How to Design a Reinforced Slope
Before undertaking any on-demand effort, you should review the rules of your licensing/certifying entity. It’s your responsibility to determine whether or not this on-demand course meets your continuing education requirements.
You must take and pass a quiz in order to receive credit. You can take the quiz as many times as needed and there is no time limit on the quiz. Once the quiz is completed, you will be asked to download your certificate.
Videos that qualify for AIA, LACES, ASLA, or CLARB credit will require an extra week for processing.
Available approximately 1 week after the date of the live event or the date of your order, whichever is later.
To track your purchase you will need to create an account on the website using the email address used for your registration.
The video will have occasional question prompts that will not allow the video to progress unless they are answered. You will not be able to skip forward while watching the video.
If you attempt to resume watching the video on a separate device, your progress will not be saved.
Click the link which appears at the end of the video to be taken to the course quiz.
HalfMoon will mail these materials via USPS. Please allow 2 weeks from the date of purchase to receive your product. If the live seminar is in the future, please allow 5 weeks from the date of the live seminar.
The link to the quiz will be available in a PDF in your USB drive marked QUIZ.
HalfMoon will contact you and issue a full refund if the product you ordered is not available. However, refunds will not be issued if completion certificates are requested.
Please contact HalfMoon Education if you have any questions during the process of taking this course. (715) 835-5900 or firstname.lastname@example.org
Webinar instructions will be emailed before the date of the webinar.
Please log into the webinar 15 – 30 minutes before start time.
Thursday, November 10, 2022
10:00 am – 12:00 pm CDT
Bill Simpson, P.E.
Geosynthetic properties for use in slope stabilization
Deep seated stability analysis
Equations, calculations, and example of using geosynthetics to reinforce a slope
Case histories of deep seated, rotational failures and other slope failures
Soil properties and conditions that contribute to slope stability
Material required for the exposed face of the slope to maintain long term stability
All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.
Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.
Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.
GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled
Internet connection: Minimum of 1Mbps Hardware: 2GB RAM or more
For more information, visit the Support section at www.gotowebinar.com
2.0 HSW CE Hours
2.0 AIA LU|HSW
2.0 HSW CE Hours
2.0 LA CES HSW PDHs
2.0 ASFPM CECs
International Code Council:
.2 CEUs (Sitework)
Continuing Education Credit Information
This webinar is open to the public and is designed to offer 2.0 PDHs to professional engineers, 2.0 HSW continuing education hours to licensed architects, and 2.0 HSW continuing education hours to landscape architects in all states that allow this learning method. Please refer to specific state rules to determine eligibility.
HalfMoon Education is an approved continuing education sponsor for engineers in Florida (Provider No. 0004647), Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700) and North Carolina (S-0130). HalfMoon Education is deemed an approved continuing education sponsor for New York engineers and architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other states do not preapprove continuing education providers or courses.
The American Institute of Architects Continuing Education System has approved this course for 2.0 LU|HSWs (Sponsor No. J885). Only full participation is reportable to the AIA/CES.
The Landscape Architecture Continuing Education System has approved this course for 2.0 HSW PDHs. Only full participation is reportable to the LA CES.
The International Code Council has approved this event for .2 CEUs in the specialty area of Sitework (Preferred Provider No. 1232).
This webinar has been approved by the Association of State Floodplain Managers for 2.0 CECs for floodplain managers.
Attendance will be monitored, and attendance certificates will be available after the webinar for those who attend the entire course and score a minimum 80% on the quiz that follows the course (multiple attempts allowed).
Bill Simpson, P.E.Geotechnical Structure Design Specialist at Gradelta Engineering
Mr. Simpson founded Gradelta Engineering in 2020 with the intent to help clients better understand the combination of geotechnical and structural engineering that he has worked with for the past 20 years. He earned his B.S.C.E. and M.S.C.E. degrees from Georgia Institute of Technology. He currently provides engineering services to contractors and fellow engineers for earth structure pricing, along with the plans and calculations needed for construction. He frequently consults with clients regarding the optimal structure type and location on the construction site to minimize risk and maximize useable space. He also works in the education sector providing not just seminars such as this one, but also acting as a subject matter expert creating study guide and test prep content for the NCEES Professional Civil Engineer exam. Mr. Simpson has also worked with lawyers and insurance companies during forensic investigation and lawsuits surrounding retaining walls and slope failures. His hope is that through the instructional services that he currently provides, slopes will remain stable and retaining wall failure will be eliminated.
AIA Provider Statement:
HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (email@example.com or (800) AIA 3837, Option 3).
This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.
AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
Course Title: How to Design a Reinforced Slope
Delivery Method: Live Online
Course Description: This course covers slope reinforcement, including the types of failures and methods and materials used to address them, such as geosynthetics.
Learning Objective 1:
Learners will be able to identify geosynthetic properties for use in slope stabilization, and will be able to study equations, calculations and examples of geosynthetic design and construction.
Learning Objective 2:
Learners will be able to discuss and analyze case histories of deep seated, rotational and other slope failures.
Learning Objective 3:
Learners will be able to explain soil properties and conditions that contribute to slope stability.
Learning Objective 4:
Learners will be able to determine which materials to use on the exposed face of a slope to maintain long term stability.
LUs: 2.0 LU Type: LU|HSWs.
Prerequisites: Experience with site development and earthwork
Advance Preparation: None
Program Level: Intermediate
Course Expiration Date: 08/13/2024
Complaint Resolution Policy:
Complaints regarding this course can be emailed to firstname.lastname@example.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.