Stormwater Modeling and Design with HydroCAD
Agenda
Webinar instructions will be emailed 24-48 business hours before the date of the webinar.
Please log into the webinar 15 – 30 minutes before start time.
Monday, April 28, 2025
9:00 am – 4:00 pm CDT
Attendees will need to download HydroCAD Sampler from:
https://www.hydrocad.net/sampler/index.htm
The HydroCAD Sampler is a functional evaluation program that allows users to create and save projects of up to 5 nodes. It provides most of the capabilities of the full HydroCAD program but is limited to 60 minutes of operation per session. It can be restarted any number of times. HydroCAD is Windows only .exe, so if this is an issue, please feel free to watch along during the presentation.
Agenda:
Presented by Scott Jeffers, PhD, PE
Fundamental Hydrology and Hydraulics Concepts
- The water cycle and the science of hydrology
- Defining the water budget
- Design storms vs historical rainfall events
- Natural vs urban hydrology
- Basic hydraulic principles and control structures
- Introduction to stormwater modeling applications
Basic Stormwater Calculations: Textbook Hand Calculations
- Conceptual design principles for stormwater detention ponds
- Total volume estimation: Using the Curve Number Method
- Storage volume calculations: Sizing detention basins
- Peak flow rate estimation: Rational Method applications
- Pipe and channel sizing: Manning’s Equation
- Practical application of calculations in stormwater design
Introduction to HydroCAD: Features and Operation
- Overview of HydroCAD capabilities
- Installation and setup
- Creating and managing projects
- Understanding the routing diagram
- Working with nodes and data entry
Hands-on Exercise: Designing a Stormwater Detention Pond
- Obtaining and inputting site data
- Setting up a stormwater detention pond in HydroCAD
- Model assumptions and calculations
- Reviewing and interpreting results
- Generating reports for regulatory approval
Detailed HydroCAD Inputs and Settings
- Subcatchment properties and parameter selection
- Pond properties and storage definitions
- Understanding HydroCAD’s help menu for troubleshooting
- IDF curve inputs and rainfall data configuration
- HydroCAD project settings and simulation adjustments
- Best practices for setting up and managing complex model
Advanced Stormwater Modeling and Data Integration
- Comparison of SWMM, HEC-RAS, and HydroCAD
- GIS integration for hydrologic/hydraulic modeling
- Evaluating design storms vs continuous rainfall patterns
- Data sources for model inputs
- City-wide master planning with hydrologic/hydraulic modeling
- Optimizing stormwater infrastructure through modeling
- Integrating field data and IoT monitoring
- Future trends in stormwater modeling and data-driven decision-making
Webinar Instructions
All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.
Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.
Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.
GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)
Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled
Internet connection: Minimum of 1Mbps Hardware: 2GB RAM or more
For more information, visit the Support section at www.gotowebinar.com
Credits
Engineers
6.0 PDHs*
Floodplain Managers
6.0 ASFPM CECs
Geologists
6.0 PDHs**
Continuing Education Information
This webinar is open to the public and is designed to qualify for 6.0 PDHs for professional engineers in most states that allow this learning method. *This course is not approved in New York; please refer to specific state rules to determine eligibility.
HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider License No: CEA362), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00049300) and North Carolina (S-0130).
This Association of State Floodplain Managers has approved this course for 6.0 CECs for floodplain managers.
**This webinar may offer up to 6.0 PDHs to licensed geologists and hydrologists in some states. HalfMoon Education has not applied for state geologist continuing education approval in states requiring such.
Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).
*On-Demand Credits*
The preceding credit information only applies to the live presentation. This course in an on-demand format may not be eligible for the same credits as the live presentation; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate.
Speakers
Scott Jeffers, PE, PhD
Water Resource EngineerDr. Scott Jeffers’s career focuses on urban water resources and green infrastructure collaborating with major municipalities internationally to address modern challenges in water, wastewater, and stormwater systems. Dr. Jeffers brings over 12 years’ experience in the water resource industry specializing in site and regional hydraulic/hydrologic modeling, permitting, capital improvement master planning, optimization/prioritization for asset management, IoT deployment, and a background in novel digital water techniques. Dr. Jeffers is a leading expert in EPA SWMM modeling and teaches hydrology and urban ecohydraulics at Drexel University. Recreationally, he is a musician and rock climber.