Special Inspections under Chapter 17 of the International Building Code
DISCLAIMER
Before undertaking any on-demand effort, you should review the rules of your licensing/certifying entity. It’s your responsibility to determine whether or not this on-demand course meets your continuing education requirements.
You must take and pass a quiz in order to receive credit. You can take the quiz as many times as needed and there is no time limit on the quiz. Once the quiz is completed, you will be asked to download your certificate.
Videos that qualify for AIA, LACES, ASLA, or CLARB credit will require an extra week for processing.
Streamable MP4/PDF
Available approximately 1 week after the date of the live event or the date of your order, whichever is later.
To track your purchase you will need to create an account on the website using the email address used for your registration.
For most customers, the videos run like most streaming videos on the web. For videos that qualify for AIA credit there will be occasional question prompts that will not allow the video to progress unless they are answered and you will not be able to skip forward while watching the video.
If you attempt to resume watching the video on a separate device, your progress will not be saved.
Click the link which appears at the end of the video to be taken to the course quiz.
USB MP4/PDF
HalfMoon will mail these materials via USPS. Please allow 2 weeks from the date of purchase to receive your product. If the live seminar is in the future, please allow 2 weeks from the date of the live seminar.
The link to the quiz will be available in a PDF in your USB drive marked QUIZ.
HalfMoon will contact you and issue a full refund if the product you ordered is not available. However, refunds will not be issued if completion certificates are requested.
Please contact HalfMoon Education if you have any questions during the process of taking this course. (715) 835-5900 or qchapman@halfmoonseminars.org
Agenda
Webinar instructions will be emailed before the date of the webinar.
Please log into the webinar 15 – 30 minutes before start time.
Tuesday, November 15, 2022
8:30 am – 4:30 pm CST (including a 30-min. break)
Presented by
James D’Aloisio, P.E., SECB, LEED AP
Agenda
Overview of Special Inspections under International Building Code
General program guidelines under International Building Code (IBC)
Special inspector qualifications
Testing and inspection agency accreditation
Forms, schedules and agreements
Pre-construction meeting
Report distribution
Soil and Foundation Inspections
Existing soil conditions
Site preparation
Shallow foundations
Deep foundations
Concrete and Masonry Construction Inspections
Concrete reinforcement, placement, testing and inspection
Curing concrete, hot- and cold-weather concrete
Pre-stressed and precast concrete
Masonry inspection frequency and material test methods
Mortar, grout, unit placement and reinforcement
Steel Inspections
Shop fabrication
Welds
Bolted connections
Pre-engineered metal buildings
Wood, Cold-Formed Steel, Wind and Seismic Design
AWC and AISI publication references in Code
Wood and CFS material standards, fasteners and connections
Lateral framing inspection practices
Seismic resistance/isolation systems
Exterior Insulation/Finishes and Fire Resistance/Smoke Control
Exterior insulation and finish systems
Fire resistant materials and sprayed fire-resistive material
Smoke control
Material Standards and Load Tests
Design strength of materials and alternative test procedures
In-situ load tests
Pre-construction load tests
Ethics, Non-Conformances and Final Reports
Inspector authority, conflicts and “soft skills”
Discrepancy documentation, tracking and resolution
Final report, required documentation and distribution
Webinar Instructions
All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.
Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.
Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.
GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)
Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled
Internet connection: Minimum of 1Mbps Hardware: 2GB RAM or more
For more information, visit the Support section at www.gotowebinar.com
Credits
Professional Engineers:
7.0 PDHs
Architects:
7.0 HSW CE Hours
7.0 AIA LU|HSWs
International Code Council:
.7 CEUs (Building)
Continuing Education Credit Information
This webinar is open to the public and is designed to qualify for 7.0 PDHs for professional engineers and 7.0 HSW continuing education hours for licensed architects in all states.
HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider No. 0004647), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.
The American Institute of Architects Continuing Education System has approved this course for 7.0 LU|HSWs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.
The International Code Council has approved this event for .7 CEUs in the specialty area of Building (Preferred Provider No. 1232).
Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).
Speakers
James A. D’Aloisio , P.E. LEED AP
Principal with Klepper, Hahn & Hyatt in SyracuseMr. D’Aloisio is a principal with Klepper, Hahn & Hyatt, a structural engineering, landscape architecture, and building envelope services firm in East Syracuse, New York. A graduate of Rensselaer Polytechnic Institute and is a registered professional engineer in New York and Massachusetts. He is a member and past president (1997 – 1998) of the American Society of Civil Engineers (ASCE) Syracuse Section, and a member of the American Institute of Steel Construction (AISC), the American Concrete Institute (ACI), the National Society of Professional Engineers (NSPE), and the Structural Engineers Association of New York State (SEAoNY). Mr. D’Aloisio is a member of ASCE/SEI’s Frost-Protected Shallow Foundations Committee, the Structural Condition Assessment of Existing Buildings Committee, and the Sustainability Committee. Mr. D’Aloisio received the Order of the Engineer at Syracuse University in 1997. His 30-plus years’ experience as a consulting structural engineer has primarily involved the design of new building structures, additions, and modifications, and analyses, assessments, and investigations of structures and facades. Mr. D’Aloisio has performed structural condition reviews of over 15 million square feet of buildings and he has performed over 150 structural forensic investigations. He has presented over 300 times.
AIA Info
AIA Provider Statement:
HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).
This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.
AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
Course Title: Special Inspections under Chapter 17 of the International Building Code
Delivery Method: Live Online
Course Description: This seven-hour course will cover what design professionals need to know about participating in the IBC Chapter 17 special inspections process, and will include information on recent updates to codes and standards that intersect with IBC Chapter 17.
Learning Objectives:
Learning Objective 1:
Learners will be able to review the general program guidelines under the International Building Code, as well as all applicable forms, schedules, agreements and reports related to special inspections.
Learning Objective 2:
Learners will be able to engage in soil and foundation (shallow and deep) inspections by analyzing and considering existing soil conditions.
Learning Objective 3:
Learners will be able to define requirements for structural steel construction inspections and verify the safety and efficacy of welded and bolted connections between structural steel components.
Learning Objective 4:
Learners will be able to engage in the inspection of exterior insulation, finishes, fire resistant materials and smoke control.
Learning Objective 5:
Learner will be able to utilize in-situ load tests and pre-construction load tests and review the design strength of materials.
LUs: 7.0 LU Type: LU|HSWs.
Prerequisites: Experience with construction materials, construction techniques, and code compliance
Advance Preparation: None
Program Level: Intermediate
Course Expiration Date:
Complaint Resolution Policy:
Complaints regarding this course can be emailed to fchapman@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.