Agenda

Webinar instructions will be emailed before the date of the webinar.

Please log into the webinar 15 – 30 minutes before start time.

Thursday, August 12, 2021
11:00 am – 1:00 pm CDT

 

Presented by
Patrick J. Conlon, P.E.

Agenda:
Wood frame
• Short history of the development of conventional wood framing American Wood Council’s National Design Specification for Wood Construction
• Wood framing provisions of the International Building Code
• ASCE-7 load combinations
• Project conception and material choices
• Prescriptive design for wind and seismic loads
Steel frame
• AISC and AISI Code applicability
• Project conception and material choices
• Schematic design choices
Conceptual framing decisions

 

Webinar Instructions

Each webinar session earns continuing education credit and can be registered for individually. All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.

Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.

Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.

GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)

Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled


Internet connection:
 Minimum of 1Mbps       Hardware: 2GB RAM or more

For more information, visit the Support section at www.gotowebinar.com

Credits

Professional Engineers:
2.0 PDHs

Architects:
2.0 HSW CE Hours

AIA:    (AIA credits only available for attending live Webinar)
2.0 LU|HSW

International Code Council:
.2 CEUs (Building)

 

Continuing Education Credit Information
See each course listing for the type and amount of each continuing education credit available. Individual courses for engineers and architects are not subject to pre-approval. HalfMoon Education does not apply for landscape courses in FL, NC, and NJ or land surveyor courses in NJ or TN, unless expressly stated.

HalfMoon Education Certifying Entities
American Institute of Architects Continuing Education System (No. J885)
International Code Council (No. 1232)
Landscape Architect Continuing Education System
American Institute of Certified Planners (AICP)
Boards of Engineering: Florida (No. 0004647), Indiana (License No. CE21700059),
Maryland, New Jersey (Approval No. 24GP00000700), North Carolina (No. S-0130),
and North Dakota.
Course-by-Course Providers:
Association of State Floodplain Managers
International Society of Arboriculture
Society of American Foresters

HalfMoon Education is deemed a New York-approved continuing education provider for engineers, architects, and landscape architects via its registration with the American Institute of Architects Continuing Education System (Regulations of the Commissioner §68.14(i)(2), §69.6(i)(2), and §79-1.5(i)(2)).

Completion certificates will be awarded to participants who complete this event, respond to prompts, and earn a passing score (80%) on the quiz that follows the presentation (multiple attempts allowed).

Speakers

Patrick Conlon, P.E.

Patrick Conlon Founder and Managing Principal of Conlon Engineering, LLC
Patrick Conlon is a licensed professional engineer with 20+ years of high-profile structural engineering experience. He has lent his expertise and creativity to challenging high-profile construction projects including the iconic Yankee Stadium, the 75-story tall One57 in Manhattan, the new 22,000 sf steel-framed column-free Blessed Kateri Church in Lagrangeville, New York, numerous custom luxury homes, and numerous interesting projects of various scales. The owners, architects, contractors, and property managers with whom he collaborates seek him out as a partner because of experience, talents, and client focused service.  As founder and managing principal of Conlon Engineering, LLC, in Brookfield, Connecticut, Mr. Conlon has created a culture that is highly client-focused and disciplined, making it easy for colleagues to recommend him. He takes great pride in the firm’s ability to address structural challenges for diverse clients in the areas of new construction, renovation, and structural rehabilitation of existing structures.  Conlon Engineering’s portfolio includes a variety of categories such as commercial, residential, industrial, office, school, religious, historic and recreational buildings; adaptive reuse projects; LEED accredited projects; peer reviews of other engineers’ work; and feasibility studies. Mr. Conlon is a registered professional engineer in Connecticut, New York, New Jersey,  Massachusetts and South Carolina. He has BS and MS degrees in Civil Engineering from Manhattan College, and he is a member of the American Society of Civil Engineers, the Structural Engineers Coalition (CT), the International Code Council, and the American Institute of Steel Construction. 

AIA Info

AIA Provider Statement:

HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).

This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.

AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.

Course Title: Deep Dive into Wood and Steel Frame Fundamentals for Residential and
Small Commercial Buildings

Delivery Method: Live Online

Course Description: This course examines the IBC ASCE-7 provisions for load combinations, the American Wood Council’s National Design Specification for Wood Construction and the AISC and AISI Code applicability for steel frame buildings It also examines material selections and design considerations.

Learning Objectives:

Learning Objective 1:
Learners will be able to reference and comply with the American Wood Council’s National Design Specification for Wood Construction and the wood framing provisions of the International Building Code ASCE-7 for load combinations for conventional wood framing that will withstand loads and protect occupants.

Learning Objective 2:
Learners will be able to assist on project conception and material choices for wood framing of homes and small commercial buildings that meet building code standards.

Learning Objective 3:
Learners will be able to determine the applicability of AISC and AISI code requirements for steel frame residential and small commercial buildings.

Learning Objective 4:
Learners will be able to assist on project conception and material choices for wood framing of homes and small commercial buildings that meet building code standards.

LUs: 2.0                                                                                              LU Type: LU|HSWs.

Prerequisites: Experience with design and construction and code interpretation and recommendations

Advance Preparation: None

Program Level: Intermediate

Course Expiration Date: 06/04/2024

Complaint Resolution Policy:

Complaints regarding this course can be emailed to doug@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.

Streamable MP4/PDF Price: $110.00

DISCLAIMER

Before undertaking any on-demand effort, you should review the rules of your licensing/certifying entity. It’s your responsibility to determine whether or not this on-demand course meets your continuing education requirements.

You must take and pass a quiz in order to receive credit. You can take the quiz as many times as needed and there is no time limit on the quiz. Once the quiz is completed, you will be asked to download your certificate.

Videos that qualify for AIA, LACES, ASLA, or CLARB credit will require an extra week for processing.

Streamable MP4/PDF

Available approximately 1 week after the date of the live event or the date of your order, whichever is later.

To track your purchase you will need to create an account on the website using the email address used for your registration.

The video will have occasional question prompts that will not allow the video to progress unless they are answered. You will not be able to skip forward while watching the video.

If you attempt to resume watching the video on a separate device, your progress will not be saved.

Click the link which appears at the end of the video to be taken to the course quiz.

USB MP4/PDF

HalfMoon will mail these materials via USPS. Please allow 2 weeks from the date of purchase to receive your product. If the live seminar is in the future, please allow 5 weeks from the date of the live seminar.

The link to the quiz will be available in a PDF in your USB drive marked QUIZ.

HalfMoon will contact you and issue a full refund if the product you ordered is not available. However, refunds will not be issued if completion certificates are requested.

Please contact HalfMoon Education if you have any questions during the process of taking this course. (715) 835-5900 or qchapman@halfmoonseminars.org