AIA LU|HSW
International Code Council
.65 CEUs (Building)
Continuing Education Credit Information
This webinar is open to the public and offers 6.5 PDHs to professional engineers and 6.5 HSW continuing education hours to licensed architects in all states.
HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider No. 0004647), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.
The American Institute of Architects Continuing Education System has approved this course for 6.5 LU|HSWs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.
The International Code Council has approved this event for .65 CEUs in the specialty area of Building (Preferred Provider No. 1232).
Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).
Speakers
Collins Ofori-Amanfo, P.E.
Owner and Principal Engineer at Collins Forensics LLCMr. Ofori-Amanfo’s broad-based experience includes investigation of collapsed structures, investigation of construction defects and damage, investigation of condensation in building envelopes, evaluation of roof and wall leakage, field water spray testing of windows, and assessment of wind and hail damage. His work also involves giving expert testimony and assisting attorneys in resolving disputes over construction and materials-related problems. Prior to establishing Collins Forensics LLC, Mr. Ofori-Amanfo previously worked for many years at Wiss, Janney, Elstner Associates, Inc. (WJE), the Illinois Department of Transportation, and Twin City Testing Corporation. He received his B.S. degree in Civil Engineering from the University of Science and Technology in Ghana and his M.S. degree in Structural Engineering from the University of Minnesota, Minneapolis. Mr. Ofori-Amanfo is a registered professional engineer in Minnesota, Wisconsin, Iowa, Illinois, North Dakota, Nebraska, and Missouri.
AIA Info
AIA Provider Statement:
HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).
This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.
AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
Course Title: Structural Forensic Engineering
Delivery Method: Live Online
Course Description: This 6.5 hour live lecture presentation examines the role of forensic engineering, the forensic engineering process, preparing and reviewing forensic engineering reports, causes of structural failures, forensic examination of structures, and forensic engineering in determining fault.
Learning Objectives:
Learning Objective 1:
Learners will be able to describe common causes of structural failures, including design errors, defective construction, material deficiencies, excessive loading, and deterioration and degradation.
Learning Objective 2:
Learners will be able to describe the forensic engineering process for failures and explain how this information is used.
Learning Objective 3:
Learners will be able to describe the forensic engineering examination of of failures in steel, wood, concrete, and masonry structures.
Learning Objective 4:
Learners will be able to discuss how steel, wood, concrete, and masonry structures are examined and what the forensic expert is looking for, so the learner can increase her/her understanding of causation in each type of material.
LUs: 6.5 LU Type: LU|HSWs.
Prerequisites: Experience with design and construction
Advance Preparation: None
Program Level: Intermediate
Course Expiration Date: 10/19/2023
Complaint Resolution Policy:
Complaints regarding this course can be emailed to fchapman@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.