Structural Design Loads Under the ASCE 7 Standard
Before undertaking any on-demand effort, you should review the rules of your licensing/certifying entity. It’s your responsibility to determine whether or not this on-demand course meets your continuing education requirements.
You must take and pass a quiz in order to receive credit. You can take the quiz as many times as needed and there is no time limit on the quiz. Once the quiz is completed, you will be asked to download your certificate.
Videos that qualify for AIA, LACES, ASLA, or CLARB credit will require an extra week for processing.
Available approximately 1 week after the date of the live event or the date of your order, whichever is later.
To track your purchase you will need to create an account on the website using the email address used for your registration.
The video will have occasional question prompts that will not allow the video to progress unless they are answered. You will not be able to skip forward while watching the video.
If you attempt to resume watching the video on a separate device, your progress will not be saved.
Click the link which appears at the end of the video to be taken to the course quiz.
HalfMoon will mail these materials via USPS. Please allow 2 weeks from the date of purchase to receive your product. If the live seminar is in the future, please allow 5 weeks from the date of the live seminar.
The link to the quiz will be available in a PDF in your USB drive marked QUIZ.
HalfMoon will contact you and issue a full refund if the product you ordered is not available. However, refunds will not be issued if completion certificates are requested.
Please contact HalfMoon Education if you have any questions during the process of taking this course. (715) 835-5900 or email@example.com
Registration: 8:00 – 8:30 am
Morning Session: 8:30 – 11:45 am
Lunch (On your own): 11:45 am – 12:45 pm
Afternoon Session: 12:45 – 5:00 pm
Understanding Structural Loads
Types of structural loads
General structural integrity
Classifying buildings and structures
Modifying and expanding existing structures
Dead Loads and Soil Loads
Weight of materials and structure
Required live loads
Snow and Ice Loads
Calculating snow and ice loads
Unbalanced, drifting and sliding loads
Wind speed, importance factor, exposure, enclosure
Basic definitions and requirements
Main wind force resisting system
Scope and applicability
Seismic ground motion values/geotechnical investigation
Seismic design category
Design criteria for bearing walls/building frame systems
Design requirements for non-structural components
Application of loads
7.0 Continuing Ed. Hours
7.0 HSW Continuing Ed. Hours
7.0 AIA HSW Learning Units
International Code Council
.7 CEUs (Building)
Non-Credit Continuing Ed.
Continuing Education Credit Information
This seminar is open to the public and offers up to 7.0 continuing education hours to professional engineers and 7.0 HSW continuing education hours to architects in all states, except Florida architects.
HalfMoon Education is an approved continuing education provider for New York engineers (NYSED Sponsor No. 35).
HalfMoon Education is deemed a New York-approved continuing education provider for architects via its affiliation with the American Institute of Architects.
This event is approved by the American Institute of Architects for 7.0 HSW Learning Units (Sponsor No. J885). Only full attendance can be reported to the AIA/CES. Courses approved by the AIA qualify for New Jersey architects.
HalfMoon Education is an approved continuing education sponsor for engineers in Florida, Indiana (License No. CE21700059), Maryland, New Jersey (Approval No. 24GP00000700), North Carolina, and North Dakota. HalfMoon Education is deemed an approved continuing education sponsor for New York architects.
The International Code Council has approved this event for .7 CEUs in the specialty area of Building.
This event offers a non-credit continuing education opportunity to construction contractors. It has not been approved by any state with a continuing education requirement for contractors.
Attendance will be monitored, and attendance certificates will be available after the seminar for most individuals who complete the entire event. Attendance certificates not available at the seminar will be mailed to participants within fifteen business days.
Robin M. Closs
Robin M. Closs has 15 years of experience as a structural engineer designing and analyzing anything from pipes to multistory buildings in fields such as commercial, power, government, institutional, nuclear, industrial, and residential. She traveled to Long Island in the aftermath of Hurricane Sandy as part of a Code Enforcement Disaster Assistance Response Team. Her engineering knowledge in timber, concrete, steel, masonry, aluminum, and light gauge metal has helped her design new buildings, complete renovations and additions, demolish existing structures, produce mechanical platforms, and design appropriate repairs to roofs, walls, floors, and spillways. Ms Closs is the president of The Engineering Society of Buffalo and currently creates, writes, and edits their newsletter. She also regularly spends time tutoring and greatly enjoys assisting young minds to see the benefits of engineering. She has also acted as the principal coordinator for 80-person volunteer teams, judged inventions, and mentored winners of engineering city competitions. Ms Closs graduated from the Milwaukee School of Engineering with a BS degree in Architectural Engineering with a Structural Specialty. She is a licensed professional engineering in multiple states, is a licensed structural engineer in Illinois, and is certified as a NCEES Model Law Structural Engineer. Her goal is to meet client needs in a positive and timely fashion.