Pump Station Design, Construction and Rehabilitation
Before undertaking any on-demand effort, you should review the rules of your licensing/certifying entity. It’s your responsibility to determine whether or not this on-demand course meets your continuing education requirements.
You must take and pass a quiz in order to receive credit. You can take the quiz as many times as needed and there is no time limit on the quiz. Once the quiz is completed, you will be asked to download your certificate.
Videos that qualify for AIA, LACES, ASLA, or CLARB credit will require an extra week for processing.
Available approximately 1 week after the date of the live event or the date of your order, whichever is later.
To track your purchase you will need to create an account on the website using the email address used for your registration.
The video will have occasional question prompts that will not allow the video to progress unless they are answered. You will not be able to skip forward while watching the video.
If you attempt to resume watching the video on a separate device, your progress will not be saved.
Click the link which appears at the end of the video to be taken to the course quiz.
HalfMoon will mail these materials via USPS. Please allow 2 weeks from the date of purchase to receive your product. If the live seminar is in the future, please allow 5 weeks from the date of the live seminar.
The link to the quiz will be available in a PDF in your USB drive marked QUIZ.
HalfMoon will contact you and issue a full refund if the product you ordered is not available. However, refunds will not be issued if completion certificates are requested.
Please contact HalfMoon Education if you have any questions during the process of taking this course. (715) 835-5900 or email@example.com
Webinar instructions will be emailed before the date of the webinar.
Please log into the webinar 15 – 30 minutes before start time.
Friday, August 11, 2023
9:00 am – 4:00 pm CDT
Pump Station Overview
- Historic background of pump stations
- Why construct a pump station? Types of pump stations
- Pump station standards, permits, governance
- Pump station uses – municipal, industrial, commercial
- Who pays for it?
Hydrology, Hydraulics, and Fundamentals of Fluid Flow
- Hydrologic balance, precipitation, hydrologic cycle, rational method
- Open channel, HGL vs. EGL
- Closed channel/pressure flow
Piping, Valves, Fittings, and Losses in Pumping Systems
- Minor losses
- Major losses
- Equivalent length
Pump Selection in Wastewater Pumping Stations
- Pump types – submersible/centrifugal
- Pump curves and selection
- Wet well/dry well pump station
- Sump pumps
Electrical Systems, Motors and Controls
- Power supply Motor types
- Electrical power system data sheet
- Emergency backup power
Pump Station/Force Main Rehabilitation, Testing, and Commissioning
- Inspection of existing facilities
- Rehabilitation vs. new construction
- Testing and commissioning
Each webinar session earns continuing education credit and can be registered for individually. All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.
Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.
Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.
GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled
Internet connection: Minimum of 1Mbps Hardware: 2GB RAM or more
For more information, visit the Support section at www.gotowebinar.com
6.0 HSW CE Hours
International Code Council:
.6 CEUs (Building)
Continuing Education Credit Information
This webinar is open to the public and is designed to qualify for 6.0 PDHs for professional engineers and 6.0 HSW continuing education hours for licensed architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.
HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider No. 0004647), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.
The American Institute of Architects Continuing Education System has approved this course for 6.0 HSW LUs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.
The International Code Council has approved this event for .6 CEUs in the specialty area of Building (Preferred Provider No. 1232).
Completion certificates will be awarded to participants who complete this event and earn a passing score (80%) on the quiz that follows the presentation (multiple attempts allowed).
The preceding credit information only applies to the live presentation. This course in an on-demand format may not be eligible for the same credits as the live presentation; please consult your licensing board(s) to ensure that a structured, asynchronous learning format is appropriate. The following pre-approvals may be available for the on-demand format upon request:
6.0 HSW LUs (AIA)
Michael A. Gallo, P.E.Project Manager, Washington D.C. Clean Rivers Project
Mr. Gallo is a civil engineer with more than 20 years of experience in the areas of water, wastewater, and stormwater infrastructure design, rehabilitation, and construction. He has worked in both consulting and government and is currently a project manager with Washington D.C.’s Clean Rivers Project. He is skilled in the design of wastewater and storm water conveyance systems, combined sewer overflow design, rehabilitation, construction, and contract management. He is a past NASSCO certified CIPP inspector, and is a licensed professional engineer in the state of Virginia.
AIA Provider Statement:
HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (firstname.lastname@example.org or (800) AIA 3837, Option 3).
This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.
AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
Course Title: Pump Station Design, Construction and Rehabilitation
Delivery Method: Live Online
Course Description: This course examines the design, construction, components, rehabilitation and commissioning of pump stations. The course begins with a general discussion on types of pump stations, how they are used, proper selection, and related permits and standards. The course then explains hydrology, hydraulics and the fundamentals of fluid flow before inspecting piping, valves, fittings, motors, controls and electrical system. The course concludes with a focus on rehabilitation, testing, and commissioning.
Learning Objective 1:
Learners will be able to identify types of pump stations, explain their uses in the municipal, industrial and commercial sectors, and discuss related standards and permits.
Learning Objective 2:
Learners will be able to identify types of pumps, including submersible, centrifugal and sump pumps, and select the appropriate type depending on the application.
Learning Objective 3:
Learners will be able to review power supply options, types of motors, emergency backup power solutions and an electrical power system data sheet.
Learning Objective 4:
Learners will be able to understand the inspection of existing facilities, discuss rehabilitation vs. new construction, and explore the testing and commissioning of new pump stations.
LUs: 6.0 LU Type: LU|HSWs.
Prerequisites: Experience with pumping and piping systems
Advance Preparation: None
Program Level: Intermediate
Course Expiration Date:
Complaint Resolution Policy:
Complaints regarding this course can be emailed to email@example.com or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.