Structural Design for Wood Construction
DISCLAIMER
Before undertaking any on-demand effort, you should review the rules of your licensing/certifying entity. It’s your responsibility to determine whether or not this on-demand course meets your continuing education requirements.
You must take and pass a quiz in order to receive credit. You can take the quiz as many times as needed and there is no time limit on the quiz. Once the quiz is completed, you will be asked to download your certificate.
Videos that qualify for AIA, LACES, ASLA, or CLARB credit will require an extra week for processing.
Streamable MP4/PDF
Available approximately 1 week after the date of the live event or the date of your order, whichever is later.
To track your purchase you will need to create an account on the website using the email address used for your registration.
The video will have occasional question prompts that will not allow the video to progress unless they are answered. You will not be able to skip forward while watching the video.
If you attempt to resume watching the video on a separate device, your progress will not be saved.
Click the link which appears at the end of the video to be taken to the course quiz.
USB MP4/PDF
HalfMoon will mail these materials via USPS. Please allow 2 weeks from the date of purchase to receive your product. If the live seminar is in the future, please allow 5 weeks from the date of the live seminar.
The link to the quiz will be available in a PDF in your USB drive marked QUIZ.
HalfMoon will contact you and issue a full refund if the product you ordered is not available. However, refunds will not be issued if completion certificates are requested.
Please contact HalfMoon Education if you have any questions during the process of taking this course. (715) 835-5900 or qchapman@halfmoonseminars.org
Agenda
Webinar instructions will be emailed before the date of the webinar.
Please log into the webinar 15 – 30 minutes before start time.
Log into Webinar
8:00 – 8:30 am CDT
Morning Session
8:30 – 11:45 am CDT
Break
11:45 am – 12:45 pm CDT
Afternoon Session
12:45 – 5:00 pm CDT
Presented by
Marcus Woods
Structural Design for Wood Construction
Development of the National Design Specification for Wood Construction
Development of International Building Code
Code compliance and enforcement
Design Values, Requirements and Equations
Bending members
Compression members
Columns
Tension members
Combined loads
Structural Use of Sawn Lumber and Timber
Sawn lumber applications and design values
Timber poles and piles applications and design values
Structural Glued Laminated Timber
Types of products
Applications and design values
Prefabricated Wood I-Joists and Structural Composite Lumber
Types of products
Applications and design values
Prefabricated Wood Trusses and Wood Structural Panels
Applications and design values
Specification and installation
Designing Connections
Fire Protection Design
Webinar Instructions
All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.
Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.
Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.
GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)
Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled
Internet connection: Minimum of 1Mbps Hardware: 2GB RAM or more
For more information, visit the Support section at www.gotowebinar.com
Speakers
Marcus E. Woods, PE, MSc & LEED AP
Woods Residential Engineering & InspectionAfter working in engineering and design management with award-winning structural and construction firms for nearly 10 years, Marcus E. Woods founded his own firm, Woods Residential Engineering & Inspection. Mr. Woods is a licensed professional engineer in multiple states, holds a bachelor’s and master’s degree in Civil Engineering (with a focus on structures) from Washington University in St. Louis, and he has earned “Accredited Professional” status from the U.S. Green Building Council. Mr. Woods is a member of: The Woods Educational Enrichment Foundation, the National Society of Black Engineers (NSBE) (Director of Programs for the Chicago professional chapter), the American Society of Civil Engineers, and the Structural Engineers Association of Illinois.
AIA Info
AIA Provider Statement:
HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).
This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.
AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
Course Title: Structural Design for Wood Construction
Delivery Method: Live Online
Course Description: This 7 hour lecture presentation covers wood construction provisions in the International Building Code and wood construction standards of the National Design Specification for Wood Construction, design values, requirements and equations, structural use of sawn lumber and timber, structural glued laminated timber, prefabricated wood I-joists and structural composite lumber, prefabricated wood trusses and wood structural panels, and fire protection design.
Learning Objectives:
Learning Objective 1:
Learners will be able to reference design values, requirements, and equations for bending members, compression members, columns, tension members, and combined loads.
Learning Objective 2:
Learners will be able to identify and explain the structural applications for prefabricated wood I-joists, structural composite lumber, prefabricated wood trusses and wood structural panels. They will also be able to discuss fire protection design requirements.
Learning Objective 3:
Learners will be able to reference and comply with International Building Code provisions for wood construction and standards set by the National Design Specification for Wood Construction.
Learning Objective 4:
Learners will be able to identify and explain the structural applications for sawn lumber and timber and structural glued laminated timber.
LUs: 7.0 LU Type: LU|HSWs.
Prerequisites: Familiarity with basic structural design and construction concepts
Advance Preparation: None
Program Level: Intermediate
Course Expiration Date: 06/30/2024
Complaint Resolution Policy:
Complaints regarding this course can be emailed to fchapman@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.