Basics of Structural Steel Design
DISCLAIMER
Before undertaking any on-demand effort, you should review the rules of your licensing/certifying entity. It’s your responsibility to determine whether or not this on-demand course meets your continuing education requirements.
You must take and pass a quiz in order to receive credit. You can take the quiz as many times as needed and there is no time limit on the quiz. Once the quiz is completed, you will be asked to download your certificate.
Videos that qualify for AIA, LACES, ASLA, or CLARB credit will require an extra week for processing.
Streamable MP4/PDF
Available approximately 1 week after the date of the live event or the date of your order, whichever is later.
To track your purchase you will need to create an account on the website using the email address used for your registration.
For most customers, the videos run like most streaming videos on the web. For videos that qualify for AIA credit there will be occasional question prompts that will not allow the video to progress unless they are answered and you will not be able to skip forward while watching the video.
If you attempt to resume watching the video on a separate device, your progress will not be saved.
Click the link which appears at the end of the video to be taken to the course quiz.
USB MP4/PDF
HalfMoon will mail these materials via USPS. Please allow 2 weeks from the date of purchase to receive your product. If the live seminar is in the future, please allow 2 weeks from the date of the live seminar.
The link to the quiz will be available in a PDF in your USB drive marked QUIZ.
HalfMoon will contact you and issue a full refund if the product you ordered is not available. However, refunds will not be issued if completion certificates are requested.
Please contact HalfMoon Education if you have any questions during the process of taking this course. (715) 835-5900 or qchapman@halfmoonseminars.org
Agenda
Webinar instructions will be emailed before the date of the webinar.
Please log into the webinar 15 – 30 minutes before start time.
Thursday, August 5, 2021
8:30 am – 3:45 pm CDT (incl. a 45-min break)
Presented by:
Robert P. Schaffer, P.E.
Agenda
Preliminary Concepts of Structural Steel Design
Design theory
Design objectives
ASD vs. LRFD
Loads and load combinations
Structural Steel Flexural and Compression Members
Flexural members
• Forces on members
• Flexural member design
Compression members
• Forces on members
• Compression member design
Structural Steel Tension Members and Connection Design
Tension members
• Forces on members and connections
• Tension member design
• Tensile effects and failures
• Load transfer and connection design
Bolted connections
• Bolt design, size, spacing, and failures
Welded connections
• Weld design and weld failures
Combined Forces, Combined Loads and Structural Steel Applications
Combined forces, combined loads
Structural steel applications and case studies
Commercial and industrial buildings
Residences
Parking structures
Bridges
Webinar Instructions
All attendees must log-on through their own email – attendees may not watch together if they wish to earn continuing education credit. HalfMoon Education Inc. must be able to prove attendance if either the attendee or HalfMoon Education Inc. is audited.
Certificates of completion can be downloaded in PDF form upon passing a short quiz. A link to the quiz will be sent to each qualifying attendee immediately after the webinar. The certificate can be downloaded from the Results page of the quiz upon scoring 80% or higher.
Webinars are presented via GoToWebinar, an easy-to-use application that can be run on most systems and tablets. Instructions and login information will be provided in an email sent close to the date of the webinar. It is highly recommended that you download, install and test the application before the webinar begins by clicking on the link in the email.
GoToWebinar App requirements:
Windows 7 – 10 or Mac OSX Mavericks (10.9) – macOS Catalina (10.15)
Web Browser:
The two most recent version of the following browsers:
Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge
Internet Explorer v11 (or later) with Flash enabled
Internet connection: Minimum of 1Mbps Hardware: 2GB RAM or more
For more information, visit the Support section at www.gotowebinar.com
Credits
Professional Engineers:
6.0 PDHs
Architects:
6.0 HSW CE Hours
AIA: (AIA credits only available for attending live Webinar)
6.0 LU|HSW
International Code Council:
.6 CEUs (Building)
Continuing Education Credit Information
Basics of Structural Steel Design
This webinar offers 6.0 PDHs to professional engineers and 6.0 HSW continuing
education hours to architects licensed in all states.
HalfMoon Education is an approved continuing education sponsor for engineers in
Florida (Provider No. 0004647), Indiana (License No. CE21700059), Maryland, New
Jersey (Approval No. 24GP00000700), and North Carolina (S-0130). HalfMoon Education
is deemed an approved continuing education sponsor for New York engineers and
architects via its registration with the American Institute of Architects Continuing
Education System (Regulations of the Commissioner §68.14(i)(2) and §69.6(i)(2)). Other
states do not preapprove continuing education providers or courses.
The American Institute of Architects Continuing Education System has approved this
course for 6.0 LU|HSW (Sponsor No. J885). Only full participation is reportable to the
AIA/CES.
The International Code Council has approved this event for .6 CEUs in the specialty area
of Building (Preferred Provider No. 1232).
Completion certificates will be awarded to participants who complete this event, respond
to all prompts, and earn a passing score (80%) on the quiz that follows the presentation
(multiple attempts allowed).
Speakers
Robert P. Schaffer, P.E.
WZG Structural Engineers, Zieglerville, PAMr. Schaffer is the Associate Principal at WZG Structural Engineers and has 20 years of experience in structural analysis and design throughout the Mid-Atlantic region. He is a graduate of Penn State University Architectural Engineering program with an emphasis in Structural Engineering and has project experience in commercial, higher education, industrial, pharmaceutical, hospital/life care and multi-family residential markets. In 2012, he was selected by Consulting Specifying Engineer Magazine as a Top 40 Under 40 for his achievements in structural engineering.
AIA Info
AIA Provider Statement:
HalfMoon Education Inc. is a registered provider of AIA-approved continuing education under Provider Number J885. All registered AIA/CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider of learning program may be sent to AIA/CES (cesupport@aia.org or (800) AIA 3837, Option 3).
This learning program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.
AIA continuing education credit has been reviewed and approved by AIA/CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
Course Title: Basics of Structural Steel Design
Delivery Method: Live Online
Course Description: This six-hour live lecture presentation examines preliminary concepts of structural steel design, flexural members, compression members, tension members, combined forces and combined loads, connection design, and structural steel applications, including commercial and industrial buildings, residential buildings, parking structures and bridges.
Learning Objectives:
Learning Objective 1:
Learners will be able distinguish between allowable stress design (ASD) and load and resistance factor design (LRFD) in the design of steel buildings.
Learning Objective 2:
Learners will be able to describe forces on structural steel members, including tension forces and compression forces.
Learning Objective 3:
Learners will be able to describe strategies for designing connections between structural steel members, including bolted connections and welded connections.
Learning Objective 4:
Learners will be able to identify appropriate applications for structural steel design and construction, including commercial and industrial buildings, parking structures and bridges.
LUs: 6.0 LU Type: LU|HSWs.
Prerequisites: Experience with structural design
Advance Preparation: None
Program Level: Intermediate
Course Expiration Date: 04/01/2024
Complaint Resolution Policy:
Complaints regarding this course can be emailed to doug@halfmoonseminars.org or by calling (715) 835-5900. A HalfMoon Education representative will respond within 72 hours to resolve the complaint, which will include, but not limited to, access to another CE activity at no or reduced cost or a full or partial refund. Each instance will be resolved on a case-by-case situation.